Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-03-19 09:28:47
From: sin
Description: HPE ProLiant MicroServer Gen8
Copyright (c) 2003-2017 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v4.8.0rc.2.g69c8d-RELEASE #67: Fri Mar 17 17:51:44 GMT 2017
[_EMAIL_XXXXXXXXXXXX]:/usr/obj/usr/src/sys/X86_64_GENERIC
i8254 clock: 1193191 Hz
TSC invariant clock: 2294798856 Hz
CPU: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz (2294.80-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x59ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 10700179456 (10204 MB)
avail memory = 9995030528 (9532 MB)
lapic: divisor index 0, frequency 49886813 Hz
srat_probe: can't locate SRAT
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 71712464, shift 5
VMM: available, disabled by default
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
interrupt uses mplock: swi_taskq
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
ACPI: XSDT 0x00000000F1DE6400 0000B4 (v01 HP ProLiant 00000002 ?? 0000162E)
ACPI: FACP 0x00000000F1DE6540 0000F4 (v03 HP ProLiant 00000002 ?? 0000162E)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20170303/tbfadt-750)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20170303/tbfadt-750)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170303/tbfadt-853)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20170303/tbfadt-853)
ACPI: DSDT 0x00000000F1DE6640 001C1A (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x00000000F1DE4140 000040
ACPI: FACS 0x00000000F1DE4140 000040
ACPI: SPCR 0x00000000F1DE4180 000050 (v01 HP SPCRRBSU 00000001 ?? 0000162E)
ACPI: MCFG 0x00000000F1DE4200 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 0x00000000F1DE4240 000038 (v01 HP ProLiant 00000002 ?? 0000162E)
ACPI: FFFF 0x00000000F1DE4280 000064 (v02 HP ProLiant 00000002 ?? 0000162E)
ACPI: SPMI 0x00000000F1DE4300 000040 (v05 HP ProLiant 00000001 ?? 0000162E)
ACPI: ERST 0x00000000F1DE4340 000230 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: APIC 0x00000000F1DE4580 000252 (v01 HP ProLiant 00000002 00000000)
ACPI: FFFF 0x00000000F1DE4800 000176 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: BERT 0x00000000F1DE4980 000030 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: HEST 0x00000000F1DE49C0 0000BC (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: FFFF 0x00000000F1DE4A80 001914 (v01 HP ProLiant 00000001 ?? 0000162E)
ACPI: FFFF 0x00000000F1DE63C0 00002D (v01 HP ProLiant 00000001 00000000)
ACPI: SSDT 0x00000000F1DE8280 000137 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 0x00000000F1DE83C0 000177 (v03 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 0x00000000F1DE8540 0001E1 (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 0x00000000F1DE8740 000377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 0x00000000F1DE8AC0 000504 (v01 INTEL PPM RCM 80000001 INTL 20061109)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
acpi0: <HP ProLiant> on motherboard
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacf0000-0xfacf03ff irq 21 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci13: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib4
bnx0: <Broadcom BCM5720 Gigabit Ethernet> mem 0xfabd0000-0xfabdffff,0xfabe0000-0xfabeffff,0xfabf0000-0xfabfffff irq 16 at device 0.0 on pci3
bnx0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200
bnx0: APE FW version: NCSI v1.2.46.0
miibus0: <MII bus> on bnx0
brgphy0: <BCM5720C 10/100/1000baseT PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
usbus0: 480Mbps High Speed USB v2.0
bnx0: MAC address: [_MAC_XXXXXXXXXX]
bnx1: <Broadcom BCM5720 Gigabit Ethernet> mem 0xfaba0000-0xfabaffff,0xfabb0000-0xfabbffff,0xfabc0000-0xfabcffff irq 17 at device 0.1 on pci3
bnx1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200
bnx1: APE FW version: NCSI v1.2.46.0
miibus1: <MII bus> on bnx1
brgphy1: <BCM5720C 10/100/1000baseT PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
bnx1: MAC address: [_MAC_XXXXXXXXXX]
pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci4: <ACPI PCI bus> on pcib5
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbff0000-0xfbff1fff irq 18 at device 0.0 on pci4
xhci0: 64 bytes context size, 32-bit DMA
usbus1 on xhci0
pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci1: <ACPI PCI bus> on pcib6
pci1: <base peripheral> (vendor 0x103c, dev 0x3306) at device 0.0 irq 19
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfb7fffff,0xfbee0000-0xfbee3fff,0xf9000000-0xf9ffffff irq 16 at device 0.1 on pci1
vgapci0: Boot video device
usbus1: 5.0Gbps Super Speed USB v3.0
pci1: <base peripheral> (vendor 0x103c, dev 0x3307) at device 0.2 irq 16
uhci0: <UHCI (generic) USB controller> port 0x4000-0x401f irq 16 at device 0.4 on pci1
ugen1.1: <0x1912> at usbus1
uhub1: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
usbus2 on uhci0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xface0000-0xface03ff irq 20 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen2.1: <0x103c> at usbus2
uhub2: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3 on ehci1
pcib7: <MPTABLE PCI-PCI bridge> at device 30.0 on pci0
pci20: <PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
usbus3: 480Mbps High Speed USB v2.0
ahci0: <AHCI-PCI-SATA> port 0x10e0-0x10ff,0x10d8-0x10db,0x10d0-0x10d7,0x10c8-0x10cb,0x10c0-0x10c7 mem 0xfacd0000-0xfacd07ff irq 17 at device 31.2 on pci0
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: 6 ports with 6 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ahci0: AHCI 1.3 cap 0xff32ff45<S64A,NCQ,SSNTF,SMPS,SSS,SALP,SAL,SCLO,SPM,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 6 ports, 32 tags/port, gen 3 (6Gbps)
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen3.2: <vendor 0x8087> at usbus3
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
uhub4: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen3.3: <vendor 0x0424> at usbus3
uhub6: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus3
uhub6: 2 ports with 1 removable, self powered
ahci0.4: No device detected
ahci0.3: No device detected
ahci0.5: No device detected
ahci0.1: PMPROBE(2) No Port Multiplier was found.
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.2: PMPROBE(2) No Port Multiplier was found.
ahci0.1: PMPROBE(2) No Port Multiplier was found.
ahci0.0: PMPROBE(2) No Port Multiplier was found.
ahci0.2: PMPROBE(2) No Port Multiplier was found.
ahci0.0: Found DISK "WDC WD30EFRX-68EUZN0 82.00A82" serial="WD-WCC4N3VR22N6"
ahci0.0: tags=32/32 satacap=9f0e satacap2=0006 satafea=004c NCQ=YES capacity=2861588.46MB
ahci0.0: f85=7449 f86=bc41 f87=6723 WC=enabling RA=enabled SEC=frozen
ahci0.1: Found SSD "Samsung SSD 840 PRO Series DXM04B0Q" serial="S12RNEAD302207Z"
ahci0.1: tags=32/32 satacap=850e satacap2=00c6 satafea=016c NCQ=YES capacity=244198.33MB
ahci0.1: f85=7449 f86=bc01 f87=4163 WC=enabling RA=enabled SEC=frozen
ahci0.2: Found DISK "WDC WD40EFRX-68WT0N0 82.00A82" serial="WD-WCC4E7XXN286"
ahci0.2: tags=32/32 satacap=9f0e satacap2=0004 satafea=004c NCQ=YES capacity=3815447.83MB
ahci0.2: f85=7449 f86=bc41 f87=6723 WC=enabling RA=enabled SEC=frozen
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
cpu_pst0: Can't get _PCT package - AE_NOT_FOUND
device_probe_and_attach: cpu_pst0 attach returned 6
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: acpi id mismatch, madt 2, processor object 1
cpu1: <ACPI CPU> on acpi0
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
cpu_pst1: Can't get _PCT package - AE_NOT_FOUND
device_probe_and_attach: cpu_pst1 attach returned 6
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
hpt27xx: no controller detected.
CAM: Configuring 6 busses
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA WDC WD30EFRX-68E 82.0> Fixed Direct Access SCSI-4 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da1 at ahci0 bus 1 target 0 lun 0
da1: <SATA Samsung SSD 840 DXM0> Fixed Direct Access SCSI-4 device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: 244198MB (500118192 512 byte sectors: 255H 63S/T 31130C)
da1: supports TRIM
da2 at ahci0 bus 2 target 0 lun 0
da2: <SATA WDC WD40EFRX-68W 82.0> Fixed Direct Access SCSI-4 device
da2: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da2: 300.000MB/s transfers
da2: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da0: slice >2TB, using media size instead of slice table size
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/WD-WCC4N3VR22N6.s1d:/dev/da2
HAMMER(ROOT) recovery check seqno=2f3a22bd
HAMMER(ROOT) recovery range 3000000009492c98-3000000009492c98
HAMMER(ROOT) recovery nexto 3000000009492c98 endseqno=2f3a22be
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 13348k, remaining available: 131072k
Mounting devfs
swap low/high-water marks set to 2013263/3019895