Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2017-05-09 23:53:56
From: jcharbs
Description: Raspberry Pi 2 Model B FreeBSD 12.0-Current
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r317181: Thu Apr 20 14:53:02 UTC 2017
    xxx@xxx.xxx:/usr/obj/arm.armv6/usr/src/sys/GENERIC arm
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
CPU Features: 
  Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
  PXN, LPAE, Coherent Walk
Optional instructions: 
  SDIV/UDIV, UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:2 
Cache level 1:
 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory  = 989851648 (943 MB)
avail memory = 951128064 (907 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x3f000000-0x3fffffff on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff irq 4 on simplebus0
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 5,6,7,8 on simplebus0
gpio0: read-only pins: 46,48-53.
gpio0: reserved pins: 48-53.
gpiobus0: <OFW GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x104000-0x10401f irq 9 on simplebus0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 10 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 11 on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 12 on simplebus0
spibus0: <OFW SPI bus> on spi0
spigen0: <SPI Generic IO> at cs 0 mode 0 on spibus0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 13,14,15,16,17,18,19,20,21,22,23,24,25 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 26 on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 27 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 28 on simplebus0
uart0: console (115200,n,8,1)
vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f irq 29 on simplebus0
vchiq: local ver 8 (min 3), remote ver 8.
pcm0: <VCHIQ audio> on vchiq0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x980000-0x99ffff irq 30 on simplebus0
usbus0 on bcm283x_dwcotg0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 1360x768(1360x768@0,0) 24bpp
fb0: fbswap: 1, pitch 4080, base 0x3d6fe000, screen_size 3133440
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 32GB <SDHC SS32G 8.0 SN 439E724B MFG 07/2015 by 3 SD> at mmc0 41.6MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 1 port with 1 removable, self powered
arc4random: no preloaded entropy cache
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
WARNING: / was not properly dismounted
warning: no time-of-day clock registered, system time will not be set accurately
arc4random: no preloaded entropy cache
arc4random: no preloaded entropy cache
ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: xx:xx:xx:xx:xx:xx
ugen0.4: <PixArt USB Optical Mouse> at usbus0
ums0 on uhub1
ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen0.5: <SIGMACHIP USB Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 5> on usbus0
kbd1 at ukbd0
uhid0 on uhub1
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 5> on usbus0
ugen0.4: <PixArt USB Optical Mouse> at usbus0 (disconnected)
ums0: at uhub1, port 3, addr 4 (disconnected)
ums0: detached
ugen0.4: <PixArt USB Optical Mouse> at usbus0
ums0 on uhub1
ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen0.4: <PixArt USB Optical Mouse> at usbus0 (disconnected)
ums0: at uhub1, port 3, addr 4 (disconnected)
ums0: detached
ugen0.4: <PixArt USB Optical Mouse> at usbus0
ums0 on uhub1
ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
random: unblocking device.
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP