Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2017-01-12 15:52:01
From: bsiegert
Description: NetBSD 7.1_RC1 on Google Compute Engine
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.1_RC1 (GENERIC.201701060741Z)
total memory = 3839 MB
avail memory = 3710 MB
kern.module.path=/stand/amd64/7.1/modules
mainbus0 (root)
ACPI: RSDP 0xf47a0 000014 (v00 Google)
ACPI: RSDT 0xbfffdf60 000034 (v01 Google GOOGRSDT 00000001 GOOG 00000001)
ACPI: FACP 0xbfffff00 0000F4 (v02 Google GOOGFACP 00000001 GOOG 00000001)
ACPI: DSDT 0xbfffdfa0 0015A3 (v01 Google GOOGDSDT 00000001 GOOG 00000001)
ACPI: FACS 0xbffffec0 000040
ACPI: SSDT 0xbffff670 000843 (v01 Google GOOGSSDT 00000001 GOOG 00000001)
ACPI: APIC 0xbffff580 00006E (v01 Google GOOGAPIC 00000001 GOOG 00000001)
ACPI: WAET 0xbffff550 000028 (v01 Google GOOGWAET 00000001 GOOG 00000001)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 0
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU @ 2.30GHz, id 0x306f0
acpi0 at mainbus0: Intel ACPICA 20131218
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
COM3 (PNP0501) at acpi0 not configured
COM4 (PNP0501) at acpi0 not configured
PEVT (QEMU0001) at acpi0 not configured
ACPI: Enabled 16 GPEs in block 00 to 0F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7110 (rev. 0x03)
piixpm0 at pci0 dev 1 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
piixpm0: SMBus disabled
virtio0 at pci0 dev 3 function 0
virtio0: Virtio Unknown (8) Device (rev. 0x00)
vioscsi0 at virtio0: Features: 0x0
vioscsi0: qsize 8192
scsibus0 at vioscsi0: 253 targets, 1 lun per target
virtio0: interrupting at ioapic0 pin 11
virtio1 at pci0 dev 4 function 0
virtio1: Virtio Network Device (rev. 0x00)
vioif0 at virtio1: Ethernet address xx:xx:xx:xx:xx:xx
virtio1: interrupting at ioapic0 pin 11
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer0: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
sd0 at scsibus0 target 2 lun 0: <Google, PersistentDisk, 1> disk fixed
sd0: fabricating a geometry
sd0: 4096 MB, 4096 cyl, 64 head, 32 sec, 512 bytes/sect x 8388608 sectors
sd0: fabricating a geometry
sd0: async, 8-bit transfers, tagged queueing
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
Thu Jan 12 15:46:27 UTC 2017
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces: vioif0if_route (ADD): Network is unreachable
add net default: gateway xxx.xxx.xxx.xxx
.
Adding interface aliases:.
Waiting for DAD completion for statically configured addresses...
Building databases: dev, utmp, utmpx.
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.