Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-05-31 06:21:59
From: Paco
Description: Toshiba Satelite 510
pcm1: Playback: pcm1: Stream cap: 0x00000005 AC3 PCM pcm1: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm1: DAC: 2 pcm1: pcm1: nid=5 [pin: Digital-out (Jack)] pcm1: + <- nid=2 [audio output] [src: pcm] pcm1: pcm1: Master Volume (OSS: vol): 0/0dB pcm1: +- ctl 2 (nid 5 in ): mute pcm1: pcm1: PCM Volume (OSS: pcm): 0/0dB pcm1: +- ctl 2 (nid 5 in ): mute pcm1: pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: Soft PCM mixer ENABLED pcm1: Playback channel matrix is: unknown, assuming 7.1 (disconnected) random: harvesting attach, 8 bytes (4 bits) from pcm1 random: harvesting attach, 8 bytes (4 bits) from hdaa1 random: harvesting attach, 8 bytes (4 bits) from hdacc1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ata2: SATA reset: ports status=0x00 uhub0: 2 ports with 2 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub0 uhub1: 2 ports with 2 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub1 ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ata3: SATA reset: ports status=0x02 ata3: p0: SATA connect time=0ms status=00000123 ata3: p1: SATA connect timeout status=00000000 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata4: SATA reset: ports status=0x01 ata4: p0: SATA connect time=0ms status=00000113 ata4: reset tp1 mask=01 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0x10000 ata5: SATA reset: ports status=0x00 acpi_acad0: acline initialization start battery0: battery initialization start ada0 at ata3 bus 0 scbus1 target 0 lun 0 ada0: <TOSHIBA MK5065GSX GJ003M> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) GEOM: new disk ada0 pass0 at ata3 bus 0 scbus1 target 0 lun 0 pass0: <TOSHIBA MK5065GSX GJ003M> ATA8-ACS SATA 2.x device cd0 at ata4 bus 0 scbus2 target 0 lun 0 cd0: <TSSTcorp CDDVDW TS-L633C TF02> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed pass0: [_SERIAL_NUMBER_XXXXXX] pass0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) pass1 at ata4 bus 0 scbus2 target 0 lun 0 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times pass1: <TSSTcorp CDDVDW TS-L633C TF02> Removable CD-ROM SCSI device pass1: [_SERIAL_NUMBER_XXXXXXXXXXX] pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, uhub2: 6 ports with 6 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub2 ATAPI 12bytes, PIO 8192bytes) lapic4: CMCI unmasked lapic5: CMCI unmasked SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000100f2 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 4 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 4 vector 49 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 4 vector 50 msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48 msi: Assigning MSI-X IRQ 258 to local APIC 4 vector 51 msi: Assigning MSI-X IRQ 259 to local APIC 5 vector 48 msi: Assigning MSI IRQ 264 to local APIC 4 vector 52 SMP: passed TSC synchronization test Timecounter "TSC" frequency 2128059860 Hz quality 1000 Trying to mount root from zfs:tank/ROOT/12.0-CURRENT-up-20170424_155652 []... GEOM: new disk cd0 Root mount waiting for: usbus1 usbus0 uhub3: 8 ports with 8 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub3 ugen0.3: <Chicony Electronics Co., Ltd. USB2.0 UVC WebCam> at usbus0 ugen1.3: <Logitech USB Optical Mouse> at usbus1 start_init: trying /sbin/init Linux ELF exec handler installed Linux x86-64 ELF exec handler installed pci0: driver added found-> vendor=0x8086, dev=0x3b64, revid=0x06 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x3b30, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 pci0:0:31:3: reprobing on driver added found-> vendor=0x8086, dev=0x3b32, revid=0x05 domain=0, bus=0, slot=31, func=6 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:31:6: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PCI0.TMRP pci0:0:31:6: Transition from D3 to D0 pci0:0:31:6: Transition from D0 to D3 pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x8172, revid=0x10 domain=0, bus=6, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:6:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX pci0:6:0:0: Transition from D3 to D0 pci0:6:0:0: Transition from D0 to D3 pci3: driver added pci4: driver added pci5: driver added pci6: driver added pci7: driver added pci8: driver added pci0: driver added found-> vendor=0x8086, dev=0x3b64, revid=0x06 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x3b30, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 pci0:0:31:3: reprobing on driver added found-> vendor=0x8086, dev=0x3b32, revid=0x05 domain=0, bus=0, slot=31, func=6 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:31:6: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PCI0.TMRP pci0:0:31:6: Transition from D3 to D0 pci0:0:31:6: Transition from D0 to D3 pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x8172, revid=0x10 domain=0, bus=6, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:6:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX pci0:6:0:0: Transition from D3 to D0 pci0:6:0:0: Transition from D0 to D3 pci3: driver added pci4: driver added pci5: driver added pci6: driver added pci7: driver added pci8: driver added firmware: 'runfw' version 1: 8192 bytes loaded at 0xffffffff827160a8 pci0: driver added found-> vendor=0x8086, dev=0x3b64, revid=0x06 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x3b30, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 pci0:0:31:3: reprobing on driver added found-> vendor=0x8086, dev=0x3b32, revid=0x05 domain=0, bus=0, slot=31, func=6 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:31:6: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PCI0.TMRP pci0:0:31:6: Transition from D3 to D0 pci0:0:31:6: Transition from D0 to D3 pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x8172, revid=0x10 domain=0, bus=6, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:6:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX pci0:6:0:0: Transition from D3 to D0 pci0:6:0:0: Transition from D0 to D3 pci3: driver added pci4: driver added pci5: driver added pci6: driver added pci7: driver added pci8: driver added Cuse v0.1.34 @ /dev/cuse linsysfs registered firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff827a60b0 firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff827d50b0 firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff828280b0 firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff8287c0b0 firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff828cf0b0 firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff8293f0b8 firmware: 'iwn6000g2bfw' version 0: 679436 bytes loaded at 0xffffffff829e50b8 firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff82a8c0b0 acpi_video0: <ACPI video extension> on vgapci0 random: harvesting attach, 8 bytes (4 bits) from acpi_video0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ums0 on uhub3 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 3> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 random: harvesting attach, 8 bytes (4 bits) from ums0 debugfs registered [drm] Initialized drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Memory usable by graphics device = 2048M [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Connector LVDS-1: get mode from tunables: [drm] - kern.vt.fb.modes.LVDS-1 [drm] - kern.vt.fb.default_mode [drm] Connector VGA-1: get mode from tunables: [drm] - kern.vt.fb.modes.VGA-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] RC6 disabled, disabling runtime PM support [drm] Initialized i915 1.6.0 20160919 for drmn on minor 0 random: harvesting attach, 8 bytes (4 bits) from drmn0 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=11 height=768 width=1366 depth=32 cmsize=16 size=4227072 pbase=0xc0046000 vbase=0xfffff800c0046000 name=drmn0 flags=0x0 stride=5504 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device GEOM_ELI: Device label/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software linprocfs registered hdac0: poll interval 1000 -> 500 ticks ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled re0: link state changed to DOWN battery0: battery initialization failed, giving up hdac0: poll interval 500 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 500 ticks re0: link state changed to UP pid 1843 (PCDM-session), uid 0: exited on signal 6 GEOM_ELI: Device label/swap0.eli destroyed. GEOM_ELI: Detached label/swap0.eli on last close. Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `bufdaemon' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done All buffers synced. Uptime: 6m33s Table 'FACP' at 0xbb7fc000 Table 'HPET' at 0xbb7fb000 Table 'APIC' at 0xbb7fa000 APIC: Found table at 0xbb7fa000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 4 ACPI ID 3: enabled SMP: Added CPU 4 (AP) MADT: Found CPU APIC ID 5 ACPI ID 4: enabled SMP: Added CPU 5 (AP) MADT: Found CPU APIC ID 0 ACPI ID 5: disabled MADT: Found CPU APIC ID 0 ACPI ID 6: disabled MADT: Found CPU APIC ID 0 ACPI ID 7: disabled MADT: Found CPU APIC ID 0 ACPI ID 8: disabled Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #48 d44fdf245(drm-next): Thu Mar 30 18:18:02 UTC 2017 root@gauntlet:/usr/obj/usr/src/sys/GENERIC amd64 clang version 4.0.0 (tags/RELEASE_400/rc3) Table 'FACP' at 0xbb7fc000 Table 'HPET' at 0xbb7fb000 Table 'APIC' at 0xbb7fa000 Table 'MCFG' at 0xbb7f9000 Table 'ASF!' at 0xbb7f8000 Table 'SLIC' at 0xbb7e8000 Table 'SSDT' at 0xbb7e7000 Table 'UEFI' at 0xbb7e6000 Table 'UEFI' at 0xbb7e5000 Table 'UEFI' at 0xbb7e4000 ACPI: No SRAT table found PPIM 0: PA=0xa0000, VA=0xffffffff82610000, size=0x10000, mode=0 VT(vga): resolution 640x480 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff823f1000. Preloaded /boot/entropy "/boot/entropy" at 0xffffffff823f1fb8. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff823f2008. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff823f2870. Preloaded elf obj module "/boot/kernel/geom_eli.ko" at 0xffffffff823f2ea0. Preloaded elf obj module "/boot/kernel/tmpfs.ko" at 0xffffffff823f3550. Preloaded elf obj module "/boot/kernel/aesni.ko" at 0xffffffff823f3bf8. Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff823f42e0. Calibrating TSC clock ... TSC clock: 2128055844 Hz CPU: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (2128.06-MHz K8-class CPU) Origin="GenuineIntel" Id=0x20652 Family=0x6 Model=0x25 Stepping=2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28000800<SYSCALL,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE> Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr> Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE> Secondary Processor Controls=0xff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG> Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV> Entry Controls=0xda0400 EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all> VPID Features=0xf01<INVVPID,individual,single,all,single-globals> TSC: P-state invariant, performance statistics Data TLB0: 2-MByte or 4 MByte pages, 4-way set associative, 32 entries Data TLB: 4 KB pages, 4-way set associative, 64 entries Instruction TLB: 2-MByte or 4-MByte pages, fully associative, 7 entries 3rd-level cache: 3 MByte, 12-way set associative, 64 byte line size Instruction TLB: 4KByte pages, 4-way set associative, 64 entries 64-Byte prefetching 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size 2nd-level cache: 256 KBytes, 8-way set associative, 64 byte line size Shared 2nd-Level TLB: 4 KByte pages, 4-way associative, 512 entries 1st-level instruction cache: 32 KB, 4-way set associative, 64 byte line size L2 cache: 256 kbytes, 8-way associative, 64 bytes/line real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000010000 - 0x000000000009afff, 569344 bytes (139 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x000000000243d000 - 0x00000000b33fefff, 2969313280 bytes (724930 pages) 0x00000000bb40f000 - 0x00000000bb652fff, 2375680 bytes (580 pages) 0x00000000bb79f000 - 0x00000000bb7e3fff, 282624 bytes (69 pages) 0x00000000bb7ff000 - 0x00000000bb7fffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x0000000137fe7fff, 939425792 bytes (229352 pages) avail memory = 3880812544 (3701 MB) Event timer "LAPIC" quality 600 LAPIC specific EOI enabled LAPIC: ipi_wait() us multiplier 46 (r 4608332 tsc 2128055844) ACPI APIC Table: <TOSCPL TOSCPL00> Package ID shift: 4 L3 cache ID shift: 4 L2 cache ID shift: 1 L1 cache ID shift: 1 Core ID shift: 1 INTR: Adding local APIC 4 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads Package HW ID = 0 Core HW ID = 0 CPU0 (BSP): APIC ID: 0 CPU1 (AP/HT): APIC ID: 1 Core HW ID = 2 CPU2 (AP): APIC ID: 4 CPU3 (AP/HT): APIC ID: 5 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 lapic0: CMCI unmasked Pentium Pro MTRR support enabled x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 x86bios: SSEG 0x09a000-0x09afff at 0xfffffe00e97f7000 x86bios: EBDA 0x09e000-0x09ffff at 0xfffff8000009e000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 random: read 4096 bytes from preloaded cache random: unblocking device. WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0x00000000000F00E0 000024 (v02 TOSCPL) ACPI: XSDT 0x00000000BB7FE120 000074 (v01 TOSCPL TOSCPL00 00000074 01000013) ACPI: FACP 0x00000000BB7FC000 0000F4 (v03 TOSCPL TOSCPL00 00000074 LOHR 0000005F) ACPI: DSDT 0x00000000BB7EB000 00C4B2 (v02 TOSCPL CALPELLA 00000001 INTL 20050624) ACPI: FACS 0x00000000BB721000 000040 ACPI: FACS 0x00000000BB721000 000040 ACPI: HPET 0x00000000BB7FB000 000038 (v01 TOSCPL TOSCPL00 00000001 LOHR 0000005F) ACPI: APIC 0x00000000BB7FA000 000098 (v01 TOSCPL TOSCPL00 00000001 LOHR 0000005F) ACPI: MCFG 0x00000000BB7F9000 00003C (v01 TOSCPL TOSCPL00 00000001 LOHR 0000005F) ACPI: ASF! 0x00000000BB7F8000 0000A5 (v32 TOSCPL TOSCPL00 00000001 LOHR 0000005F) ACPI: SLIC 0x00000000BB7E8000 000176 (v01 TOSCPL TOSCPL00 00000001 PTL 00000001) ACPI: SSDT 0x00000000BB7E7000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: UEFI 0x00000000BB7E6000 00003E (v01 PTL PTLBUFH? 00000001 PTL 00000001) ACPI: UEFI 0x00000000BB7E5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) ACPI: UEFI 0x00000000BB7E4000 0000DA (v01 PTL PTLSWI 00000001 PTL 00000001) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: ver 0x20 maxredir 0x17 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level MADT: Ignoring local NMI routed to ACPI CPU 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 random: entropy device external interface wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 netmap: loaded module null: <full device, null device, zero device> nfslock: pseudo-device crypto: <crypto core> module_register_init: MOD_LOAD (vesa, 0xffffffff80f56de0, 0) error 19 io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> hptnr: R750/DC7280 controller driver v1.1.4 hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 hpt27xx: RocketRAID 27xx controller driver v1.2.7 nexus0 vtvga0: <VT VGA driver> on motherboard random: harvesting attach, 8 bytes (4 bits) from vtvga0 random: harvesting attach, 8 bytes (4 bits) from ram0 cryptosoft0: <software crypto> on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 random: harvesting attach, 8 bytes (4 bits) from cryptosoft0 aesni0: No AESNI support. acpi0: <TOSCPL TOSCPL00> on motherboard ACPI: 2 ACPI AML tables successfully acquired and loaded PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: Power Button (fixed) random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0 random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1 acpi0: reservation of 0, 1000 (3) failed cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0 cpu0: <ACPI CPU> on acpi0 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80003B58800 0003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80003AAA000 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20050624) random: harvesting attach, 8 bytes (4 bits) from cpu0 cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1 cpu1: <ACPI CPU> on acpi0 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80003B57800 000303 (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFF80003A6C000 000119 (v01 PmRef ApCst 00003000 INTL 20050624) random: harvesting attach, 8 bytes (4 bits) from cpu1 cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2 cpu2: <ACPI CPU> on acpi0 random: harvesting attach, 8 bytes (4 bits) from cpu2 cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3 cpu3: <ACPI CPU> on acpi0 random: harvesting attach, 8 bytes (4 bits) from cpu3 ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic hpet0: t1: irqs 0x00f00000 (0), MSI hpet0: t2: irqs 0x00f00800 (0), MSI hpet0: t3: irqs 0x00f01000 (0), MSI hpet0: t4: irqs 0x00000000 (0), MSI hpet0: t5: irqs 0x00000000 (0), MSI hpet0: t6: irqs 0x00000000 (0), MSI hpet0: t7: irqs 0x00000000 (0), MSI Timecounter "HPET" frequency 14318180 Hz quality 950 msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 msi: routing MSI-X IRQ 257 to local APIC 0 vector 50 msi: routing MSI-X IRQ 258 to local APIC 0 vector 51 msi: routing MSI-X IRQ 259 to local APIC 0 vector 52 msi: routing MSI-X IRQ 260 to local APIC 0 vector 53 msi: routing MSI-X IRQ 261 to local APIC 0 vector 54 msi: routing MSI-X IRQ 262 to local APIC 0 vector 55 msi: routing MSI-X IRQ 263 to local APIC 0 vector 56 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 random: harvesting attach, 8 bytes (4 bits) from hpet0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 Event timer "RTC" frequency 32768 Hz quality 0 random: harvesting attach, 8 bytes (4 bits) from atrtc0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58 Event timer "i8254" frequency 1193182 Hz quality 100 random: harvesting attach, 8 bytes (4 bits) from attimer0 ACPI timer: 0/4 1/3 0/4 0/4 0/4 0/4 1/3 0/4 0/4 0/4 -> 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 random: harvesting attach, 8 bytes (4 bits) from acpi_timer0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 random: harvesting attach, 8 bytes (4 bits) from acpi_ec0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link0 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link1 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link2 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link3 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link4 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link5 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link6 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 random: harvesting attach, 8 bytes (4 bits) from pci_link7 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: decoding 5 range 0-0xfe pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xfdff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xbb800000-0xfeafffff pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x0044, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x0046, revid=0x02 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd0000000, size 22, enabled pcib0: allocated type 3 (0xd0000000-0xd03fffff) for rid 10 of pci0:0:2:0 map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0 map[20]: type I/O Port, range 32, base 0xa080, size 3, enabled pcib0: allocated type 4 (0xa080-0xa087) for rid 20 of pci0:0:2:0 pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3b64, revid=0x06 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd6605000, size 4, enabled pcib0: allocated type 3 (0xd6605000-0xd660500f) for rid 10 of pci0:0:22:0 pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x3b3c, revid=0x05 domain=0, bus=0, slot=26, func=0 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd6608000, size 10, enabled pcib0: allocated type 3 (0xd6608000-0xd66083ff) for rid 10 of pci0:0:26:0 pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 ehci early: SMM active, request owner change found-> vendor=0x8086, dev=0x3b56, revid=0x05 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd6600000, size 14, enabled pcib0: allocated type 3 (0xd6600000-0xd6603fff) for rid 10 of pci0:0:27:0 pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x3b42, revid=0x05 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 secbus=1, subbus=5 found-> vendor=0x8086, dev=0x3b44, revid=0x05 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 secbus=6, subbus=10 found-> vendor=0x8086, dev=0x3b46, revid=0x05 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 secbus=11, subbus=15 found-> vendor=0x8086, dev=0x3b48, revid=0x05 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 secbus=16, subbus=20 found-> vendor=0x8086, dev=0x3b4a, revid=0x05 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 secbus=21, subbus=25 found-> vendor=0x8086, dev=0x3b4c, revid=0x05 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 secbus=26, subbus=30 found-> vendor=0x8086, dev=0x3b34, revid=0x05 domain=0, bus=0, slot=29, func=0 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd6607000, size 10, enabled pcib0: allocated type 3 (0xd6607000-0xd66073ff) for rid 10 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0xa5 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) secbus=31, subbus=31 found-> vendor=0x8086, dev=0x3b09, revid=0x05 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3b28, revid=0x05 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xa078, size 3, enabled pcib0: allocated type 4 (0xa078-0xa07f) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0xa094, size 2, enabled pcib0: allocated type 4 (0xa094-0xa097) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0xa070, size 3, enabled pcib0: allocated type 4 (0xa070-0xa077) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0xa090, size 2, enabled pcib0: allocated type 4 (0xa090-0xa093) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0xa050, size 4, enabled pcib0: allocated type 4 (0xa050-0xa05f) for rid 20 of pci0:0:31:2 map[24]: type I/O Port, range 32, base 0xa040, size 4, enabled pcib0: allocated type 4 (0xa040-0xa04f) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3b30, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 64, base 0xd6604000, size 8, enabled pcib0: allocated type 3 (0xd6604000-0xd66040ff) for rid 10 of pci0:0:31:3 map[20]: type I/O Port, range 32, base 0xefa0, size 5, enabled pcib0: allocated type 4 (0xefa0-0xefbf) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x3b2d, revid=0x05 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xa068, size 3, enabled pcib0: allocated type 4 (0xa068-0xa06f) for rid 10 of pci0:0:31:5 map[14]: type I/O Port, range 32, base 0xa08c, size 2, enabled pcib0: allocated type 4 (0xa08c-0xa08f) for rid 14 of pci0:0:31:5 map[18]: type I/O Port, range 32, base 0xa060, size 3, enabled pcib0: allocated type 4 (0xa060-0xa067) for rid 18 of pci0:0:31:5 map[1c]: type I/O Port, range 32, base 0xa088, size 2, enabled pcib0: allocated type 4 (0xa088-0xa08b) for rid 1c of pci0:0:31:5 map[20]: type I/O Port, range 32, base 0xa030, size 4, enabled pcib0: allocated type 4 (0xa030-0xa03f) for rid 20 of pci0:0:31:5 map[24]: type I/O Port, range 32, base 0xa020, size 4, enabled pcib0: allocated type 4 (0xa020-0xa02f) for rid 24 of pci0:0:31:5 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x3b32, revid=0x05 domain=0, bus=0, slot=31, func=6 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd6606000, size 12, enabled pcib0: allocated type 3 (0xd6606000-0xd6606fff) for rid 10 of pci0:0:31:6 pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 random: harvesting attach, 8 bytes (4 bits) from hostb0 vgapci0: <VGA-compatible display> port 0xa080-0xa087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: <Intel Ironlake (M) SVGA controller> on vgapci0 pcib0: allocated type 3 (0xbb800000-0xbb800fff) for rid 64 of agp0 agp0: Allocated flush page phys 0xbb800000 virt 0xfffff800bb800000 agp0: aperture size is 256M, detected 32764k stolen memory agp0: AGP_I965_PGTBL_CTL2: 00000000 agp0: AGP_I855_GCC1: 0x50 agp0: AGP_I965_MSAC: 0x00 agp0: Mappable GTT entries: 65536 agp0: Total GTT entries: 524288 random: harvesting attach, 8 bytes (4 bits) from agp0 vgapci0: Boot video device random: harvesting attach, 8 bytes (4 bits) from vgapci0 pci0: <simple comms> at device 22.0 (no driver attached) pci0:0:22:0: Transition from D0 to D3 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xd6608000-0xd66083ff irq 16 at device 26.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 59 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci0: usbpf: Attached random: harvesting attach, 8 bytes (4 bits) from usbus0 random: harvesting attach, 8 bytes (4 bits) from ehci0 hdac0: <Intel 5 Series/3400 Series HDA Controller> mem 0xd6600000-0xd6603fff irq 22 at device 27.0 on pci0 hdac0: PCI card vendor: 0x1179, device: 0xff00 hdac0: HDA Driver Revision: 20120126_0002 hdac0: Config options: on=0x00000000 off=0x00000000 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 264 to local APIC 0 vector 60 hdac0: using IRQ 264 for MSI hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 random: harvesting attach, 8 bytes (4 bits) from hdac0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: Unable to activate hot plug feature. pcib0: allocated type 4 (0x9000-0x9fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xd5e00000-0xd65fffff) for rid 20 of pcib1 pcib0: allocated type 3 (0xd0400000-0xd0bfffff) for rid 24 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 5 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xd5e00000-0xd65fffff pcib1: prefetched decode 0xd0400000-0xd0bfffff pci1: <ACPI PCI bus> on pcib1 pcib1: allocated bus range (1-1) for rid 0 of pci1 pci1: domain=0, physical bus=1 random: harvesting attach, 8 bytes (4 bits) from pci1 random: harvesting attach, 8 bytes (4 bits) from pcib1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pcib2: Unable to activate hot plug feature. pcib0: allocated type 4 (0x7000-0x8fff) for rid 1c of pcib2 pcib0: allocated type 3 (0xd5500000-0xd5dfffff) for rid 20 of pcib2 pcib0: allocated type 3 (0xd0c00000-0xd13fffff) for rid 24 of pcib2 pcib2: domain 0 pcib2: secondary bus 6 pcib2: subordinate bus 10 pcib2: I/O decode 0x7000-0x8fff pcib2: memory decode 0xd5500000-0xd5dfffff pcib2: prefetched decode 0xd0c00000-0xd13fffff pci2: <ACPI PCI bus> on pcib2 pcib2: allocated bus range (6-6) for rid 0 of pci2 pci2: domain=0, physical bus=6 found-> vendor=0x10ec, dev=0x8172, revid=0x10 domain=0, bus=6, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0x7000, size 8, enabled pcib2: allocated I/O port range (0x7000-0x70ff) for rid 10 of pci0:6:0:0 map[14]: type Memory, range 32, base 0xd5500000, size 14, enabled pcib2: allocated memory range (0xd5500000-0xd5503fff) for rid 14 of pci0:6:0:0 pcib2: matched entry for 6.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci2: <network> at device 0.0 (no driver attached) pci0:6:0:0: Transition from D0 to D3 random: harvesting attach, 8 bytes (4 bits) from pci2 random: harvesting attach, 8 bytes (4 bits) from pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: Unable to activate hot plug feature. pcib0: allocated type 4 (0x5000-0x6fff) for rid 1c of pcib3 pcib0: allocated type 3 (0xd4d00000-0xd54fffff) for rid 20 of pcib3 pcib0: allocated type 3 (0xd1400000-0xd1cfffff) for rid 24 of pcib3 pcib3: domain 0 pcib3: secondary bus 11 pcib3: subordinate bus 15 pcib3: I/O decode 0x5000-0x6fff pcib3: memory decode 0xd4d00000-0xd54fffff pcib3: prefetched decode 0xd1400000-0xd1cfffff pci3: <ACPI PCI bus> on pcib3 pcib3: allocated bus range (11-11) for rid 0 of pci3 pci3: domain=0, physical bus=11 found-> vendor=0x10ec, dev=0x8136, revid=0x02 domain=0, bus=11, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x5000, size 8, enabled pcib3: allocated I/O port range (0x5000-0x50ff) for rid 10 of pci0:11:0:0 map[18]: type Prefetchable Memory, range 64, base 0xd1410000, size 12, enabled pcib3: allocated prefetch range (0xd1410000-0xd1410fff) for rid 18 of pci0:11:0:0 map[20]: type Prefetchable Memory, range 64, base 0xd1400000, size 16, enabled pcib3: allocated prefetch range (0xd1400000-0xd140ffff) for rid 20 of pci0:11:0:0 pcib3: matched entry for 11.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 re0: <RealTek 810xE PCIe 10/100baseTX> port 0x5000-0x50ff mem 0xd1410000-0xd1410fff,0xd1400000-0xd140ffff irq 18 at device 0.0 on pci3 re0: MSI count : 1 re0: MSI-X count : 2 re0: attempting to allocate 1 MSI-X vectors (2 supported) msi: routing MSI-X IRQ 265 to local APIC 0 vector 61 re0: using IRQ 265 for MSI-X re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x24800000 re0: MAC rev. 0x00600000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: OUI 0x000004, model 0x0020, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow random: harvesting attach, 8 bytes (4 bits) from rlphy0 random: harvesting attach, 8 bytes (4 bits) from miibus0 re0: Using defaults for TSO: 65518/35/2048 re0: bpf attached re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 random: harvesting attach, 8 bytes (4 bits) from re0 random: harvesting attach, 8 bytes (4 bits) from pci3 random: harvesting attach, 8 bytes (4 bits) from pcib3 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: Unable to activate hot plug feature. pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib4 pcib0: allocated type 3 (0xd4500000-0xd4cfffff) for rid 20 of pcib4 pcib0: allocated type 3 (0xd1d00000-0xd24fffff) for rid 24 of pcib4 pcib4: domain 0 pcib4: secondary bus 16 pcib4: subordinate bus 20 pcib4: I/O decode 0x4000-0x4fff pcib4: memory decode 0xd4500000-0xd4cfffff pcib4: prefetched decode 0xd1d00000-0xd24fffff pci4: <ACPI PCI bus> on pcib4 pcib4: allocated bus range (16-16) for rid 0 of pci4 pci4: domain=0, physical bus=16 random: harvesting attach, 8 bytes (4 bits) from pci4 random: harvesting attach, 8 bytes (4 bits) from pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pcib5: Unable to activate hot plug feature. pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib5 pcib0: allocated type 3 (0xd3d00000-0xd44fffff) for rid 20 of pcib5 pcib0: allocated type 3 (0xd2500000-0xd2cfffff) for rid 24 of pcib5 pcib5: domain 0 pcib5: secondary bus 21 pcib5: subordinate bus 25 pcib5: I/O decode 0x3000-0x3fff pcib5: memory decode 0xd3d00000-0xd44fffff pcib5: prefetched decode 0xd2500000-0xd2cfffff pci5: <ACPI PCI bus> on pcib5 pcib5: allocated bus range (21-21) for rid 0 of pci5 pci5: domain=0, physical bus=21 random: harvesting attach, 8 bytes (4 bits) from pci5 random: harvesting attach, 8 bytes (4 bits) from pcib5 pcib6: <PCI-PCI bridge> irq 17 at device 28.5 on pci0 pcib6: Unable to activate hot plug feature. pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib6 pcib0: allocated type 3 (0xd3500000-0xd3cfffff) for rid 20 of pcib6 pcib0: allocated type 3 (0xd2d00000-0xd34fffff) for rid 24 of pcib6 pcib6: domain 0 pcib6: secondary bus 26 pcib6: subordinate bus 30 pcib6: I/O decode 0x2000-0x2fff pcib6: memory decode 0xd3500000-0xd3cfffff pcib6: prefetched decode 0xd2d00000-0xd34fffff pci6: <PCI bus> on pcib6 pcib6: allocated bus range (26-26) for rid 0 of pci6 pci6: domain=0, physical bus=26 random: harvesting attach, 8 bytes (4 bits) from pci6 random: harvesting attach, 8 bytes (4 bits) from pcib6 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xd6607000-0xd66073ff irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 62 usbus1: EHCI version 1.0 usbus1 on ehci1 ehci1: usbpf: Attached random: harvesting attach, 8 bytes (4 bits) from usbus1 random: harvesting attach, 8 bytes (4 bits) from ehci1 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib7: domain 0 pcib7: secondary bus 31 pcib7: subordinate bus 31 pcib7: special decode subtractive pci7: <ACPI PCI bus> on pcib7 pcib7: allocated bus range (31-31) for rid 0 of pci7 pci7: domain=0, physical bus=31 random: harvesting attach, 8 bytes (4 bits) from pci7 random: harvesting attach, 8 bytes (4 bits) from pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 random: harvesting attach, 8 bytes (4 bits) from isa0 random: harvesting attach, 8 bytes (4 bits) from isab0 atapci0: <Intel 5 Series/3400 Series PCH SATA300 controller> port 0xa078-0xa07f,0xa094-0xa097,0xa070-0xa077,0xa090-0xa093,0xa050-0xa05f,0xa040-0xa04f irq 19 at device 31.2 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 63 ata2: <ATA channel> at channel 0 on atapci0 ata2: SControl registers are not functional: 00000000 random: harvesting attach, 8 bytes (4 bits) from ata2 ata3: <ATA channel> at channel 1 on atapci0 random: harvesting attach, 8 bytes (4 bits) from ata3 random: harvesting attach, 8 bytes (4 bits) from atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel 5 Series/3400 Series PCH SATA300 controller> port 0xa068-0xa06f,0xa08c-0xa08f,0xa060-0xa067,0xa088-0xa08b,0xa030-0xa03f,0xa020-0xa02f irq 19 at device 31.5 on pci0 ata4: <ATA channel> at channel 0 on atapci1 random: harvesting attach, 8 bytes (4 bits) from ata4 ata5: <ATA channel> at channel 1 on atapci1 ata5: SControl registers are not functional: 00000000 random: harvesting attach, 8 bytes (4 bits) from ata5 random: harvesting attach, 8 bytes (4 bits) from atapci1 pci0: <dasp> at device 31.6 (no driver attached) pci0:0:31:6: Transition from D0 to D3 random: harvesting attach, 8 bytes (4 bits) from pci0 random: harvesting attach, 8 bytes (4 bits) from pcib0 acpi_lid0: <Control Method Lid Switch> on acpi0 random: harvesting attach, 8 bytes (4 bits) from acpi_lid0 acpi_button0: <Power Button> on acpi0 random: harvesting attach, 8 bytes (4 bits) from acpi_button0 pcib8: <ACPI Host-PCI bridge> on acpi0 pcib8: decoding 5 range 0xff-0xff pcib8: could not get PCI interrupt routing table for \134_SB_.CPBG - AE_NOT_FOUND pci8: <ACPI PCI bus> on pcib8 pci8: domain=0, physical bus=255 found-> vendor=0x8086, dev=0x2c62, revid=0x02 domain=0, bus=255, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d01, revid=0x02 domain=0, bus=255, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d10, revid=0x02 domain=0, bus=255, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d11, revid=0x02 domain=0, bus=255, slot=2, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d12, revid=0x02 domain=0, bus=255, slot=2, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d13, revid=0x02 domain=0, bus=255, slot=2, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) random: harvesting attach, 8 bytes (4 bits) from hostb1 random: harvesting attach, 8 bytes (4 bits) from hostb2 random: harvesting attach, 8 bytes (4 bits) from hostb3 random: harvesting attach, 8 bytes (4 bits) from hostb4 random: harvesting attach, 8 bytes (4 bits) from hostb5 random: harvesting attach, 8 bytes (4 bits) from hostb6 random: harvesting attach, 8 bytes (4 bits) from pci8 random: harvesting attach, 8 bytes (4 bits) from pcib8 acpi_acad0: <AC Adapter> on acpi0 random: harvesting attach, 8 bytes (4 bits) from acpi_acad0 random: harvesting attach, 8 bytes (4 bits) from atdma0 random: harvesting attach, 8 bytes (4 bits) from fpupnp0 battery0: <ACPI Control Method Battery> on acpi0 random: harvesting attach, 8 bytes (4 bits) from battery0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 64 atkbd0: [GIANT-LOCKED] random: harvesting attach, 8 bytes (4 bits) from atkbd0 psm0: unable to allocate IRQ random: harvesting attach, 8 bytes (4 bits) from atkbdc0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data ffffffff fa 03 psm: status 02 47 17 psm: status 01 c0 b1 psm: status d0 47 31 psm: status 45 80 76 psm: status a4 00 00 psm: status 0a 00 00 psm: status b4 f6 9e psm: status 3b 47 45 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 65 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons psm0: config:00004000, flags:00000008, packet size:6 psm0: syncmask:c0, syncbits:00 random: harvesting attach, 8 bytes (4 bits) from psm0 random: harvesting attach, 8 bytes (4 bits) from psmcpnp0 ACPI: Enabled 7 GPEs in block 00 to 3F random: harvesting attach, 8 bytes (4 bits) from acpi0 random: harvesting attach, 8 bytes (4 bits) from apic0 acpi0: wakeup code va 0xfffffe0111b51000 pa 0x98000 random: harvesting attach, 8 bytes (4 bits) from nexus0 ahc_isa_identify 0: ioport 0xc00 alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 0x9c00 alloc failed ahc_isa_identify 10: ioport 0xac00 alloc failed ahc_isa_identify 11: ioport 0xbc00 alloc failed ahc_isa_identify 12: ioport 0xcc00 alloc failed ahc_isa_identify 13: ioport 0xdc00 alloc failed ahc_isa_identify 14: ioport 0xec00 alloc failed pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0 random: harvesting attach, 8 bytes (4 bits) from orm0 sc0 failed to probe on isa0 vga0 failed to probe on isa0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0 failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices random: harvesting attach, 8 bytes (4 bits) from acpi_perf0 random: harvesting attach, 8 bytes (4 bits) from acpi_perf1 random: harvesting attach, 8 bytes (4 bits) from acpi_perf2 random: harvesting attach, 8 bytes (4 bits) from acpi_perf3 est0: <Enhanced SpeedStep Frequency Control> on cpu0 random: harvesting attach, 8 bytes (4 bits) from cpufreq0 random: harvesting attach, 8 bytes (4 bits) from est0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 random: harvesting attach, 8 bytes (4 bits) from cpufreq1 random: harvesting attach, 8 bytes (4 bits) from est1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 random: harvesting attach, 8 bytes (4 bits) from cpufreq2 random: harvesting attach, 8 bytes (4 bits) from est2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 random: harvesting attach, 8 bytes (4 bits) from cpufreq3 random: harvesting attach, 8 bytes (4 bits) from est3 Device configuration finished. procfs registered ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version: 5 ZFS storage pool version: features support (5000) lapic: Divisor 2, Frequency 66501799 Hz Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 vlan: initialized, using hash tables with chaining lo0: bpf attached IPsec: Initialized Security Association Processing. tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768 hptnr: no controller detected. hptrr: no controller detected. hpt27xx: no controller detected. hdacc0: <Realtek ALC272 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC272 Audio Function Group> at nid 1 on hdacc0 hdaa0: Subsystem ID: 0x1179ff88 hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 hdaa0: GPIO0: disabled hdaa0: GPIO1: disabled hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 19 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 20 99130110 1 0 Speaker Fixed ATAPI Onboard Unknown 1 hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 24 03a11c20 2 0 Mic Jack 1/8 Left Black 12 hdaa0: 25 99a3092f 2 15 Mic Fixed ATAPI Onboard Unknown 9 hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 29 4016892d 2 13 Speaker None Digital 0x00 Purple 9 hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 hdaa0: 33 0321141f 1 15 Headphones Jack 1/8 Left Black 4 hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400 hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 19 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 20 99130110 1 0 Speaker Fixed ATAPI Onboard Unknown 1 hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 23 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 24 03a11c20 2 0 Mic Jack 1/8 Left Black 12 hdaa0: 25 99a3092f 2 15 Mic Fixed ATAPI Onboard Unknown 9 hdaa0: 26 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 27 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA hdaa0: 33 0321141f 1 15 Headphones Jack 1/8 Left Black 4 hdaa0: 2 associations found: hdaa0: Association 0 (1) out: hdaa0: Pin nid=20 seq=0 hdaa0: Pin nid=33 seq=15 hdaa0: Association 1 (2) in: hdaa0: Pin nid=24 seq=0 hdaa0: Pin nid=25 seq=15 hdaa0: Tracing association 0 (1) hdaa0: Pin 20 traced to DAC 2 hdaa0: Pin 33 traced to DAC 2 and hpredir 0 hdaa0: Association 0 (1) trace succeeded hdaa0: Tracing association 1 (2) hdaa0: Pin 24 traced to ADC 8 hdaa0: Pin 25 traced to ADC 8 hdaa0: Association 1 (2) trace succeeded hdaa0: Looking for additional DAC for association 0 (1) hdaa0: Looking for additional ADC for association 1 (2) hdaa0: Tracing input monitor hdaa0: Tracing nid 11 to out hdaa0: nid 11 is input monitor hdaa0: Tracing nid 35 to out hdaa0: Tracing other input monitors hdaa0: Tracing nid 24 to out hdaa0: Tracing nid 25 to out hdaa0: Tracing beeper hdaa0: Headphones redirection for association 0 nid=33 using unsolicited responses. hdaa0: Pin sense: nid=33 sense=0x80000000 (connected) hdaa0: Redirect output to: headphones hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm0: <Realtek ALC272 (Analog 2.0+HP/2.0)> at nid 20,33 and 24,25 on hdaa0 pcm0: Playback: pcm0: Stream cap: 0x00000001 PCM pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz pcm0: DAC: 2 pcm0: pcm0: nid=20 [pin: Speaker (Fixed)] pcm0: + <- nid=12 [audio mixer] [src: pcm, mix] pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: nid=33 [pin: Headphones (Black Jack)] pcm0: + <- nid=12 [audio mixer] [src: pcm, mix] pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: Record: pcm0: Stream cap: 0x00000001 PCM pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz pcm0: ADC: 8 pcm0: pcm0: nid=8 [audio input] pcm0: + <- nid=35 [audio mixer] [src: speaker, mic, mix, monitor] pcm0: + <- nid=24 [pin: Mic (Black Jack)] [src: mic] pcm0: + <- nid=25 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=29 [beep widget] [src: speaker] pcm0: + <- nid=11 [audio mixer] [src: mix] pcm0: pcm0: Input Mix: pcm0: pcm0: nid=11 [audio mixer] pcm0: + <- nid=24 [pin: Mic (Black Jack)] [src: mic] pcm0: + <- nid=25 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=29 [beep widget] [src: speaker] pcm0: pcm0: Master Volume (OSS: vol): -64/0dB pcm0: +- ctl 1 (nid 2 out): -64/0dB (65 steps) pcm0: +- ctl 14 (nid 12 in 0): mute pcm0: +- ctl 15 (nid 12 in 1): mute pcm0: +- ctl 22 (nid 20 in ): mute pcm0: +- ctl 34 (nid 33 in ): mute pcm0: pcm0: PCM Volume (OSS: pcm): -64/0dB pcm0: +- ctl 1 (nid 2 out): -64/0dB (65 steps) pcm0: +- ctl 14 (nid 12 in 0): mute pcm0: pcm0: Microphone Volume (OSS: mic): 0/30dB pcm0: +- ctl 6 (nid 11 in 0): -34/12dB (32 steps) + mute pcm0: +- ctl 27 (nid 24 out): 0/30dB (4 steps) pcm0: +- ctl 45 (nid 35 in 0): mute pcm0: pcm0: Microphone2 Volume (OSS: monitor): 0/30dB pcm0: +- ctl 7 (nid 11 in 1): -34/12dB (32 steps) + mute pcm0: +- ctl 29 (nid 25 out): 0/30dB (4 steps) pcm0: +- ctl 46 (nid 35 in 1): mute pcm0: pcm0: Speaker/Beep Volume (OSS: speaker): -34/12dB pcm0: +- ctl 10 (nid 11 in 4): -34/12dB (32 steps) + mute pcm0: +- ctl 49 (nid 35 in 4): mute pcm0: pcm0: Recording Level (OSS: rec): -16/30dB pcm0: +- ctl 4 (nid 8 in 0): -16/30dB (32 steps) + mute pcm0: +- ctl 45 (nid 35 in 0): mute pcm0: +- ctl 46 (nid 35 in 1): mute pcm0: +- ctl 49 (nid 35 in 4): mute pcm0: +- ctl 53 (nid 35 in 8): mute pcm0: pcm0: Input Mix Level (OSS: mix): -34/12dB pcm0: +- ctl 6 (nid 11 in 0): -34/12dB (32 steps) + mute pcm0: +- ctl 7 (nid 11 in 1): -34/12dB (32 steps) + mute pcm0: +- ctl 10 (nid 11 in 4): -34/12dB (32 steps) + mute pcm0: +- ctl 15 (nid 12 in 1): mute pcm0: +- ctl 53 (nid 35 in 8): mute pcm0: pcm0: Input Monitoring Level (OSS: igain): 0/0dB pcm0: +- ctl 15 (nid 12 in 1): mute pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "mic": pcm0: Mixer "mix": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "monitor": pcm0: Playback channel set is: Front Left, Front Right, pcm0: Playback channel matrix is: 2.0 (connected) pcm0: Automatically set rec source to: monitor pcm0: Recording channel set is: Front Left, Front Right, pcm0: Recording channel matrix is: 2.0 (unknown) random: harvesting attach, 8 bytes (4 bits) from pcm0 random: harvesting attach, 8 bytes (4 bits) from hdaa0 random: harvesting attach, 8 bytes (4 bits) from hdacc0 hdacc1: <Intel Ibex Peak HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Ibex Peak Audio Function Group> at nid 1 on hdacc1 hdaa1: Subsystem ID: 0x1179ff00 hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdaa1: Original pins configuration: hdaa1: nid 0x as seq device conn jack loc color misc hdaa1: 4 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 hdaa1: 5 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa1: 6 58560030 3 0 Digital-out None Digital 0x18 Unknown 0 hdaa1: Patched pins configuration: hdaa1: nid 0x as seq device conn jack loc color misc hdaa1: 4 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 DISA hdaa1: 5 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa1: 6 58560030 3 0 Digital-out None Digital 0x18 Unknown 0 DISA hdaa1: 1 associations found: hdaa1: Association 0 (2) out: hdaa1: Pin nid=5 seq=0 hdaa1: Tracing association 0 (2) hdaa1: Pin 5 traced to DAC 2 hdaa1: Association 0 (2) trace succeeded hdaa1: Looking for additional DAC for association 0 (2) hdaa1: Tracing input monitor hdaa1: Tracing other input monitors hdaa1: Tracing beeper hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm1: <Intel Ibex Peak (HDMI/DP 8ch)> at nid 5 on hdaa1 pcm1: Playback: pcm1: Stream cap: 0x00000005 AC3 PCM pcm1: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm1: DAC: 2 pcm1: pcm1: nid=5 [pin: Digital-out (Jack)] pcm1: + <- nid=2 [audio output] [src: pcm] pcm1: pcm1: Master Volume (OSS: vol): 0/0dB pcm1: +- ctl 2 (nid 5 in ): mute pcm1: pcm1: PCM Volume (OSS: pcm): 0/0dB pcm1: +- ctl 2 (nid 5 in ): mute pcm1: pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: Soft PCM mixer ENABLED pcm1: Playback channel matrix is: unknown, assuming 7.1 (disconnected) random: harvesting attach, 8 bytes (4 bits) from pcm1 random: harvesting attach, 8 bytes (4 bits) from hdaa1 random: harvesting attach, 8 bytes (4 bits) from hdacc1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ata2: SATA reset: ports status=0x00 uhub0: 2 ports with 2 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub0 uhub1: 2 ports with 2 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub1 ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ata3: SATA reset: ports status=0x02 ata3: p0: SATA connect time=0ms status=00000123 ata3: p1: SATA connect timeout status=00000000 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata4: SATA reset: ports status=0x01 ata4: p0: SATA connect time=0ms status=00000113 ata4: reset tp1 mask=01 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0x10000 ata5: SATA reset: ports status=0x00 acpi_acad0: acline initialization start battery0: battery initialization start ada0 at ata3 bus 0 scbus1 target 0 lun 0 ada0: <TOSHIBA MK5065GSX GJ003M> ATA8-ACS SATA 2.x device ada0: [_SERIAL_NUMBER_XXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 476940MB (976773168 512 byte sectors) GEOM: new disk ada0 pass0 at ata3 bus 0 scbus1 target 0 lun 0 pass0: <TOSHIBA MK5065GSX GJ003M> ATA8-ACS SATA 2.x device cd0 at ata4 bus 0 scbus2 target 0 lun 0 cd0: <TSSTcorp CDDVDW TS-L633C TF02> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed pass0: [_SERIAL_NUMBER_XXXXXX] pass0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) pass1 at ata4 bus 0 scbus2 target 0 lun 0 pass1: <TSSTcorp CDDVDW TS-L633C TF02> Removable CD-ROM SCSI device pass1: [_SERIAL_NUMBER_XXXXXXXXXXX] pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) lapic4: CMCI unmasked lapic5: CMCI unmasked SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000100f2 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 4 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 4 vector 49 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 4 vector 50 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48 msi: Assigning MSI-X IRQ 258 to local APIC 4 vector 51 msi: Assigning MSI-X IRQ 259 to local APIC 5 vector 48 msi: Assigning MSI IRQ 264 to local APIC 4 vector 52 SMP: passed TSC synchronization test Timecounter "TSC" frequency 2128055844 Hz quality 1000 Trying to mount root from zfs:tank/ROOT/12.0-CURRENT-up-20170424_155652 []... uhub2: 6 ports with 6 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub2 GEOM: new disk cd0 uhub3: 8 ports with 8 removable, self powered random: harvesting attach, 8 bytes (4 bits) from uhub3 Root mount waiting for: usbus1 usbus0 ugen0.3: <Chicony Electronics Co., Ltd. USB2.0 UVC WebCam> at usbus0 ugen1.3: <Logitech USB Optical Mouse> at usbus1 start_init: trying /sbin/init Linux ELF exec handler installed Linux x86-64 ELF exec handler installed pci0: driver added found-> vendor=0x8086, dev=0x3b64, revid=0x06 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x3b30, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 pci0:0:31:3: reprobing on driver added found-> vendor=0x8086, dev=0x3b32, revid=0x05 domain=0, bus=0, slot=31, func=6 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:31:6: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PCI0.TMRP pci0:0:31:6: Transition from D3 to D0 pci0:0:31:6: Transition from D0 to D3 pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x8172, revid=0x10 domain=0, bus=6, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:6:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX pci0:6:0:0: Transition from D3 to D0 pci0:6:0:0: Transition from D0 to D3 pci3: driver added pci4: driver added pci5: driver added pci6: driver added pci7: driver added pci8: driver added pci0: driver added found-> vendor=0x8086, dev=0x3b64, revid=0x06 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x3b30, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 pci0:0:31:3: reprobing on driver added found-> vendor=0x8086, dev=0x3b32, revid=0x05 domain=0, bus=0, slot=31, func=6 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:31:6: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PCI0.TMRP pci0:0:31:6: Transition from D3 to D0 pci0:0:31:6: Transition from D0 to D3 pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x8172, revid=0x10 domain=0, bus=6, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:6:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX pci0:6:0:0: Transition from D3 to D0 pci0:6:0:0: Transition from D0 to D3 pci3: driver added pci4: driver added pci5: driver added pci6: driver added pci7: driver added pci8: driver added firmware: 'runfw' version 1: 8192 bytes loaded at 0xffffffff827160a8 pci0: driver added found-> vendor=0x8086, dev=0x3b64, revid=0x06 domain=0, bus=0, slot=22, func=0 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D3 MSI supports 1 message, 64 bit pci0:0:22:0: reprobing on driver added pci0:0:22:0: Transition from D3 to D0 pci0:0:22:0: Transition from D0 to D3 found-> vendor=0x8086, dev=0x3b30, revid=0x05 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 pci0:0:31:3: reprobing on driver added found-> vendor=0x8086, dev=0x3b32, revid=0x05 domain=0, bus=0, slot=31, func=6 class=11-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 powerspec 3 supports D0 D3 current D3 MSI supports 1 message pci0:0:31:6: reprobing on driver added pci0: set ACPI power state D0 on \134_SB_.PCI0.TMRP pci0:0:31:6: Transition from D3 to D0 pci0:0:31:6: Transition from D0 to D3 pci1: driver added pci2: driver added found-> vendor=0x10ec, dev=0x8172, revid=0x10 domain=0, bus=6, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 3 supports D0 D1 D2 D3 current D3 MSI supports 1 message, 64 bit pci0:6:0:0: reprobing on driver added pci2: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX pci0:6:0:0: Transition from D3 to D0 pci0:6:0:0: Transition from D0 to D3 pci3: driver added pci4: driver added pci5: driver added pci6: driver added pci7: driver added pci8: driver added Cuse v0.1.34 @ /dev/cuse linsysfs registered firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff827a60b0 firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff827d50b0 firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff828280b0 firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff8287c0b0 firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff828cf0b0 firmware: 'iwn6000g2afw' version 0: 677296 bytes loaded at 0xffffffff8293f0b8 firmware: 'iwn6000g2bfw' version 0: 679436 bytes loaded at 0xffffffff829e50b8 firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff82a8c0b0 acpi_video0: <ACPI video extension> on vgapci0 random: harvesting attach, 8 bytes (4 bits) from acpi_video0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ums0 on uhub3 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 3> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 random: harvesting attach, 8 bytes (4 bits) from ums0 debugfs registered [drm] Initialized drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Memory usable by graphics device = 2048M [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Connector LVDS-1: get mode from tunables: [drm] - kern.vt.fb.modes.LVDS-1 [drm] - kern.vt.fb.default_mode [drm] Connector VGA-1: get mode from tunables: [drm] - kern.vt.fb.modes.VGA-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] RC6 disabled, disabling runtime PM support [drm] Initialized i915 1.6.0 20160919 for drmn on minor 0 random: harvesting attach, 8 bytes (4 bits) from drmn0 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=11 height=768 width=1366 depth=32 cmsize=16 size=4227072 pbase=0xc0046000 vbase=0xfffff800c0046000 name=drmn0 flags=0x0 stride=5504 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device GEOM_ELI: Device label/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software linprocfs registered hdac0: poll interval 1000 -> 500 ticks ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled re0: link state changed to DOWN re0: link state changed to UP battery0: battery initialization failed, giving up hdac0: poll interval 500 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 5 ticks hdac0: poll interval 5 -> 500 ticks