Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2015-11-16 16:15:26
From: vlado
Description: HummingBoard-i2eX FreeBSD-11.0-CURRENT 20151102-r290273
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r290273: Tue Nov  3 02:54:03 UTC 2015
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/arm.armv6/usr/src/sys/IMX6 arm
FreeBSD clang version 3.7.0 (tags/RELEASE_370/final 246257) 20150906
CPU: Cortex A9-r2 rev 10 (Cortex-A core)
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
 WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:2 
Cache level 1: 
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 4-way instruction cache Read-Alloc
real memory  = 1073741824 (1024 MB)
avail memory = 1040461824 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 39,40,41 on simplebus1
simplebus3: <Flattened device tree simple bus> on simplebus1
simplebus4: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus4
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 37,38 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 3 on simplebus0
l2cache0: Part number: 0x3, release: 0x7
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on ofwbus0
gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 160
imx_gpt0: <Freescale i.MX GPT timer> mem 0x2098000-0x209bfff irq 19 on simplebus1
Event timer "iMXGPT" frequency 66000000 Hz quality 800
Timecounter "iMXGPT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 2 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 59 on simplebus2
uart0: console (115200,n,8,1)
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 20,21 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 22,23 on simplebus1
gpiobus1: <GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 24,25 on simplebus1
gpiobus2: <GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 26,27 on simplebus1
gpiobus3: <GPIO bus> on gpio3
gpioc3: <GPIO controller> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 28,29 on simplebus1
gpiobus4: <GPIO bus> on gpio4
gpioc4: <GPIO controller> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 30,31 on simplebus1
gpiobus5: <GPIO bus> on gpio5
gpioc5: <GPIO controller> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 32,33 on simplebus1
gpiobus6: <GPIO bus> on gpio6
gpioc6: <GPIO controller> on gpio6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 35 on simplebus1
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 42 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 43 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 70 on simplebus4
ehci0: [GIANT-LOCKED]
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 71 on simplebus4
ehci1: [GIANT-LOCKED]
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 74,75 on simplebus4
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: [_MAC_XXXXXXXXXX]
sdhci_imx0: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 80 on simplebus4
mmc0: <MMC/SD bus> on sdhci_imx0
iichb0: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 84 on simplebus4
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
cryptosoft0: <software crypto>
Timecounters tick every 2.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Freescale> at usbus1
ugen0.1: <Freescale> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 8GB <SDHC SL08G 8.0 SN 28E55BEB MFG 11/2014 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
Release APs
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
warning: no time-of-day clock registered, system time will not be set accurately
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
gic0: Spurious interrupt detected
ugen1.2: <vendor 0x04b4> at usbus1
uhub2: <vendor 0x04b4 USB2.0 Hub, class 9/0, rev 2.00/32.99, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
ugen1.3: <Ralink> at usbus1
random: unblocking device.
ffec0: link state changed to DOWN
rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 3> on usbus1
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528
ieee80211_load_module: load the wlan_amrr module by hand for now.
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
wlan0: link state changed to UP