Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2015-07-06 04:22:21
From: jmz
Description: Acer C720 on DragonflyBSD 4.2.1
Copyright (c) 2003-2015 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly v4.2.1-RELEASE #3: Wed Jul 1 16:30:58 PDT 2015 [_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/usr/obj/build/home/justin/src/sys/X86_64_GENERIC TSC invariant clock: 1396750560 Hz, i8254 clock: 1193168 Hz CPU: Intel(R) Celeron(R) 2957U @ 1.40GHz (1396.77-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x40651 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x45daebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,RDRND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x2603<GSFSBASE,TSCADJ,ENHMOVSB,INVPCID> Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM> MONITOR/MWAIT Features=0x3<CST,INTBRK> real memory = 2084948992 (1988 MB) avail memory = 1826013184 (1741 MB) lapic: divisor index 0, frequency 49884738 Hz Initialize MI interrupts TSC testing MP synchronization ... TSC is MP synchronized TSC: cputimer freq 87298362, shift 4 FQ scheduler policy version 1.1 loaded wdog: In-kernel automatic watchdog reset enabled kbd1 at kbdmux0 disk scheduler: set policy of vn0 to noop disk scheduler: set policy of vn1 to noop disk scheduler: set policy of vn2 to noop disk scheduler: set policy of vn3 to noop disk scheduler: set policy of md0 to noop md0: Malloc disk ACPI: RSDP 0x00000000000F6980 000024 (v02 CORE ) ACPI: XSDT 0x000000007BFD90E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: FACP 0x000000007BFDD850 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001) ACPI: DSDT 0x000000007BFD9250 0045FF (v02 COREv4 COREBOOT 20110725 INTL 20140114) ACPI: FACS 0x000000007BFD9210 000040 ACPI: HPET 0x000000007BFDD950 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: APIC 0x000000007BFDD990 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: MCFG 0x000000007BFDD9F0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: SSDT 0x000000007BFDEA30 0008A0 (v02 CORE COREBOOT 0000002A CORE 0000002A) ACPI: SSDT 0x000000007BFDF2D0 00005C (v02 CORE COREBOOT 0000002A CORE 0000002A) cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. padlock0: No ACE support. rdrand0: <RdRand RNG> on motherboard acpi0: <CORE COREBOOT> on motherboard ACPI: All ACPI Tables successfully acquired ACPI FADT: SCI testing interrupt mode ... ACPI FADT: SCI select level/high objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both unknown: I/O range not supported acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: frequency 14318180 acpi_ec0: <Embedded Controller: GPE 0x24> port 0x66,0x62 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> irq 37 on acpi0 acpi_button2: <Sleep Button> irq 38 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x183f mem 0xd0000000-0xdfffffff,0xe0000000-0xe03fffff at device 2.0 on pci0 agp0: <Haswell> on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory vgapci0: Boot video device pci0: <multimedia, HDA> (vendor 0x8086, dev 0x0a0c) at device 3.0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xe0500000-0xe050ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <base peripheral, DMA controller> (vendor 0x8086, dev 0x9c60) at device 21.0 pci0: <serial bus> (vendor 0x8086, dev 0x9c61) at device 21.1 pci0: <serial bus> (vendor 0x8086, dev 0x9c62) at device 21.2 pci0: <multimedia, HDA> (vendor 0x8086, dev 0x9c20) at device 27.0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ath0: <Atheros AR946x/AR948x> mem 0xe0400000-0xe047ffff at device 0.0 on pci1 ar9300_attach: calling ar9300_hw_attach ar9300_hw_attach: calling ar9300_eeprom_attach ar9300_flash_map: unimplemented for now Restoring Cal data from DRAM Restoring Cal data from EEPROM Restoring Cal data from Flash Restoring Cal data from Flash Restoring Cal data from OTP ar9300_hw_attach: ar9300_eeprom_attach returned 0 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams usbus0: 5.0Gbps Super Speed USB v3.0 ath0: AR9460 mac 640.2 RF5110 phy 1086.13 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xe051f800-0xe051fbff at device 29.0 on pci0 usbus1: EHCI version 1.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 usbus1: <Intel Lynx Point LP USB 2.0 controller USB> on ehci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <AHCI-PCI-SATA> port 0x1840-0x185f,0x1874-0x1877,0x1868-0x186f,0x1870-0x1873,0x1860-0x1867 mem 0xe051f000-0xe051f7ff irq 22 at device 31.2 on pci0 usbus1: 480Mbps High Speed USB v2.0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 13 ports with 13 removable, self powered ahci0: AE did not auto-clear! uhub1: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x8087> at usbus1 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 uhub2: 8 ports with 8 removable, self powered ugen0.2: <vendor 0x0930> at usbus0 umass0: <vendor 0x0930 USB Flash Memory, class 0/0, rev 2.00/1.00, addr 1> on usbus0 ahci0: Intel hocus pocus ahci0: AHCI 1.3 cap 0xdf34ff01<S64A,NCQ,SMPS,SSS,SALP,SAL,SCLO,SAM,PMD,SSC,PSC> cap2 0x3c<BOH>, 2 ports, 32 tags/port, gen 3 (6Gbps) ahci0.0: Caps 4<POD> ugen0.3: <SunplusIT Inc> at usbus0 ahci0.0: Found SSD "KINGSTON SNS4151S316GD S9FM01.6" serial="50026B724809F8A7" ahci0.0: tags=32/32 satacap=670e satacap2=0086 satafea=014c NCQ=YES capacity=15272.08MB ahci0.0: f85=3469 f86=bc01 f87=6063 WC=enabled RA=enabled SEC=freezing pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x9c22) at device 31.3 pci0: <dasp> (vendor 0x8086, dev 0x9c24) at device 31.6 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16450 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 cpu0: <ACPI CPU> on acpi0 cpu_cst0: <ACPI CPU C-State> on cpu0 cpu_pst0: <ACPI CPU P-State> on cpu0 clockmod0: <CPU clock modulation> on cpu0 perfbias0: <CPU perf-energy bias> on cpu0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 cpu1: <ACPI CPU> on acpi0 cpu_cst1: <ACPI CPU C-State> on cpu1 cpu_pst1: <ACPI CPU P-State> on cpu1 clockmod1: <CPU clock modulation> on cpu1 perfbias1: <CPU perf-energy bias> on cpu1 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 orm0: <Option ROM> at iomem 0xee800-0xeffff on isa0 pmtimer0 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio2: can't drain, serial port might not exist, disabling hpt27xx: no controller detected. CAM: Configuring 2 busses CAM: finished configuring all busses disk scheduler: set policy of da8 to noop disk scheduler: set policy of da0 to noop da0 at ahci0 bus 0 target 0 lun 0 da0: <SATA KINGSTON SNS4151 S9FM> Fixed Direct Access SCSI-4 device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da0: 600.000MB/s transfers da0: 15272MB (31277232 512 byte sectors: 255H 63S/T 1946C) da0: supports TRIM da8 at umass-sim0 bus 0 target 0 lun 0 da8: < USB Flash Memory 1.00> Removable Direct Access SCSI-2 device da8: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX] da8: 40.000MB/s transfers da8: 1910MB (3913664 512 byte sectors: 255H 63S/T 243C) no B_DEVMAGIC (bootdev=0) Device Mapper version 4.16.0 loaded dm_target_error: Successfully initialized dm_target_zero: Successfully initialized Mounting root from ufs:da8s1a DMA space used: 7000k, remaining available: 124760k Mounting devfs ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called