Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2017-04-11 18:04:08
From: Maciej Suszko
Description: HP ProLiant DL185 G5
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): resolution 640x480
CPU: Quad-Core AMD Opteron(tm) Processor 2356 (2294.30-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100f23  Family=0x10  Model=0x2  Stepping=3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
  SVM: (disabled in BIOS) NP,NAsids=64
  TSC: P-state invariant
real memory  = 13555990528 (12928 MB)
avail memory = 12420354048 (11844 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 4 range: 54 vs 53
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pci2: <ACPI PCI bus> on pcib2
bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xdedf0000-0xdedfffff irq 40 at device 2.0 on pci2
bge0: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X 133 MHz
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xdedd0000-0xdeddffff irq 39 at device 2.1 on pci2
bge1: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X 133 MHz
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 1000BASE-T media interface> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: xx:xx:xx:xx:xx:xx
atapci0: <ServerWorks HT1000 SATA150 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd41f mem 0xdecfe000-0xdecfffff irq 5 at device 14.0 on pci1
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ata5: <ATA channel> at channel 3 on atapci0
atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0xb800-0xb8ff mem 0xdebff000-0xdebfffff irq 10 at device 3.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> port 0xb400-0xb4ff mem 0xdebfe000-0xdebfefff irq 10 at device 3.1 on pci0
usbus1 on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> port 0xb000-0xb0ff mem 0xdebfd000-0xdebfdfff irq 10 at device 3.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
pcib3: <ACPI PCI-PCI bridge> irq 36 at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ciss0: <HP Smart Array P400> port 0xe800-0xe8ff mem 0xdef00000-0xdeffffff,0xdeeff000-0xdeefffff irq 35 at device 0.0 on pci4
ciss0: PERFORMANT Transport
pcib5: <ACPI PCI-PCI bridge> irq 34 at device 8.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 33 at device 9.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 32 at device 10.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdfffc000-0xdfffffff,0xdf000000-0xdf7fffff irq 42 at device 0.0 on pci7
vgapci0: Boot video device
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcf000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
usbus0: 12Mbps Full Speed USB v1.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <0x1166> at usbus0
uhub0: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <0x1166> at usbus1
uhub1: <0x1166 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <0x1166> at usbus2
uhub2: <0x1166 EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ugen0.2: <DELL> at usbus0
ukbd0: <DELL Dell USB Entry Keyboard, class 0/0, rev 1.10/1.78, addr 2> on usbus0
kbd2 at ukbd0
ugen2.2: <vendor 0x04b4> at usbus2
uhub3: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2> on usbus2
uhub3: 4 ports with 4 removable, self powered
da0 at ciss0 bus 0 scbus6 target 0 lun 0
da0: <HP RAID ADG OK> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number P61630E9SV67RP
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 19076970MB (39069634736 512 byte sectors)
SMP: AP CPU #7 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
cd0 at ata0 bus 0 scbus4 target 0 lun 0
cd0: <TEAC DV-28E-V C.AB> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/gpt/rootfs [rw,noatime]...
ugen2.3: <ServerEngines> at usbus2
ukbd1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus2
kbd3 at ukbd1
bge0: link state changed to DOWN
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus2
ums0: 8 buttons and [XYZ] coordinates ID=0
bge0: link state changed to UP
bge0.11: link state changed to UP