Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2015-07-21 18:20:58
From: ajcc
Description: NetBSD/macppc 6.1.5 on eMac 1GHz ATi
NetBSD 6.1.5 (GENERIC) total memory = 1024 MB oea_startup: failed to allocate DEAD ZONE: error=12 avail memory = 982 MB timecounter: Timecounters tick every 10.000 msec found openpic PIC at 80040000 OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources. bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:0/netbsd-615 mainbus0 (root) cpu0 at mainbus0: 7455 (Revision 3.3), ID 0 (primary) cpu0: HID0 0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1 cpu0: 1000.00 MHz, 256KB L2 cache no parity parity enabled memory0 at mainbus0: len=384 spdmem0 at memory0 spdmem0: SDRAM, no parity or ECC, 512MB, 133MHz (PC-133) spdmem0: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45 spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) spdmem1 at memory0 spdmem1: SDRAM, no parity or ECC, 512MB, 143MHz (PC-133) spdmem1: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.0ns cycle time spdmem1: tAA-tRCD-tRP-tRAS: 3-15-15-37 spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) uni_n0 at mainbus0 address 0xf8000000 hw-clock at uni_n0 not configured ki2c0 at uni_n0 address 0xf8001000 iic1 at ki2c0: I2C bus cereal at ki2c0 address 0x1c0 not configured uninorth0 at mainbus0 pci0 at uninorth0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 11 function 0 pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00) genfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 7500 QW (rev. 0x00) genfb0: framebuffer at 0x9c008000, size 1024x768, depth 8, stride 1024 wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsemul_vt100_output_c0c1: ESC in kernel output ignored wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at genfb0 not configured uninorth1 at mainbus0 pci1 at uninorth1 bus 0 pci1: i/o space, memory space enabled pchb1 at pci1 dev 11 function 0 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) obio0 at pci1 dev 23 function 0: addr 0x80000000 obio0: enabling KeyLargo internal modem zsc0 at obio0 irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 snapper0 at obio0 offset 0x10000: irq 30,1,2 pmu0 at obio0 offset 0x16000 irq 47: rev. 12 pmu0: initializing IIC bus pmu0: initializing RTC pmu0: power-mgt not configured ki2c1 at obio0 iic2 at ki2c1: I2C bus cereal at ki2c1 address 0x1c0 not configured deq0 at ki2c1 Apple Digital Equalizer, addr 0x6a wdc0 at obio0 offset 0x1f000 irq 19, level triggered: DMA transfer atabus0 at wdc0 channel 0 wdc1 at obio0 offset 0x20000 irq 20, level triggered: DMA transfer atabus1 at wdc1 channel 0 snapper0: codec: TAS3004 audio0 at snapper0: full duplex, playback, capture ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00) ohci0: interrupting at irq 27 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00) ohci1: interrupting at irq 28 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 uninorth2 at mainbus0 pci2 at uninorth2 bus 0 pci2: i/o space, memory space enabled pchb2 at pci2 dev 11 function 0 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) fwohci0 at pci2 dev 14 function 0: Lucent Technologies FW322/323 IEEE 1394 Host Controller (rev. 0x00) fwohci0: interrupting at irq 40 fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 [_MAC_XXXXXXXXXX]:63:4e fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x01) gem0: interrupting at irq 41 bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: Ethernet address [_MAC_XXXXXXXXXX], 10KB RX fifo, 4KB TX fifo vmmask 67780000 schedmask 7ff80000 highmask 7ff80000 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 33290675 Hz quality 100 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) ieee1394if0: bus manager 0 uhub0 at usb0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at uhub0 port 1: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/3.95, addr 2 uhub2: 3 ports with 2 removable, bus powered wd0 at atabus0 drive 0 wd0: <ST340015A> wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: <_NEC DV-5800A, , 1.0A> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA) uhidev0 at uhub2 port 1 configuration 1 interface 0 uhidev0: Logitech Apple Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1 ums0 at uhidev0: 1 button wsmouse0 at ums0 mux 0 uhidev1 at uhub2 port 3 configuration 1 interface 0 uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/3.95, addr 4, iclass 3/1 ukbd0 at uhidev1 wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev2 at uhub2 port 3 configuration 1 interface 1 uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/3.95, addr 4, iclass 3/0 uhidev2: 3 report ids uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0 Kernelized RAIDframe activated swwdog0: software watchdog initialized boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs