Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2015-04-26 18:42:01
From: FAndrey
Description: FreeBSD CURRENT (r282020 armv6) on a BeagleBone Black
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r282020: Sun Apr 26 19:05:31 MSK 2015 arm
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Cortex A8-r3 rev 2 (Cortex-A core)
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
 WB disabled EABT branch prediction enabled
LoUU:2 LoC:3 LoUIS:1 
Cache level 1: 
 32KB/64B 4-way data cache WT WB Read-Alloc
 32KB/64B 4-way instruction cache Read-Alloc
Cache level 2: 
 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory  = 536870912 (512 MB)
avail memory = 513081344 (489 MB)
Texas Instruments AM3358 Processor, Revision ES1.1
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
aintc0: <TI AINTC Interrupt Controller> mem 0x48200000-0x48200fff on simplebus0
aintc0: Revision 5.0
ti_scm0: <TI Control Module> mem 0x44e10000-0x44e11fff on simplebus0
am335x_prcm0: <AM335x Power and Clock Management> mem 0x44e00000-0x44e012ff on simplebus0
am335x_prcm0: Clocks: System 24.0 MHz, CPU 1000 MHz
am335x_dmtimer0: <AM335x DMTimer> mem 0x44e05000-0x44e05fff,0x44e31000-0x44e31fff,0x48040000-0x48040fff,0x48042000-0x48042fff,0x48044000-0x48044fff,0x48046000-0x48046fff,0x48048000-0x48048fff,0x4804a000-0x4804afff irq 66,67,68,69,92,93,94,95 on simplebus0
Timecounter "AM335x Timecounter" frequency 24000000 Hz quality 1000
Event timer "AM335x Eventtimer" frequency 24000000 Hz quality 1000
am335x_rtc0: <AM335x RTC (power management mode)> mem 0x44e3e000-0x44e3efff irq 75,76 on simplebus0
am335x_rtc0: AM335X RTC v1.0.6
ti_adc0: <TI ADC controller> mem 0x44e0d000-0x44e0efff irq 16 on simplebus0
ti_adc0: scheme: 0x1 func: 0x730 rtl: 0 rev: 0.1 custom rev: 0
ti_wdt0: <TI Watchdog Timer> mem 0x44e35000-0x44e35fff irq 91 on simplebus0
gpio0: <Ti AM335x General Purpose I/O (GPIO)> mem 0x44e07000-0x44e07fff,0x4804c000-0x4804cfff,0x481ac000-0x481acfff,0x481ae000-0x481aefff irq 96,97,98,99,32,33,62,63 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin(s) 53 on gpiobus0
gpioled1: <GPIO led> at pin(s) 54 on gpiobus0
gpioled2: <GPIO led> at pin(s) 55 on gpiobus0
gpioled3: <GPIO led> at pin(s) 56 on gpiobus0
gpioc0: <GPIO controller> on gpio0
uart0: <TI UART (16550 compatible)> mem 0x44e09000-0x44e09fff irq 72 on simplebus0
uart0: console (115384,n,8,1)
ti_edma30: <TI EDMA Controller> mem 0x49000000-0x490fffff,0x49800000-0x498fffff,0x49900000-0x499fffff,0x49a00000-0x49afffff irq 12,13,14 on simplebus0
ti_edma30: EDMA revision 40014c00
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 64 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
sdhci_ti1: <TI MMCHS (SDHCI 2.0)> mem 0x481d8000-0x481d8fff irq 28 on simplebus0
mmc1: <MMC/SD bus> on sdhci_ti1
cpsw0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a103fff irq 40,41,42,43 on simplebus0
cpsw0: CPSW SS Version 1.12 (0)
cpsw0: Initial queue size TX=128 RX=384
miibus0: <MII bus> on cpsw0
smscphy0: <SMC LAN8710A 10/100 interface> PHY 0 on miibus0
smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cpsw0: Ethernet address: xx:xx:xx:xx:xx:xx
iichb0: <TI I2C Controller> mem 0x44e0b000-0x44e0bfff irq 70 on simplebus0
iichb0: I2C revision 4.0 FIFO size: 32 bytes
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
am335x_pmic0: <TI TPS65217 Power Management IC> at addr 0x48 on iicbus0
iichb1: <TI I2C Controller> mem 0x4802a000-0x4802afff irq 71 on simplebus0
iichb1: I2C revision 4.0 FIFO size: 32 bytes
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iichb2: <TI I2C Controller> mem 0x4819c000-0x4819cfff irq 30 on simplebus0
iichb2: I2C revision 4.0 FIFO size: 32 bytes
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
am335x_pwm0: <AM335x PWM> mem 0x48300000-0x483000ff,0x48300100-0x4830017f,0x48300180-0x483001ff,0x48300200-0x4830025f irq 86,58 on simplebus0
am335x_pwm1: <AM335x PWM> mem 0x48302000-0x483020ff,0x48302100-0x4830217f,0x48302180-0x483021ff,0x48302200-0x4830225f irq 87,59 on simplebus0
am335x_pwm2: <AM335x PWM> mem 0x48304000-0x483040ff,0x48304100-0x4830417f,0x48304180-0x483041ff,0x48304200-0x4830425f irq 88,60 on simplebus0
musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff,0x47401000-0x474012ff,0x47401300-0x474013ff,0x47401400-0x474017ff,0x47401800-0x47401aff,0x47401b00-0x47401bff,0x47401c00-0x47401fff irq 17,18,19 on simplebus0
musbotg0: TI AM335X USBSS v0.0.13
usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus0 on musbotg0
usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus1 on musbotg0
ti_pruss0: <TI Programmable Realtime Unit Subsystem> mem 0x4a300000-0x4a37ffff irq 20,21,22,23,24,25,26,27 on simplebus0
ti_pruss0: AM33xx PRU-ICSS
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Mentor Graphics> at usbus1
uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Mentor Graphics> at usbus0
uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 4GB <SDHC 00000 1.0 SN 04C16EA3 MFG 09/2012 by 27 SM> at mmc0 48.0MHz/4bit/65535-block
uhub1: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
mmcsd1: 2GB <MMC MMC02G 3.10 SN 98E43448 MFG 05/1997 by 254 0x004e> at mmc1 48.0MHz/8bit/65535-block
am335x_pmic0: TPS65217C ver 1.2 powered by USB
random: unblocking device.
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
warning: no time-of-day clock registered, system time will not be set accurately
cpsw0: link state changed to UP