NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2016-10-30 10:42:38
From: Ypnose
Description: IBM ThinkPad T42 with OpenBSD/i386 6.0

OpenBSD 6.0 (GENERIC) #1917: Tue Jul 26 12:48:33 MDT 2016
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,EST,TM2,PERF
real mem  = 1072513024 (1022MB)
avail mem = 1039314944 (991MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/02/06, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (61 entries)
bios0: vendor IBM version "1RETDPWW (3.21 )" date 06/02/2006
bios0: IBM 2378REU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) DOCK(S4) USB0(S3) USB1(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
C1: unknown FFH class 0: !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(@1 halt!), PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
acpitz0 at acpi0: critical temperature is 93 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"PNP0303" at acpi0 not configured
"IBM0057" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0400" at acpi0 not configured
"ATM1100" at acpi0 not configured
acpibat0 at acpi0: BAT0
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: Enhanced SpeedStep 1799 MHz: speeds: 1800, 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M10" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0xb0000000/0x1000
2:0:1: mem address conflict 0xb1000000/0x1000
cbb0 at pci2 dev 0 function 0 "TI PCI4520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI4520 CardBus" rev 0x01: irq 11
em0 at pci2 dev 1 function 0 "Intel 82540EP" rev 0x03: irq 11, address [_MAC_XXXXXXXXXX]
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11, address [_MAC_XXXXXXXXXX]
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS721060G9AT00>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4242N, 0J04> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (6b49f53d1129046a.a) swap on wd0b dump on wd0b
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r300_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:r300_startup *ERROR* failed initializing CP (-2).
drm:pid0:r300_init *ERROR* Disabling GPU acceleration
ttm_pool_mm_shrink_fini stub
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r300_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:r300_startup *ERROR* failed initializing CP (-2).
drm:pid0:r300_init *ERROR* Disabling GPU acceleration
radeondrm0: 1400x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.