Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2016-09-13 19:46:10
From: demik
Description: FreeBSD 11.0-RC2 on PoweMac G5 1.8 GHz
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RC2 #0 r305679: Sat Sep 10 18:02:02 CEST 2016
    root@test160:/usr/obj/usr/src/sys/NOISE powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT(ofwfb): resolution 1680x1050
module zfsctrl already present!
cpu0: IBM PowerPC 970FX revision 3.0, 900.36 MHz
cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
cpu0: HID0 511081<NAP,DPM,NHR,TBEN,ENATTN>
real memory  = 1581330432 (1508 MB)
avail memory = 1473970176 (1405 MB)
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pcr0: <PPC 970 Power Control Register> on cpu0
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 352, bank1 generation 351
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 57
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0
iicbus0: <OFW I2C bus> on iichb0
iicbus0: <unknown card> at addr 0x1c0
htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff irq 224 on unin0
pcib0: <Apple U3 Host-AGP bridge> mem 0xf0000000-0xf1ffffff on ofwbus0
pci0: <OFW PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x98000000-0x9fffffff irq 187 at device 16.0 on pci0
vgapci0: Boot video device
agp0: <Apple U3 AGP Bridge> on hostb0
pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0
pcib1: 86 HT IRQs on device 1.0
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1
pci2: <OFW PCI bus> on pcib2
gem0: <Apple Shasta GMAC Ethernet> mem 0x80400000-0x805fffff irq 168 at device 15.0 on pci2
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1
pci3: <OFW PCI bus> on pcib3
macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci3
macio: device has more than 6 interrupts
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 151,145,146,152,147,148 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 155 on macio0
iicbus1: <OFW I2C bus> on iichb1
iicbus1: <unknown card> at addr 0x1c0
snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 156,139,140,158,143,144 on macio0
ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 198 at device 11.0 on pci3
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 198 at device 11.1 on pci3
usbus1 on ohci1
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 198 at device 11.2 on pci3
usbus2: EHCI version 1.0
usbus2 on ehci0
pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1
pci4: <OFW PCI bus> on pcib4
atapci0: <ServerWorks K2 SATA150 controller> mem 0x80102000-0x80103fff irq 138 at device 12.0 on pci4
pcib1: failed to reserve resource for pcib4
atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ata5: <ATA channel> at channel 3 on atapci0