Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-10-29 16:47:03
From: Ypnose
Description: HP EliteBook 840 G3 with DragonFly BSD 4.6.1
Copyright (c) 2003-2016 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v4.6.1-RELEASE #3: Sun Oct 16 21:13:25 EDT 2016
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/home/justin/release/4_6/sys/X86_64_GENERIC
i8254 clock: 1193164 Hz
TSC invariant clock: 2808048190 Hz
CPU: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz (2808.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x406e3 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x77fafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c6fbf<GSFSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID,RTM,RDSEED,ADX,SMAP>
Thermal and PM Features=0x27f7<SENSOR,TURBO,ARAT,PLN,ECMD,PTM>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 34233490432 (32647 MB)
avail memory = 32166232064 (30676 MB)
lapic: divisor index 0, frequency 12000113 Hz
SMI Frequency (worst case): 52631 Hz (19 us)
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 87751505, shift 5
VMM: VMX is disabled by the BIOS
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
ACPI: RSDP 0x00000000000FBE20 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000C7EFD0E8 0000C4 (v01 HPQOEM SLIC-BPC 00000000 01000013)
ACPI: FACP 0x00000000C7EF1000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: DSDT 0x00000000C7EC8000 025F16 (v02 HPQOEM 8079 00000000 INTL 20121018)
ACPI: FACS 0x00000000C7E6B000 000040
ACPI: SSDT 0x00000000C7EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018)
ACPI: TCPA 0x00000000C7EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C7EF9000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
ACPI: UEFI 0x00000000C7E7A000 000042 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C7EF3000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018)
ACPI: SSDT 0x00000000C7EF2000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018)
ACPI: HPET 0x00000000C7EF0000 000038 (v01 HPQOEM 8079 00000001 HP 00000001)
ACPI: APIC 0x00000000C7EEF000 0000BC (v01 HPQOEM 8079 00000001 HP 00000001)
ACPI: MCFG 0x00000000C7EEE000 00003C (v01 HPQOEM 8079 00000001 HP 00000001)
ACPI: SSDT 0x00000000C7EC7000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C7EC6000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C7EC5000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018)
ACPI: SSDT 0x00000000C7EC4000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018)
ACPI: SSDT 0x00000000C7EC2000 001B5C (v01 HP LAPTOPPC 00001000 INTL 20121018)
ACPI: NHLT 0x00000000C7EC1000 00002D (v00 INTEL EDK2 00000002 01000013)
ACPI: ASF! 0x00000000C7EC0000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
ACPI: FPDT 0x00000000C7EBF000 000044 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: BGRT 0x00000000C7EBE000 000038 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000C7EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018)
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
ACPI: Executed 17 blocks of module-level executable AML code
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 24000000
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x66,0x62 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xdfffffff,0xe0000000-0xe0ffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xe1220000-0xe122ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci0: <dasp> (vendor 0x8086, dev 0x9d31) at device 20.2 irq 18
pci0: <dasp> (vendor 0x8086, dev 0x9d60) at device 21.0
pci0: <simple comms> (vendor 0x8086, dev 0x9d3a) at device 22.0 irq 16
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms, UART> (vendor 0x8086, dev 0x9d3d) at device 22.3 irq 19
ahci0: <AHCI-PCI-SATA> port 0x3040-0x305f,0x3090-0x3093,0x3088-0x308f mem 0xe124e000-0xe124e7ff,0xe1250000-0xe12500ff,0xe1248000-0xe1249fff irq 16 at device 23.0 on pci0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ahci0: AE did not auto-clear!
uhub0: 18 ports with 18 removable, self powered
ugen0.2: <Generic> at usbus0
umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.0b, addr 1> on usbus0
ahci0: Intel hocus pocus
ahci0: AHCI 1.3.1 cap 0xcf34ff01<S64A,NCQ,SSS,SALP,SAL,SCLO,SAM,PMD,SSC,PSC> cap2 0x3c<DESO,SADM,SDS,APST>, 2 ports, 32 tags/port, gen 3 (6Gbps)
ahci0.0: Caps 4<POD>
ahci0.2: Caps 4<POD>
ahci0.0: Found DISK "WDC WD5000LPLX-60ZNTT1 02.01A02" serial="WD-WXA1A663T05C"
ahci0.0: tags=32/32 satacap=8d0e satacap2=0006 satafea=004c NCQ=YES capacity=476940.02MB
ahci0.0: f85=7069 f86=bc49 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.2: Found SSD "SanDisk SD8SN8U-512G-1006 X4120006" serial="163073422772"
ahci0.2: tags=32/32 satacap=850e satacap2=0086 satafea=01cc NCQ=YES capacity=488386.33MB
ahci0.2: f85=7069 f86=b409 f87=4123 WC=enabled RA=enabled SEC=frozen
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1: Disable PCI Express hot-plug interrupts(0x0008)
pci1: <ACPI PCI bus> on pcib1
pci1: <unknown> (vendor 0x10ec, dev 0x522a) at device 0.0 irq 17
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> (vendor 0x8086, dev 0x24f3) at device 0.0 irq 19
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> (vendor 0x8086, dev 0x9d21) at device 31.2
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x9d70) at device 31.3 irq 16
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x9d23) at device 31.4 irq 16
em0: <Intel(R) PRO/1000 Network Connection PCH_SPT_I219_LM 7.4.2> mem 0xe1200000-0xe121ffff irq 16 at device 31.6 on pci0
em0: MAC address: [_MAC_XXXXXXXXXX]
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE643D4AC40 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE648DFCE80 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20121018)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE648532C80 0005AA (v02 PmRef ApIst 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFFE0669F7F40 000119 (v02 PmRef ApCst 00003000 INTL 20121018)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 6 GPEs in block 00 to 7F
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 3 busses
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA WDC WD5000LPLX-6 02.0> Fixed Direct Access SCSI-4 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da1 at ahci0 bus 2 target 0 lun 0
da1: <SATA SanDisk SD8SN8U- X412> Fixed Direct Access SCSI-4 device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 600.000MB/s transfers
da1: 488386MB (1000215216 512 byte sectors: 255H 63S/T 62260C)
da1: supports TRIM
da8 at umass-sim0 bus 0 target 0 lun 0
da8: <Generic Flash Disk 8.07> Removable Direct Access SCSI-4 device
da8: [_SERIAL_NUMBER_XXXXX]
da8: 40.000MB/s transfers
da8: 3920MB (8028160 512 byte sectors: 255H 63S/T 499C)
ugen0.3: <Unknown> at usbus0 (disconnected)
ugen0.3: <DETNQ019I43R1K> at usbus0
no B_DEVMAGIC (bootdev=0)
Device Mapper version 4.16.0 loaded
dm_target_error: Successfully initialized
dm_target_zero: Successfully initialized
Mounting root from ufs:da8s1a
DMA space used: 5136k, remaining available: 131072k
Mounting devfs