Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2016-02-25 20:28:10
From: ajcc
Description: FreeBSD/powerpc64 10.3-BETA2 on PowerMac G5
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-BETA2 #0 r295552: Fri Feb 12 04:45:55 UTC 2016
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/powerpc.powerpc64/usr/src/sys/GENERIC64 powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT(ofwfb): resolution 1280x1024
cpu0: IBM PowerPC 970FX revision 3.0, 900.31 MHz
cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
cpu0: HID0 511081<NAP,DPM,NHR,TBEN,ENATTN>
real memory = 1589964800 (1516 MB)
avail memory = 1473200128 (1404 MB)
random: <Software, Yarrow> initialized
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pcr0: <PPC 970 Power Control Register> on cpu0
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 94, bank1 generation 93
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 57
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0
iicbus0: <OFW I2C bus> on iichb0
iicbus0: <unknown card> at addr 0x380
htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff irq 224 on unin0
pcib0: <Apple U3 Host-AGP bridge> mem 0xf0000000-0xf1ffffff on ofwbus0
pci0: <OFW PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x98000000-0x9fffffff irq 187 at device 16.0 on pci0
vgapci0: Boot video device
agp0: <Apple U3 AGP Bridge> on hostb0
pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0
pcib1: 86 HT IRQs on device 1.0
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1
pci2: <OFW PCI bus> on pcib2
gem0: <Apple Shasta GMAC Ethernet> mem 0x80400000-0x805fffff irq 168 at device 15.0 on pci2
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1
pci3: <OFW PCI bus> on pcib3
macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci3
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 151,145,146,152,147,148 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 155 on macio0
iicbus1: <OFW I2C bus> on iichb1
iicbus1: <unknown card> at addr 0x380
iicbus1: <unknown card> at addr 0xd4
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 156,139,140,158,143,144 on macio0
ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 198 at device 11.0 on pci3
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 198 at device 11.1 on pci3
usbus1 on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80080000-0x800800ff irq 198 at device 11.2 on pci3
usbus2: EHCI version 1.0
usbus2 on ehci0
pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1
pci4: <OFW PCI bus> on pcib4
atapci0: <ServerWorks K2 SATA150 controller> mem 0x80102000-0x80103fff irq 138 at device 12.0 on pci4
pcib1: failed to reserve resource for pcib4
atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ata5: <ATA channel> at channel 3 on atapci0
ata0: <Shasta Kauai ATA Controller> mem 0x80104000-0x80107fff irq 166,165 at device 13.0 on pci4
fwohci0: <1394 Open Host Controller Interface> mem 0x80100000-0x80100fff irq 167 at device 14.0 on pci4
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:19:48
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: [_MAC_XXXXXXXXXX]
fwe0: Ethernet address: [_MAC_XXXXXXXXXX]
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
smu0: <Apple System Management Unit> on ofwbus0
iichb2: <SMU I2C controller> on smu0
iicbus2: <OFW I2C bus> on iichb2
ds17750: <Temp-Monitor DS1775> at addr 0x128 on iicbus2
ds16310: <Temp-Monitor DS1631> at addr 0x12c on iicbus2
iicbus2: <unknown card> at addr 0x1a8
iichb3: <SMU I2C controller> on smu0
iicbus3: <OFW I2C bus> on iichb3
Timecounter "timebase" frequency 33333333 Hz quality 0
Event timer "decrementer" frequency 33333333 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
fwohci0: too many cycles lost, no cycle master present?
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 3 ports with 3 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen0.2: <Mitsumi Electric> at usbus0
uhub3: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/3.95, addr 2> on usbus0
uhub3: 3 ports with 2 removable, bus powered
ada0 at ata0 bus 0 scbus4 target 0 lun 0cd0 at ata0 bus 0 scbus4 target 1 lun 0
cd0: <PIONEER DVD-RW DVR-117D B705> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXX]
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen0.3: <Mitsumi Electric> at usbus0
ada0: <ST320011A 3.19> ATA-5 deviceukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/3.95, addr 3> on usbus0
kbd1 at ukbd0
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/3.95, addr 3> on usbus0
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 19092MB (39102336 512 byte sectors)
ada0: Previously was known as ad0
Trying to mount root from ufs:/dev/ada0s3 [rw]...
ugen0.4: <vendor 0x05ac> at usbus0
ukbd1: <vendor 0x05ac product 0x1000, class 0/0, rev 1.10/12.41, addr 4> on usbus0
kbd2 at ukbd1
ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 1.10/12.41, addr 4> on usbus0
ums0: 5 buttons and [XY] coordinates ID=0
gem0: link state changed to DOWN
gem0: link state changed to UP