Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2016-07-29 03:49:14
From: Jun Ebihara
Description: DoCoMo sigmarionII (NEC VR4131 rev0.2 180.633MHz)
pmap_steal_memory: seg 0: 0x4ee 0x4ee 0x1ffe 0x1ffe
pmap_steal_memory: seg 0: 0x52d 0x52d 0x1ffe 0x1ffe
pmap_steal_memory: seg 0: 0x52f 0x52f 0x1ffe 0x1ffe
total memory banks = 2
memory bank 0 = 00000000 5048KB(0x4ee000)
memory bank 1 = 0x4ee000 27720KB(0x1b12000)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.33 (GENERIC.201607080210Z)
DoCoMo sigmarionII (NEC VR4131 rev0.2 180.633MHz)
total memory = 32768 KB
avail memory = 26876 KB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc80) Rev. 8.0 with software emulated floating point
cpu0: 32 TLB entries, 256KB max page size
cpu0: 16KB/32B 2-way set-associative L1 instruction cache
cpu0: 16KB/16B 2-way set-associative write-back L1 data cache
vr4122ip0 at mainbus0
vrbcu0 at vr4122ip0 addr 0x0f000000-001f
vrbcu0: CPU 180.633MHz, bus 22.579MHz, ram 90.316MHz
vrcmu0 at vr4122ip0 addr 0x0f000060-007f
vrgiu0 at vr4122ip0 addr 0x0f000140-015f
hpcioman6 at vrgiu0
hpcin0 at hpcioman6 iochip vrgiu0, port 0, type 5, id 24576, interrupt level high
com0 at vrgiu0 addr b600000, half word aligned: ns16550a, working fifo
com1 at vr4122ip0 addr 0x0f000800-0807: ns16550a, working fifo
vrrtc0 at vr4122ip0 addr 0x0f000100-011f
vrpmu0 at vr4122ip0 addr 0x0f0000c0-00df
vrled0 at vr4122ip0 addr 0x0f000180-018f
vrpciu0 at vr4122ip0 addr 0x0f000c00-0dff
pci0 at vrpciu0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
vrc4173bcu0 at pci0 dev 12 function 0: vendor 1033 product 00a5 (rev. 0x00)
vrc4173bcu0: default clock mask is 1d23
vrc4173bcu0: interrupting at pciintr 0:12:0
vrkiu0 at vrc4173bcu0 addr 0x0100-011f
hpckbd0 at vrkiu0
wskbd0 at hpckbd0 mux 1
vrc4173piu0 at vrc4173bcu0 addr 0x00a0-00bf, 0x00c0-00df
wsmouse0 at vrc4173piu0 mux 0
vrc4173piu0: WARNING: powerhook_establish is deprecated
vendor 1033 product 00a6 (audio multimedia, revision 0x01) at pci0 dev 12 function 1 not configured
ohci0 at pci0 dev 12 function 2: vendor 1033 product 0035 (rev. 0x01)
ohci0: interrupting at pciintr 0:12:2
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
mqvideo0 at pci0 dev 13 function 0: MQ200 Rev.02 video controller, console
mqvideo0: framebuffer address: 0xb0800000
  PLL1: 53.452MHz(0x0e56242a, 12.288MHzx 87/ 20)
  PLL2: 30.021MHz(0x00d60a30, 12.288MHzx215/ 88)
  PLL3: disable
   MEM: 30.021MHz(PLL2)
    GE: 30.021MHz(PLL2)
   GC1: disable
   GC2: 21.380MHz(PLL1/2.5/1), FP
mqvideo0: WARNING: powerhook_establish is deprecated
hpcfb0 at mqvideo0: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
vrisab6 at vrgiu0: ISA port 0xb800000-0x18000000 mem 0xa000000-0x14000000
isa6 at vrisab6
pcic0 at isa6 port 0x3e0-0x3e1 iomem 0x10000-0x13fff irq 589827
pcic0: controller 0 (Cirrus PD6710/2X) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
wskbd1: connecting to wsdisplay0
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "vrrtc" frequency 32768 Hz quality 100
pcic0: using irq 589827 for socket events
pcic0: WARNING: powerhook_establish is deprecated
pcic0: WARNING: powerhook_establish is deprecated
uhub0 at usb0: vendor 1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wdc1 at pcmcia0 function 0: <TRANSCEND, TS8GCF133, >
pcic0: port 0xb800400-0xb80040f
wdc1: i/o mapped mode
pcmcia0: card irq 3
atabus0 at wdc1 channel 0
wd0 at atabus0 drive 0
wd0: <TRANSCEND>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 7647 MB, 15538 cyl, 16 head, 63 sec, 512 bytes/sect x 15662304 sectors
wd0: drive supports PIO mode 4
boot device: wd0
pcmcia0: card irq 3
root on wd0a dumps on wd0b
pcmcia0: card irq 3
pcmcia0: card irq 3
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/hpcmips/7.99.33/modules
WARNING: clock lost 5668 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
pid 1(init): ABI set to O32 (e_flags=0x1007)
/: replaying log to disk
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 1 added (std, vt100 emulation)
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 2 added (std, vt100 emulation)
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 3 added (std, vt100 emulation)
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 4 added (std, vt100 emulation)