Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-09-25 13:25:52
From: citrin
Description: Gigabyte 965GM-S2 motherboard
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-STABLE-20150615 #3: Fri Jun 26 16:47:41 MSK 2015
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/NK i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (2133.38-MHz 686-class CPU)
Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 3221225472 (3072 MB)
avail memory = 3121885184 (2977 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc0ac9290, 0) error 19
random: <Software, Yarrow> initialized
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xc400-0xc407 mem 0xf2000000-0xf20fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel G965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
drmn0: <Intel i965G> on vgapci0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xc1
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xc1
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xc1
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xc1
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xc1
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xc1
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xc1
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] initialized overlay support
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
vgapci0: Boot video device
pci0: <simple comms> at device 3.0 (no driver attached)
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xc800-0xc81f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xc000-0xc01f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf2306000-0xf23063ff irq 18 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xf2300000-0xf2303fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0x9000-0x90ff mem 0xf1000000-0xf1003fff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0
msk0: Using defaults for TSO: 65518/35/2048
msk0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci0: <JMicron JMB363 AHCI SATA controller> mem 0xf2100000-0xf2101fff irq 18 at device 0.0 on pci3
ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x1<NOFORCE>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
atapci0: <JMicron JMB363 UDMA133 controller> port 0xa000-0xa007,0xa400-0xa403,0xa800-0xa807,0xac00-0xac03,0xb000-0xb00f irq 19 at device 0.1 on pci3
ata2: <ATA channel> at channel 0 on atapci0
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf2305000-0xf23053ff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <serial bus, FireWire> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH8 AHCI SATA controller> port 0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe81f mem 0xf2307000-0xf23077ff irq 19 at device 31.2 on pci0
ahci1: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ahciem0: <AHCI enclosure management bridge> on ahci1
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xce000-0xd0fff pnpid ORM0000 on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC883 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC883 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC883 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC883 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC883 (Rear Digital)> at nid 30 and 31 on hdaa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen6.1: <Intel> at usbus6
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen5.1: <Intel> at usbus5
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel> at usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <Hitachi HDS721680PLA380 P21OAB3A> ATA-7 SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 78533MB (160836480 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad10
ada1 at ahcich6 bus 0 scbus5 target 0 lun 0
ada1: <WDC WD2500JS-00NCB1 10.02E02> ATA-7 SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 238474MB (488395055 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad14
pass0 at ata2 bus 0 scbus2 target 0 lun 0
pass0: <_NEC DVD_RW ND-3551A 2.02> Removable CD-ROM SCSI device
pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 2133379720 Hz quality 1000
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/ufs/root [rw]...
WARNING: / was not properly dismounted