Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-01-08 04:00:53
From: Sevan/ Venture37
Description: iMac G5 1.8Ghz, PowerMac8,1, no bluetooth controller installed
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r310361: Wed Dec 21 15:49:56 UTC 2016
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/powerpc.powerpc/usr/src/sys/GENERIC powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
VT(ofwfb): resolution 1440x900
cpu0: IBM PowerPC 970FX revision 3.0, 900.40 MHz
cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
cpu0: HID0 511081<NAP,DPM,NHR,TBEN,ENATTN>
real memory = 2126036992 (2027 MB)
avail memory = 2019106816 (1925 MB)
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pcr0: <PPC 970 Power Control Register> on cpu0
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 222, bank1 generation 221
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 57
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0
iicbus0: <OFW I2C bus> on iichb0
iicbus0: <unknown card> at addr 0x1c0
htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff irq 224 on unin0
pcib0: <Apple U3 Host-AGP bridge> mem 0xf0000000-0xf1ffffff on ofwbus0
pci0: <OFW PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0xa0000000-0xa7ffffff irq 187 at device 16.0 on pci0
backlight0: <PowerBook backlight for nVidia graphics> on vgapci0
vgapci0: Boot video device
agp0: <Apple U3 AGP Bridge> on hostb0
pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0
pcib1: 86 HT IRQs on device 1.0
pci1: <OFW PCI bus> on pcib1
pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1
pci2: <OFW PCI bus> on pcib2
gem0: <Apple Shasta GMAC Ethernet> mem 0x80400000-0x805fffff irq 168 at device 15.0 on pci2
miibus0: <MII bus> on gem0
bmtphy0: <BCM5221 10/100 media interface> PHY 0 on miibus0
bmtphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: 00:0d:93:
pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1
pci3: <OFW PCI bus> on pcib3
macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci3
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 151,145,146,152,147,148 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 155 on macio0
iicbus1: <OFW I2C bus> on iichb1
iicbus1: <unknown card> at addr 0x1c0
snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 156,139,140,157,141,142 on macio0
pci3: <network> at device 1.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 198 at device 11.0 on pci3
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 198 at device 11.1 on pci3
usbus1 on ohci1
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq 198 at device 11.2 on pci3
usbus2: EHCI version 1.0
usbus2 on ehci0
pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1
pci4: <OFW PCI bus> on pcib4
atapci0: <ServerWorks K2 SATA150 controller> mem 0x80102000-0x80103fff irq 138 at device 12.0 on pci4
pcib1: failed to reserve resource for pcib4
atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ata5: <ATA channel> at channel 3 on atapci0
ata0: <Shasta Kauai ATA Controller> mem 0x80104000-0x80107fff irq 166,165 at device 13.0 on pci4
fwohci0: <1394 Open Host Controller Interface> mem 0x80100000-0x80100fff irq 167 at device 14.0 on pci4
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:0d:93:ff:fe:
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:93:
fwe0: Ethernet address: 02:0d:93:
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
smu0: <Apple System Management Unit> on ofwbus0
iichb2: <SMU I2C controller> on smu0
iicbus2: <OFW I2C bus> on iichb2
ds17750: <Temp-Monitor DS1775> at addr 0x92 on iicbus2
iicbus2: <unknown card> at addr 0xd4
iichb3: <SMU I2C controller> on smu0
iicbus3: <OFW I2C bus> on iichb3
cryptosoft0: <software crypto> on nexus0
NULL mp in getnewvnode()
Timecounter "timebase" frequency 33333333 Hz quality 0
Event timer "decrementer" frequency 33333333 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen1.1: <NEC OHCI root HUB> at usbus1
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <NEC OHCI root HUB> at usbus0
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <NEC EHCI root HUB> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen2.2: <Apple, Inc. Keyboard Hub> at usbus2
uhub3 on uhub2
uhub3: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/95.15, addr 2> on usbus2
cd0 at ata0 bus 0 scbus4 target 0 lun 0
cd0: <MATSHITA DVD-R UJ-825 DBN7> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HDT725032VLA360 V54OA73A> ATA-7 SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 305244MB (625140335 512 byte sectors)uhub3: 3 ports with 2 removable, bus powered
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ada0s4 [rw]...