Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2015-04-25 21:40:25
From: ike
Description: pcengines alix3d3 running pfSense 2.1.5
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p16 #0: Mon Aug 25 08:29:45 EDT 2014
[_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wrap_vga.8.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x5a2 Family = 5 Model = a Stepping = 2
Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
real memory = 259784704 (247 MB)
avail memory = 231018496 (220 MB)
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc073aa90, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc073ab30, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc073abd0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
K6-family MTRR support enabled (2 registers)
ACPI Error: A valid RSDP was not found (20101013/tbxfroot-309)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xee000000-0xeeffffff,0xefff0000-0xefff3fff,0xeffec000-0xeffeffff,0xeffe8000-0xeffebfff,0xefff8000-0xefffbfff irq 10 at device 1.1 on pci0
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xfc00-0xfcff mem 0xeffff000-0xeffff0ff irq 11 at device 9.0 on pci0
vr0: Quirks: 0x2
vr0: Revision: 0x96
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: [ITHREAD]
ath0: <Atheros 5413> mem 0xeffd0000-0xeffdffff irq 10 at device 12.0 on pci0
ath0: [ITHREAD]
ath0: AR5413 mac 10.5 RF5413 phy 6.1
isab0: <PCI-ISA bridge> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 15.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq 5 at device 15.4 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xefffd000-0xefffdfff irq 5 at device 15.5 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <AMD CS5536 (Geode) USB 2.0 controller> on ehci0
cpu0 on motherboard
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd27ff,0xef000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
Timecounter "TSC" frequency 498054211 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ad0: DMA limited to UDMA33, device found non-ATA66 cable
ad0: 1911MB <LEXAR ATA FLASH CARD 20070228> at ata0-master UDMA33
ugen0.1: <AMD> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Root mount waiting for: usbus1 usbus0
uhub0: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
Trying to mount root from ufs:/dev/ufs/pfsense0
ugen0.2: <ORTEK> at usbus0
uhub2: <ORTEK USB Keyboard Hub, class 9/0, rev 1.10/1.10, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.3: <ORTEK> at usbus0
ukbd0: <ORTEK USB Keyboard Hub, class 0/0, rev 1.10/1.10, addr 3> on usbus0
kbd2 at ukbd0
wlan0: changing name to 'ath0_wlan1'
wlan1: changing name to 'ath0_wlan2'
vr0: link state changed to DOWN
vr0: link state changed to UP
pflog0: promiscuous mode enabled
wlan2: changing name to 'ath0_wlan0'
wlan3: changing name to 'ath0_wlan0_'
vr0: promiscuous mode enabled
ath0_wlan1: promiscuous mode enabled
ath0_wlan2: promiscuous mode enabled
ath0_wlan2: promiscuous mode disabled
ath0_wlan1: promiscuous mode disabled
vr0: promiscuous mode disabled
vr0: promiscuous mode enabled
ath0_wlan1: promiscuous mode enabled
ath0_wlan2: promiscuous mode enabled
stray irq7
ugen0.2: <ORTEK> at usbus0 (disconnected)
uhub2: at uhub0, port 1, addr 2 (disconnected)
ugen0.3: <ORTEK> at usbus0 (disconnected)
ukbd0: at uhub2, port 3, addr 3 (disconnected)
too many stray irq 7's: not logging anymore
ugen0.2: <ORTEK> at usbus0
uhub2: <ORTEK USB Keyboard Hub, class 9/0, rev 1.10/1.10, addr 2> on usbus0
uhub2: 3 ports with 2 removable, bus powered
ugen0.3: <ORTEK> at usbus0
ukbd0: <ORTEK USB Keyboard Hub, class 0/0, rev 1.10/1.10, addr 3> on usbus0
kbd2 at ukbd0
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled