Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2015-07-04 16:20:12
From: ozaki-r
Description: NetBSD/amd64 7.0_RC1 on VirtualBox 4.3.26
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC1 (GENERIC.201506190427Z)
total memory = 2047 MB
avail memory = 1970 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
innotek GmbH VirtualBox (1.2)
mainbus0 (root)
ACPI: RSDP 0xe0000 000024 (v02 VBOX  )
ACPI: XSDT 0x7fff0040 00004C (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
ACPI: FACP 0x7fff0110 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
ACPI: DSDT 0x7fff0540 001BF1 (v01 VBOX   VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x7fff0240 000040
ACPI: APIC 0x7fff0280 00006C (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
ACPI: HPET 0x7fff02f0 000038 (v01 VBOX   VBOXHPET 00000001 ASL  00000061)
ACPI: MCFG 0x7fff0330 00003C (v01 VBOX   VBOXMCFG 00000001 ASL  00000061)
ACPI: SSDT 0x7fff0370 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz, id 0x40651
cpu1 at mainbus0 apid 1: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz, id 0x40651
cpu2 at mainbus0 apid 2: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz, id 0x40651
cpu3 at mainbus0 apid 3: Intel(R) Core(TM) i7-4650U CPU @ 1.70GHz, id 0x40651
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <VBOX  ,VBOXXSDT,00000001>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
LPT (PNP0400) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (VGA, 0x0100): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: innotek VBOX rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
ACPI: Enabled 2 GPEs in block 00 to 07
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vga0 at pci0 dev 2 function 0: vendor 0x80ee product 0xbeef (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at ioapic0 pin 19
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: MDIC read timed out: phy 0 reg 1
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x80ee product 0xcafe (miscellaneous system) at pci0 dev 4 function 0 not configured
piixpm0 at pci0 dev 7 function 0: vendor 0x8086 product 0x7113 (rev. 0x08)
piixpm0: SMBus disabled
virtio0 at pci0 dev 8 function 0
virtio0: Virtio Network Device (rev. 0x00)
vioif0 at virtio0: Ethernet address [_MAC_XXXXXXXXXX]
virtio0: allocated 12288 byte for virtqueue 0 for rx, size 256
virtio0: allocated 12288 byte for virtqueue 1 for tx, size 256
virtio0: allocated 8192 byte for virtqueue 2 for control, size 16
virtio0: interrupting at ioapic0 pin 16
ppb0 at pci0 dev 24 function 0: vendor 0x8086 product 0x2448 (rev. 0xf2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci0 dev 25 function 0: vendor 0x8086 product 0x2448 (rev. 0xf2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ohci0 at pci0 dev 31 function 4: vendor 0x106b product 0x003f (rev. 0x00)
ohci0: interrupting at ioapic0 pin 23
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 31 function 5: vendor 0x8086 product 0x265c (rev. 0x00)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: wrong number of companions (0 != 1)
usb1 at ehci0: USB revision 2.0
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter offline.
wd0 at atabus0 drive 0
wd0: <VBOX HARDDISK>
wd0: drive supports 128-sector PIO transfers, LBA addressing
wd0: 16383 MB, 33288 cyl, 16 head, 63 sec, 512 bytes/sect x 33554416 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1
wd1: <VBOX HARDDISK>
wd1: drive supports 128-sector PIO transfers, LBA addressing
wd1: 32767 MB, 66576 cyl, 16 head, 63 sec, 512 bytes/sect x 67108832 sectors
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <VBOX CD-ROM, VB2-01700376, 1.0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 2 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)