Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-06-20 21:14:29
From: Sevan / Venture37
Description: CheriBSD running on Beri (dmesg via Robert Watson)
Consoles: altera jtag uart
main(0, 0x90000000400004e0, 0x90000000400004e8, 0x980000000010a910 (0x3eeffc00))
FreeBSD/mips BERI loader, Revision 0.1
([_EMAIL_XXXXXXXXXXXXXXXX], Tue Apr 29 15:27:36 BST 2014)
-
/boot/kernel/kernel data=0x657e00+0x128ef0 syms=[0x8+0x7a418+0x8+0x6e33a]
Hit [Enter] to boot immediately, or 1 2 3 sequence for command prompt.
Booting [/boot/kernel/kernel]...
Kernel entry at 0xffffffff80100160
Kernel args: (null)
entry: platform_start()
Using FDT at 0xffffffff806c01c0 from kernel
cmd line:
envp:
bootinfo found at 0x980000000004da70
memsize = 0x3eeffc00
Cache info:
picache_stride = 4096
picache_loopcount = 4
pdcache_stride = 4096
pdcache_loopcount = 4
cpu0: Unknown cid 0 processor v0.4
MMU: Standard TLB, 144 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: direct-mapped with 128 sets, 128 bytes per line
L1 d-cache: direct-mapped with 128 sets, 128 bytes per line
Config1=0x9e703848<COP2,WatchRegs>
Config3=0x80002000
Physical memory chunk(s):
0x881000 - 0x3eefffff, 1046999040 bytes (255615 pages)
Maxmem is 0x3ef00000
pcpu is available at virtual address 0xc000000000000000.
KDB: debugger backends: ddb
KDB: current backend: ddb
platform_cpu_mask: hardware has 1 cores with 1 threads each
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #40 36225f5(master)-dirty: Sat Jun 20 14:11:57 UTC 2015
[_EMAIL_XXXXXXXXXXXXXX]:/home/rnw24/obj/mips.mips64/home/rnw24/git/cheribsd/sys/CHERI_DE4_USBROOT mips
gcc version 4.2.1 20070831 patched [FreeBSD]
VT: init without driver.
module_register: module atse/miibus already exists!
Module atse/miibus failed to register: 17
real memory = 1055916032 (1031168K bytes)
Physical memory chunk(s):
0x009a2000 - 0x3d564fff, 1018966016 bytes (248771 pages)
avail memory = 1013612544 (966MB)
CHERI: compiled for 256-bit capabilities
ULE: setup cpu 0
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
mem: <memory>
nfslock: pseudo-device
crypto: <crypto core>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
nexus0: <MIPS32 root nexus>
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus (BERI version)> on ofwbus0
beripic0: <BERI Programmable Interrupt Controller> mem 0x7f804000-0x7f8043ff,0x7f806000-0x7f80600f,0x7f806080-0x7f80608f,0x7f806100-0x7f80610f irq 0,1,2,3,4 on simplebus0
beripic0: config region at mem 0x7f804000-0x7f804400
beripic0: IP read region at mem 0x7f806000-0x7f806010
beripic0: IP set region at mem 0x7f806080-0x7f806090
beripic0: IP clear region at mem 0x7f806100-0x7f806110
simplebus0: no default resources for rid = 5, type = 1
beripic0: 64 hard and 64 soft sources
beripic0: initial config: src 0: enabled tid: 0 hardintr 1
beripic0: initial config: src 1: enabled tid: 0 hardintr 2
beripic0: initial config: src 2: enabled tid: 0 hardintr 3
beripic0: initial config: src 5: enabled tid: 0 hardintr 1
beripic0: initial config: src 6: enabled tid: 0 hardintr 0
beripic0: initial config: src 11: enabled tid: 0 hardintr 4
beripic0: initial config: src 12: enabled tid: 0 hardintr 0
uart0: <16550 or compatible> mem 0x7f002100-0x7f00211f irq 6 (beripic0) on simplebus0
beripic0: mapping pin 6 to irq 0, tid 0
uart0: fast interrupt
altera_jtag_uart0: <Altera JTAG UART> mem 0x7f000000-0x7f00003f irq 0 (beripic0) on simplebus0
beripic0: mapping pin 0 to irq 1, tid 0
altera_jtag_uart1: <Altera JTAG UART> mem 0x7f001000-0x7f00103f on simplebus0
simplebus0: no default resources for rid = 0, type = 1
altera_jtag_uart1: IRQ unavailable; selecting polled operation
altera_jtag_uart2: <Altera JTAG UART> mem 0x7f002000-0x7f00203f on simplebus0
simplebus0: no default resources for rid = 0, type = 1
altera_jtag_uart2: IRQ unavailable; selecting polled operation
altera_sdcardc0: <Altera Secure Data Card IP Core> mem 0x7f008000-0x7f0083ff on simplebus0
altera_sdcardc0: 2021M SD Card inserted
terasic_de4led0: <Terasic DE4 8-element LED> mem 0x7f006000 on simplebus0
cfi0: <Intel/Sharp - 64MB> mem 0x74000000-0x77ffffff on simplebus0
cfi0: [4x32KB,511x128KB]
cfid0 on cfi0
atse0: <Altera Triple-Speed Ethernet MegaCore> mem 0x7f007000-0x7f0073ff,0x7f007500-0x7f007507,0x7f007520-0x7f00753f,0x7f007400-0x7f007407,0x7f007420-0x7f00743f irq 1,2 (beripic0) on simplebus0
atse0: MAC ctrl region at mem 0x7f007000-0x7f007400
atse0: RX FIFO at mem 0x7f007500-0x7f007508
atse0: RXC FIFO at mem 0x7f007520-0x7f007540
atse0: TX FIFO at mem 0x7f007400-0x7f007408
atse0: TXC FIFO at mem 0x7f007420-0x7f007440
miibus0: <MII bus> on atse0
e1000phy4: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
e1000phy4: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
atse0: bpf attached
atse0: Ethernet address: [_MAC_XXXXXXXXXX]
beripic0: mapping pin 1 to irq 2, tid 0
beripic0: mapping pin 2 to irq 3, tid 0
atse1: <Altera Triple-Speed Ethernet MegaCore> mem 0x7f005000-0x7f0053ff,0x7f005500-0x7f005507,0x7f005520-0x7f00553f,0x7f005400-0x7f005407,0x7f005420-0x7f00543f irq 11,12 (beripic0) on simplebus0
atse1: MAC ctrl region at mem 0x7f005000-0x7f005400
atse1: RX FIFO at mem 0x7f005500-0x7f005508
atse1: RXC FIFO at mem 0x7f005520-0x7f005540
atse1: TX FIFO at mem 0x7f005400-0x7f005408
atse1: TXC FIFO at mem 0x7f005420-0x7f005440
atse1: Ethernet address not meeting our multi-MAC standards. Falling back to random hadware address.
miibus1: <MII bus> on atse1
e1000phy5: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1
e1000phy5: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
atse1: bpf attached
atse1: Ethernet address: [_MAC_XXXXXXXXXX]
beripic0: mapping pin 11 to irq 4, tid 0
beripic0: mapping pin 12 to irq 0, tid 0
terasic_mtl0: <Terasic Multi-touch LCD (MTL)> mem 0x70400000-0x70400fff,0x70000000-0x70176fff,0x70177000-0x70178fff on simplebus0
terasic_mtl0: registers at mem 0x70400000-0x70401000
terasic_mtl0: pixel frame buffer at mem 0x70000000-0x70177000
terasic_mtl0: text frame buffer at mem 0x70177000-0x70179000
terasic_mtl0: rejecting invalid panel params width=800 height=480
terasic_mtl0: using default panel params
fbd0 on terasic_mtl0
VT: initialize with new VT driver "fb".
saf1761otg0: <ISP1761/SAF1761 DCI USB 2.0 Device Controller> mem 0x7f100000-0x7f13ffff,0x7f140000-0x7f140003 irq 4,5 (beripic0) on simplebus0
beripic0: mapping pin 5 to irq 1, tid 0
usbus0 on saf1761otg0
saf1761otg0: usbpf: Attached
altera_avgen0: <Generic Altera Avalon device attachment> mem 0x7f009000-0x7f009001 on simplebus0
berirom0: <BERI build information ROM> mem 0x7f00a000-0x7f00afff on simplebus0
berirom0: Built on 2015-06-10 at 13:36:14 (1433943374)
berirom0: SVN revision: r18953
altera_avgen1: <Generic Altera Avalon device attachment> mem 0x7f00c000-0x7f00c007 on simplebus0
altera_avgen2: <Generic Altera Avalon device attachment> mem 0x7f00b080 on simplebus0
altera_avgen3: <Generic Altera Avalon device attachment> mem 0x7f00b000-0x7f00b007 on simplebus0
altpll0: <Altera reconfigurable PLL> mem 0x7f00e000-0x7f00efff on simplebus0
altpll0: registers at mem 0x7f00e000-0x7f00f000
pixelstream0: <Pixelstream HDMI> mem 0x7f00d000-0x7f00d027 on simplebus0
pixelstream0: registers at mem 0x7f00d000-0x7f00d028
pixelstream0: pixelstream vt(4) not selected by kern.vt.driver tunable
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 100000000 Hz quality 800
Event timer "MIPS32" frequency 100000000 Hz quality 800
cryptosoft0: <software crypto> on nexus0
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
Device configuration finished.
Timecounters tick every 5.000 msec
crypto: <crypto device>
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
GEOM: new disk altera_sdcard0
GEOM: new disk cfid0
usbus0: 480Mbps High Speed USB v2.0
MAP: No valid partition found at altera_sdcard0
ugen0.1: <NXP> at usbus0
uhub0: <NXP DCI Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
random: unblocking device.
uhub0: 2 ports with 2 removable, self powered
cfid0: slice 00000000-0001ffff: config (127KB)
cfid0: slice 00020000-00c1ffff: fpga0 (12287KB)
cfid0: slice 00c20000-0181ffff: fpga1 (12287KB)
cfid0: slice 01820000-03fdffff: os (40703KB)
cfid0: slice 03fe0000-03ffffff: boot (127KB)
MAP: No valid partition found at cfid0
MAP: No valid partition found at cfid0s.config
MAP: cfid0s.fpga0: 0xc00000, data=0xc00000 "/dev/map/fpga"
MAP: No valid partition found at cfid0s.fpga1
MAP: cfid0s.os: 7e0000x1800000, data=0x1800000 "/dev/map/kernel"
ugen0.2: <Philips Semiconductors> at usbus0
uhub1: <Philips Semiconductors ISP1520, class 9/0, rev 2.00/0.00, addr 2> on usbus0
MAP: No valid partition found at cfid0s.boot
Root mount waiting for: usbus0
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.3: <Kingston> at usbus0
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:0:0: Attached to scbus0
Trying to mount root from ufs:/dev/da0 []...
mountroot: waiting for device /dev/da0 ...
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
pass0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SPC-2 SCSI device
pass0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
pass0: 40.000MB/s transfers
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SPC-2 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 59006MB (120845300 512 byte sectors: 255H 63S/T 7522C)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
da0: Delete methods: <NONE(*)>
GEOM: new disk da0
MAP: No valid partition found at da0
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Setting hostuuid: edc4300a-f6e6-11e3-92f6-c5285a7fac82.
Setting hostid: 0xb5ab46a9.
No suitable dump device was found.
Starting file system checks:
/dev/da0: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0: clean, 59315721 free (553 frags, 7414396 blocks, 0.0% fragmentation)
MAP: No valid partition found at da0
/dev/altera_sdcard0: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/altera_sdcard0: clean, 1365922 free (266 frags, 170707 blocks, 0.0% fragmentation)
MAP: No valid partition found at altera_sdcard0
Mounting local file systems:.
Writing entropy file:.
Setting hostname: beri1.
atse0: link state changed to DOWN
atse0: link state changed to UP
atse1: link state changed to DOWN
Starting Network: lo0 atse0 atse1.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet[_IP_XXXX] netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
atse0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80048<VLAN_MTU,POLLING,LINKSTATE>
ether [_MAC_XXXXXXXXXX]
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
atse1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80048<VLAN_MTU,POLLING,LINKSTATE>
ether [_MAC_XXXXXXXXXX]
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
Starting devd.
Starting dhclient.
DHCPREQUEST on atse0 to[_IP_XXXXXXXXXX] port 67
ip length 339 disagrees with bytes received 341.
accepting packet with data after udp payload.
DHCPACK from[_IP_XXXXXXX]
bound to[_IP_XXXXXXXX] -- renewal in 18000 seconds.
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
MAP: No valid partition found at md0
MAP: No valid partition found at md0
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Configuring syscons: blanktime.
Performing sanity check on sshd configuration.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting sshd.
Could not load host key: /etc/ssh/ssh_host_dsa_key
Starting cron.
Starting de4_hdmi.
Starting background file system checks in 60 seconds.
atse0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80048<VLAN_MTU,POLLING,LINKSTATE>
ether [_MAC_XXXXXXXXXX]
inet[_IP_XXXXXXXX] netmask 0xffffff00 broadcast[_IP_XXXXXXXXX]
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
Wed Dec 31 03:29:01 UTC 2014
FreeBSD/mips (beri1) (ttyj0)
login: