Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2016-04-03 18:32:57
From: gson
Description: NetBSD 7.0 on HP Compaq DC7900SFF
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0 (GENERIC) #0: Thu Mar 3 22:52:02 EET 2016
gson@redacted:/bracket/prod/7.0gson1/amd64/obj/sys/arch/amd64/compile/GENERIC
total memory = 3799 MB
avail memory = 3671 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq dc7900 Small Form Factor ( )
mainbus0 (root)
ACPI: RSDP 0xe5810 000014 (v00 COMPAQ)
ACPI: RSDT 0xdd7c5840 000044 (v01 HPQOEM SLIC-BPC 20090305 00000000)
ACPI: FACP 0xdd7c58e8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20131218/tbfadt-664)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20131218/tbfadt-716)
ACPI: DSDT 0xdd7c5e27 00A4B3 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0xdd7c5800 000040
ACPI: APIC 0xdd7c595c 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: ASF! 0xdd7c59e0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: MCFG 0xdd7c5a43 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: TCPA 0xdd7c5a7f 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: SLIC 0xdd7c5ab1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: HPET 0xdd7c5c27 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: DMAR 0xdd7c5c5f 0001C8 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
cpu1 at mainbus0 apid 2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
cpu2 at mainbus0 apid 1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
cpu3 at mainbus0 apid 3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20090305>, AslId < ,00000000>
ACPI: SSDT 0xdd7d161e 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: SSDT 0x0 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
COM1 (PNP0501) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
TPM (IFX0102) at acpi0 not configured
SBD1 (PNP0C02) at acpi0 not configured
SBD3 (PNP0C02) at acpi0 not configured
SBD2 (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
MBRD (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2e10 (rev. 0x03)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2e12 (rev. 0x03)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff8000438f3000, size 1280x1024, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x2e13 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
vendor 0x8086 product 0x2e14 (miscellaneous communications, revision 0x03) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2: vendor 0x8086 product 0x2e16 (rev. 0x03)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
vendor 0x8086 product 0x2e17 (serial communications, 16550-compat, revision 0x03) at pci0 dev 3 function 3 not configured
wm0 at pci0 dev 25 function 0: 82567LM-3 LAN Controller (rev. 0x02)
wm0: interrupting at ioapic0 pin 19
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3a67 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x3a68 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x3a69 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x3a6c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 21
hdafg0 at hdaudio0: ADI AD1884A
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: ADC01 2ch: Line In [Jack]
hdafg0: DAC02 2ch: HP Out [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a70 (rev. 0x02)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 32
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a78 (rev. 0x02)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 48
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a64 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a65 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a66 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a6a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa2)
pci3 at ppb2 bus 7
pci3: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a14 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2: Intel 82801JD Serial ATA Controller (ICH10) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus2 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus3 at piixide0 channel 1
piixide1 at pci0 dev 31 function 5: Intel 82801JD Serial ATA Controller (ICH10) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 18 for native-PCI interrupt
atabus4 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus5 at piixide1 channel 1
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 135000 mW, 2400 MHz
acpicpu0: P1: FFH, lat 10 us, pow 72165 mW, 1596 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub7: 2 ports with 2 removable, self powered
wd0 at atabus2 drive 0
wd0: <ST3160318AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev0: Belkin Components USB-PS2 Adapter, rev 1.10/1.20, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Belkin Components USB-PS2 Adapter, rev 1.10/1.20, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
atapibus0 at atabus3: 2 targets
cd0 at atapibus0 drive 0: <hp DVD-RAM GH40L, , RB0E> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs