Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-01-27 16:11:29
From: tisihara
Description: DragonFly BSD 4.6.0 Acer Aspire easyStore H340
Copyright (c) 2003-2016 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. MPTABLE: warning duplicated PCI int entry for bus 0, dev 28, pin 0 MPTABLE: warning duplicated PCI int entry for bus 0, dev 28, pin 1 MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0 MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1 DragonFly v4.6.0-RELEASE #0: Mon Aug 1 12:46:25 EDT 2016 [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/build/sys/X86_64_GENERIC i8254 clock: 1193179 Hz TSC clock: 1600064496 Hz CPU: Intel(R) Atom(TM) CPU 230 @ 1.60GHz (1600.06-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Thermal and PM Features=0x1<SENSOR> MONITOR/MWAIT Features=0x3<CST,INTBRK> real memory = 2135415808 (2036 MB) avail memory = 1970397184 (1879 MB) lapic: divisor index 0, frequency 66669337 Hz Initialize MI interrupts VMM: VMX is not supported by this Intel CPU wdog: In-kernel automatic watchdog reset enabled kbd1 at kbdmux0 md0: Malloc disk ACPI: RSDP 0x00000000000F77F0 000024 (v02 PTLTD ) ACPI: XSDT 0x000000007F5E2DF7 000044 (v01 PTLTD ? XSDT 06040000 LTP 00000000) ACPI: FACP 0x000000007F5E7E40 0000F4 (v03 INTEL 06040000 PTL 00000003) ACPI: DSDT 0x000000007F5E2E3B 004F91 (v01 INTEL LAKEPORT 06040000 MSFT 0100000E) ACPI: FACS 0x000000007F5E8FC0 000040 ACPI: FACS 0x000000007F5E8FC0 000040 ACPI: MCFG 0x000000007F5E7F34 00003C (v01 PTLTD MCFG 06040000 LTP 00000000) ACPI: APIC 0x000000007F5E7F70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 0x000000007F5E7FD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. padlock0: No ACE support. rdrand0: No RdRand support. acpi0: <PTLTD XSDT> on motherboard ACPI: 1 ACPI AML tables successfully acquired and loaded ACPI FADT: SCI testing interrupt mode ... ACPI FADT: SCI select level/high objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist acpi0: Power Button (fixed) acpi_timer0 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x18d0-0x18d7 mem 0xf0080000-0xf00bffff,0xd0000000-0xdfffffff,0xf0000000-0xf007ffff irq 16 at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib1: Disable PCI Express hot-plug interrupts(0x0009) pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib2: Disable PCI Express hot-plug interrupts(0x0009) pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: Disable PCI Express hot-plug interrupts(0x0009) pci6: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: Disable PCI Express hot-plug interrupts(0x0009) pci8: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pcib5: Disable PCI Express hot-plug interrupts(0x0009) pci9: <ACPI PCI bus> on pcib5 mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0x2000-0x20ff mem 0xf0300000-0xf0303fff irq 16 at device 0.0 on pci9 msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto msk0: MAC address: [_MAC_XXXXXXXXXX] pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pcib6: Disable PCI Express hot-plug interrupts(0x0009) pci10: <ACPI PCI bus> on pcib6 atapci0: <Marvell ATA controller> port 0x3000-0x300f,0x3010-0x3013,0x3018-0x301f,0x3014-0x3017,0x3020-0x3027 mem 0xf0400000-0xf04003ff irq 17 at device 0.0 on pci10 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0 usbus0: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus1 on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0 usbus1: 12Mbps Full Speed USB v1.0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2 on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0 usbus2: 12Mbps Full Speed USB v1.0 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 usbus3 on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf02c0000-0xf02c03ff irq 23 at device 29.7 on pci0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: EHCI version 1.0 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 usbus4 on ehci0 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib7 usbus4: 480Mbps High Speed USB v2.0 uhub0: 2 ports with 2 removable, self powered isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <AHCI-PCI-SATA> port 0x18c0-0x18cf,0x18d8-0x18db,0x18e0-0x18e7,0x18dc-0x18df,0x18e8-0x18ef mem 0xf02c0400-0xf02c07ff irq 19 at device 31.2 on pci0 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered ahci0: AHCI 1.1 cap 0xc720ff03<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC>, 4 ports, 32 tags/port, gen 2 (3Gbps) ahci0.0: Caps 40006<HPCP,POD,SUD> ahci0.1: Caps 40006<HPCP,POD,SUD> ahci0.2: Caps 40006<HPCP,POD,SUD> ahci0.3: Caps 40006<HPCP,POD,SUD> uhub4: 8 ports with 8 removable, self powered ugen4.2: <SanDisk> at usbus4 umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.27, addr 2> on usbus4 ahci0.0: Found DISK "Hitachi HDT721010SLA360 ST6OA31B" serial="STF607MS20N1YK" ahci0.0: tags=32/32 satacap=1706 satacap2=0000 satafea=005e NCQ=YES capacity=953869.71MB ahci0.0: f85=3469 f86=be01 f87=4763 WC=enabled RA=enabled SEC=frozen ahci0.1: Found DISK "Hitachi HDT721010SLA360 ST6OA31B" serial="STF607MS23KWHK" ahci0.1: tags=32/32 satacap=1706 satacap2=0000 satafea=005e NCQ=YES capacity=953869.71MB ahci0.1: f85=3469 f86=be01 f87=4763 WC=enabled RA=enabled SEC=frozen ahci0.2: Found DISK "Hitachi HDT721010SLA360 ST6OA31B" serial="STF607MS1W2MWK" ahci0.2: tags=32/32 satacap=1706 satacap2=0000 satafea=005e NCQ=YES capacity=953869.71MB ahci0.2: f85=3469 f86=be01 f87=4763 WC=enabled RA=enabled SEC=frozen ahci0.3: No device detected pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 19 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A cpu0: <ACPI CPU> on acpi0 cpu_cst0: <ACPI CPU C-State> on cpu0 clockmod0: <CPU clock modulation> on cpu0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 cpu1: <ACPI CPU> on acpi0 cpu_cst1: <ACPI CPU C-State> on cpu1 clockmod1: <CPU clock modulation> on cpu1 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 ACPI: Enabled 5 GPEs in block 00 to 1F orm0: <ISA Option ROMs> at iomem 0xcb000-0xcbfff,0xdc000-0xdffff on isa0 pmtimer0 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x500 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio2: can't drain, serial port might not exist, disabling hpt27xx: no controller detected. CAM: Configuring 7 busses ugen4.3: <vendor 0x090c> at usbus4 umass1: <vendor 0x090c product 0x1000, class 0/0, rev 2.00/11.00, addr 3> on usbus4 CAM: finished configuring all busses da0 at ahci0 bus 0 target 0 lun 0 da0: <SATA Hitachi HDT72101 ST6O> Fixed Direct Access SCSI-4 device da0: [_SERIAL_NUMBER_XXXXXXXXXXX] da0: 300.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da1 at ahci0 bus 1 target 0 lun 0 da1: <SATA Hitachi HDT72101 ST6O> Fixed Direct Access SCSI-4 device da1: [_SERIAL_NUMBER_XXXXXXXXXXX] da1: 300.000MB/s transfers da1: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da2 at ahci0 bus 2 target 0 lun 0 da2: <SATA Hitachi HDT72101 ST6O> Fixed Direct Access SCSI-4 device da2: [_SERIAL_NUMBER_XXXXXXXXXXX] da2: 300.000MB/s transfers da2: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da8 at umass-sim0 bus 0 target 0 lun 0 da8: <SanDisk Cruzer Fit 1.27> Removable Direct Access SCSI-6 device da8: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da8: 40.000MB/s transfers da8: 14907MB (30529536 512 byte sectors: 255H 63S/T 1900C) da9 at umass-sim1 bus 1 target 0 lun 0 da9: <SMI USB DISK 1100> Fixed Direct Access SCSI-0 device da9: 40.000MB/s transfers da9: 245MB (501760 512 byte sectors: 64H 32S/T 245C) ugen2.2: <vendor 0x0dc6> at usbus2 ukbd0: <EP1 Pipe> on usbus2 kbd2 at ukbd0 ums0: <EP2 Pipe> on usbus2 ums0: 3 buttons and [XYZ] coordinates ID=0 no B_DEVMAGIC (bootdev=0) Mounting root from ufs:serno/4C530001230502105310.s1d DMA space used: 6176k, remaining available: 128088k Mounting devfs HAMMER(DATA) recovery check seqno=00200136 HAMMER(DATA) recovery range 300000000001cf38-300000000001cf38 HAMMER(DATA) recovery nexto 300000000001cf38 endseqno=00200137 HAMMER(DATA) mounted clean, no recovery needed swap low/high-water marks set to 31440/47160