Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-08-29 20:40:27
From: mark saad
Description: FreeBSD 10.3-RELEASE-p7 with 44 Cores of Broadwell
opyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p7 #0: Thu Aug 11 18:38:15 UTC 2016
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz (2194.96-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66560315392 (63476 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL INTEL ID>
FreeBSD/SMP: Multiprocessor System Detected: 44 CPUs
FreeBSD/SMP: 2 package(s) x 22 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
cpu4 (AP): APIC ID: 8
cpu5 (AP): APIC ID: 10
cpu6 (AP): APIC ID: 16
cpu7 (AP): APIC ID: 18
cpu8 (AP): APIC ID: 20
cpu9 (AP): APIC ID: 22
cpu10 (AP): APIC ID: 24
cpu11 (AP): APIC ID: 32
cpu12 (AP): APIC ID: 34
cpu13 (AP): APIC ID: 36
cpu14 (AP): APIC ID: 38
cpu15 (AP): APIC ID: 40
cpu16 (AP): APIC ID: 42
cpu17 (AP): APIC ID: 48
cpu18 (AP): APIC ID: 50
cpu19 (AP): APIC ID: 52
cpu20 (AP): APIC ID: 54
cpu21 (AP): APIC ID: 56
cpu22 (AP): APIC ID: 64
cpu23 (AP): APIC ID: 66
cpu24 (AP): APIC ID: 68
cpu25 (AP): APIC ID: 70
cpu26 (AP): APIC ID: 72
cpu27 (AP): APIC ID: 74
cpu28 (AP): APIC ID: 80
cpu29 (AP): APIC ID: 82
cpu30 (AP): APIC ID: 84
cpu31 (AP): APIC ID: 86
cpu32 (AP): APIC ID: 88
cpu33 (AP): APIC ID: 96
cpu34 (AP): APIC ID: 98
cpu35 (AP): APIC ID: 100
cpu36 (AP): APIC ID: 102
cpu37 (AP): APIC ID: 104
cpu38 (AP): APIC ID: 106
cpu39 (AP): APIC ID: 112
cpu40 (AP): APIC ID: 114
cpu41 (AP): APIC ID: 116
cpu42 (AP): APIC ID: 118
cpu43 (AP): APIC ID: 120
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL INTEL ID> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
cpu24: <ACPI CPU> on acpi0
cpu25: <ACPI CPU> on acpi0
cpu26: <ACPI CPU> on acpi0
cpu27: <ACPI CPU> on acpi0
cpu28: <ACPI CPU> on acpi0
cpu29: <ACPI CPU> on acpi0
cpu30: <ACPI CPU> on acpi0
cpu31: <ACPI CPU> on acpi0
cpu32: <ACPI CPU> on acpi0
cpu33: <ACPI CPU> on acpi0
cpu34: <ACPI CPU> on acpi0
cpu35: <ACPI CPU> on acpi0
cpu36: <ACPI CPU> on acpi0
cpu37: <ACPI CPU> on acpi0
cpu38: <ACPI CPU> on acpi0
cpu39: <ACPI CPU> on acpi0
cpu40: <ACPI CPU> on acpi0
cpu41: <ACPI CPU> on acpi0
cpu42: <ACPI CPU> on acpi0
cpu43: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib0
pci255: <unknown> at device 14.2 (no driver attached)
pci255: <unknown> at device 14.3 (no driver attached)
pci255: <unknown> at device 14.4 (no driver attached)
pci255: <unknown> at device 14.5 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci127: <ACPI PCI bus> on pcib1
pci127: <unknown> at device 14.2 (no driver attached)
pci127: <unknown> at device 14.3 (no driver attached)
pci127: <unknown> at device 14.4 (no driver attached)
pci127: <unknown> at device 14.5 (no driver attached)
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 47 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 47 at device 2.2 on pci0
pci3: <ACPI PCI bus> on pcib5
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> port 0x1020-0x103f mem 0x383fffc00000-0x383fffdfffff,0x383fffe04000-0x383fffe07fff irq 37 at device 0.0 on pci3
ix0: Using MSIX interrupts with 9 vectors
ix0: Invalid advertised speed; valid modes are 0x1 through 0x7
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> port 0x1000-0x101f mem 0x383fffa00000-0x383fffbfffff,0x383fffe00000-0x383fffe03fff irq 34 at device 0.1 on pci3
ix1: Using MSIX interrupts with 9 vectors
ix1: Invalid advertised speed; valid modes are 0x1 through 0x7
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.0 on pci0
pci5: <ACPI PCI bus> on pcib6
pci0: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x20a0-0x20a7,0x20bc-0x20bf,0x2098-0x209f,0x20b8-0x20bb,0x2040-0x205f mem 0x91d04000-0x91d047ff irq 16 at device 17.4 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x383ffff00000-0x383ffff0ffff irq 19 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x91d02000-0x91d023ff irq 18 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci7: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 on pci7
vgapci0: Boot video device
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x91d01000-0x91d013ff irq 18 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x2078-0x207f,0x20ac-0x20af,0x2070-0x2077,0x20a8-0x20ab,0x2020-0x203f mem 0x91d00000-0x91d007ff irq 16 at device 31.2 on pci0
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib9: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 71 at device 3.0 on pci128
pci129: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 71 at device 3.2 on pci128
pci130: <ACPI PCI bus> on pcib11
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> port 0x8020-0x803f mem 0x387fffe80000-0x387fffefffff,0x387ffff04000-0x387ffff07fff irq 66 at device 0.0 on pci130
ix2: Using MSIX interrupts with 9 vectors
ix2: Advertised speed can only be set on copper or multispeed fiber media types.
ix2: Ethernet address: [_MAC_XXXXXXXXXX]
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.1.13-k> port 0x8000-0x801f mem 0x387fffe00000-0x387fffe7ffff,0x387ffff00000-0x387ffff03fff irq 69 at device 0.1 on pci130
ix3: Using MSIX interrupts with 9 vectors
ix3: Advertised speed can only be set on copper or multispeed fiber media types.
ix3: Ethernet address: [_MAC_XXXXXXXXXX]
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
est16: <Enhanced SpeedStep Frequency Control> on cpu16
est17: <Enhanced SpeedStep Frequency Control> on cpu17
est18: <Enhanced SpeedStep Frequency Control> on cpu18
est19: <Enhanced SpeedStep Frequency Control> on cpu19
est20: <Enhanced SpeedStep Frequency Control> on cpu20
est21: <Enhanced SpeedStep Frequency Control> on cpu21
est22: <Enhanced SpeedStep Frequency Control> on cpu22
est23: <Enhanced SpeedStep Frequency Control> on cpu23
est24: <Enhanced SpeedStep Frequency Control> on cpu24
est25: <Enhanced SpeedStep Frequency Control> on cpu25
est26: <Enhanced SpeedStep Frequency Control> on cpu26
est27: <Enhanced SpeedStep Frequency Control> on cpu27
est28: <Enhanced SpeedStep Frequency Control> on cpu28
est29: <Enhanced SpeedStep Frequency Control> on cpu29
est30: <Enhanced SpeedStep Frequency Control> on cpu30
est31: <Enhanced SpeedStep Frequency Control> on cpu31
est32: <Enhanced SpeedStep Frequency Control> on cpu32
est33: <Enhanced SpeedStep Frequency Control> on cpu33
est34: <Enhanced SpeedStep Frequency Control> on cpu34
est35: <Enhanced SpeedStep Frequency Control> on cpu35
est36: <Enhanced SpeedStep Frequency Control> on cpu36
est37: <Enhanced SpeedStep Frequency Control> on cpu37
est38: <Enhanced SpeedStep Frequency Control> on cpu38
est39: <Enhanced SpeedStep Frequency Control> on cpu39
est40: <Enhanced SpeedStep Frequency Control> on cpu40
est41: <Enhanced SpeedStep Frequency Control> on cpu41
est42: <Enhanced SpeedStep Frequency Control> on cpu42
est43: <Enhanced SpeedStep Frequency Control> on cpu43
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich3 bus 0 scbus3 target 0 lun 0
ada0: cd0 at ahcich8 bus 0 scbus9 target 0 lun 0
cd0: <TEAC DV-W28S-A 9.2A> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytesuhub1: 2 ports with 2 removable, self powered
)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
<INTEL SSDSC2CT120A3 300i> ACS-2 ATA SATA 3.x device
uhub2: 2 ports with 2 removable, self powered
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
uhub0: 21 ports with 21 removable, self powered
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad10
ada1 at ahcich4 bus 0 scbus5 target 0 lun 0
ada1: <ST31000340NS SN06> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: Previously was known as ad12
ada2 at ahcich5 bus 0 scbus6 target 0 lun 0
ada2: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytesugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad14
ada3 at ahcich6 bus 0 scbus7 target 0 lun 0
ada3: ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2
<ST31000340NS SN06> ATA8-ACS SATA 2.x device
ada3: [_SERIAL_NUMBER_XXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors)
ada3: Previously was known as ad16
uhub3: 6 ports with 6 removable, self powered
ada4 at ahcich7 bus 0 scbus8 target 0 lun 0
ada4: <ST31000340NS SN06> ATA8-ACS SATA 2.x device
ada4: [_SERIAL_NUMBER_XXXXX]
ada4: 300.000MB/s transfers (ugen0.2: <American Megatrends Inc.> at usbus0
SATA 2.x, UDMA6, ukbd0: <Keyboard Interface> on usbus0
PIO 8192bytes)kbd2 at ukbd0
ada4: Command Queueing enabled
ada4: 953869MB (1953525168 512 byte sectors)
ada4: Previously was known as ad18
uhub4: 8 ports with 8 removable, self powered
lapic96: Forcing LINT1 to edge trigger
SMP: AP CPU #33 Launched!
lapic102: Forcing LINT1 to edge trigger
SMP: AP CPU #36 Launched!
lapic116: Forcing LINT1 to edge trigger
SMP: AP CPU #41 Launched!
lapic40: Forcing LINT1 to edge trigger
SMP: AP CPU #15 Launched!
lapic112: Forcing LINT1 to edge trigger
SMP: AP CPU #39 Launched!
lapic10: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic64: Forcing LINT1 to edge trigger
SMP: AP CPU #22 Launched!
lapic54: Forcing LINT1 to edge trigger
SMP: AP CPU #20 Launched!
lapic36: Forcing LINT1 to edge trigger
SMP: AP CPU #13 Launched!
lapic104: Forcing LINT1 to edge trigger
SMP: AP CPU #37 Launched!
lapic56: Forcing LINT1 to edge trigger
SMP: AP CPU #21 Launched!
lapic48: Forcing LINT1 to edge trigger
SMP: AP CPU #17 Launched!
lapic8: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic22: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
lapic88: Forcing LINT1 to edge trigger
SMP: AP CPU #32 Launched!
lapic52: Forcing LINT1 to edge trigger
SMP: AP CPU #19 Launched!
lapic38: Forcing LINT1 to edge trigger
SMP: AP CPU #14 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic106: Forcing LINT1 to edge trigger
SMP: AP CPU #38 Launched!
lapic24: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic50: Forcing LINT1 to edge trigger
SMP: AP CPU #18 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic16: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic34: Forcing LINT1 to edge trigger
SMP: AP CPU #12 Launched!
lapic86: Forcing LINT1 to edge trigger
SMP: AP CPU #31 Launched!
lapic84: Forcing LINT1 to edge trigger
SMP: AP CPU #30 Launched!
lapic32: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
lapic98: Forcing LINT1 to edge trigger
SMP: AP CPU #34 Launched!
lapic70: Forcing LINT1 to edge trigger
SMP: AP CPU #25 Launched!
lapic82: Forcing LINT1 to edge trigger
SMP: AP CPU #29 Launched!
lapic118: Forcing LINT1 to edge trigger
SMP: AP CPU #42 Launched!
lapic100: Forcing LINT1 to edge trigger
SMP: AP CPU #35 Launched!
lapic42: Forcing LINT1 to edge trigger
SMP: AP CPU #16 Launched!
lapic74: Forcing LINT1 to edge trigger
SMP: AP CPU #27 Launched!
lapic114: Forcing LINT1 to edge trigger
SMP: AP CPU #40 Launched!
lapic68: Forcing LINT1 to edge trigger
SMP: AP CPU #24 Launched!
lapic72: Forcing LINT1 to edge trigger
SMP: AP CPU #26 Launched!
lapic80: Forcing LINT1 to edge trigger
SMP: AP CPU #28 Launched!
lapic120: Forcing LINT1 to edge trigger
SMP: AP CPU #43 Launched!
lapic66: Forcing LINT1 to edge trigger
SMP: AP CPU #23 Launched!
Timecounter "TSC-low" frequency 1097482164 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/default []...
ix0: link state changed to UP
ums0: <Mouse Interface> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0