Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2015-12-08 05:18:39
From: ajcc
Description: OpenBSD/sparc 5.8-current on SPARCstation IPX
OpenBSD 5.8-current (GENERIC) #6: Mon Nov 2 19:59:44 GMT 2015
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc/compile/GENERIC
real mem = 67006464 (63MB)
avail mem = 61698048 (58MB)
mainbus0 at root: SUNW,Sun 4/50
cpu0 at mainbus0: W8601/8701 or MB86903 @ 40 MHz, on-chip FPU; cache chip bug - trap page uncached
cpu0: 64K byte write-through, 32 bytes/line, hw flush cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000: delay constant 17, frequency 1000000 Hz
auxreg0 at mainbus0 ioaddr 0xf7400003
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zstty0 at zs0 channel 0: console
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
zskbd0 at zs1 channel 0: no keyboard
zsms0 at zs1 channel 1
wsmouse0 at zsms0 mux 0
audioamd0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
audio0 at audioamd0
sbus0 at mainbus0 ioaddr 0xf8000000: 20 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1+
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100A, 25MHz
scsibus0 at esp0: 8 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST15230N SUN4.2G, 0702> SCSI2 0/direct fixed serial.SEAGATE_ST15230N_SUN4.2G00201635
sd0: 4095MB, 512 bytes/sector, 8386733 sectors
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST15230N SUN4.2G, 0702> SCSI2 0/direct fixed serial.SEAGATE_ST15230N_SUN4.2G00208706
sd1: 4095MB, 512 bytes/sector, 8386733 sectors
sd2 at scsibus0 targ 2 lun 0: <SEAGATE, ST15230N SUN4.2G, 0702> SCSI2 0/direct fixed serial.SEAGATE_ST15230N_SUN4.2G00203835
sd2: 4095MB, 512 bytes/sector, 8386733 sectors
sd3 at scsibus0 targ 3 lun 0: <DEC, RZ29B (C) DEC, 0014> SCSI2 0/direct fixed serial.DEC_RZ29B_(C)_DEC00831905
sd3: 4091MB, 512 bytes/sector, 8380080 sectors
probe(esp0:4:0): max sync rate 8.33MB/s
sd4 at scsibus0 targ 4 lun 0: <COMPAQ, ST12550N, 3223> SCSI2 0/direct fixed serial.COMPAQ_ST12550N_00425332
sd4: 2006MB, 512 bytes/sector, 4110000 sectors
le0 at sbus0 slot 0 offset 0xc00000 pri 5: address [_MAC_XXXXXXXXXX]
le0: 16 receive buffers, 4 transmit buffers
cgsix0 at sbus0 slot 3 offset 0x0 pri 7: SUNW,501-1672, 1152x900, rev 5
wsdisplay0 at cgsix0 mux 1
wsdisplay0: screen 0 added (std, sun emulation)
fdc0 at mainbus0 ioaddr 0xf7200000 pri 11, softpri 4: chip 82072
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd5 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 5, 005> SCSI2 0/direct fixed
sd5: 12274MB, 512 bytes/sector, 25138560 sectors
bootpath: /sbus@1,f8000000/esp@0,800000/sd@4,0
root on sd4a (36de0a09c61143d3.a) swap on sd4b dump on sd4b