Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-06-09 08:31:45
From: ryo
Description: NetBSD/evbarm on digi CC-WMX6UL-START
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.1 (IMX6UL_STARTER) #1: Fri Jun 9 17:19:48 JST 2017
ryo@moveq:/usr/src/sys/arch/evbarm/compile/IMX6UL_STARTER
total memory = 256 MB
avail memory = 246 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
mainbus0 (root)
cpu0 at mainbus0 core 0: 792 MHz Cortex-A7 r0p5 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB/32B 2-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 128KB/64B 8-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
armperiph0 at mainbus0
armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (151 valid)
armgic0: 32 Priorities, 128 SPIs, 7 PPIs, 16 SGIs
armgtmr0 at armperiph0: ARMv7 Generic 64-bit Timer (8000 kHz)
armgtmr0: interrupting on irq 27
timecounter: Timecounter "armgtmr0" frequency 8000000 Hz quality 500
axi0 at mainbus0: Advanced eXtensible Interface
imxccm0 at axi0 addr 0x20c4000: Clock Control Module
imxccm0: PLL_ARM clock=792000000
imxccm0: PLL_SYS clock=528000000
imxccm0: PLL_USB1 clock=480000000
imxccm0: PLL_USB2 clock=480000000
imxccm0: PLL_AUDIO clock=36000000
imxccm0: PLL_VIDEO clock=72000000
imxccm0: PLL_ENET clock=50000000
imxccm0: PLL_MLB clock=480000000
imxccm0: IMX6CLK_PLL2_PFD0=352000000
imxccm0: IMX6CLK_PLL2_PFD1=594000000
imxccm0: IMX6CLK_PLL2_PFD2=396000000
imxccm0: IMX6CLK_PLL3_PFD0=720000000
imxccm0: IMX6CLK_PLL3_PFD1=540000000
imxccm0: IMX6CLK_PLL3_PFD2=508235294
imxccm0: IMX6CLK_PLL3_PFD3=454736842
imxccm0: IMX6CLK_ARM_ROOT=396000000
imxccm0: IMX6CLK_PERIPH=396000000
imxccm0: IMX6CLK_AHB=132000000
imxccm0: IMX6CLK_IPG=66000000
imxccm0: IMX6CLK_AXI=198000000
imxccm0: IMX6CLK_USDHC1=198000000
imxccm0: IMX6CLK_USDHC2=198000000
imxccm0: IMX6CLK_USDHC3=99000000
imxccm0: IMX6CLK_USDHC4=99000000
imxocotp0 at axi0 addr 0x21bc000: On-Chip OTP Controller
imxocotp0: OCOTP_VERSION 6.0.0
imxgpio0 at axi0 addr 0x209c000 intr 98 irqbase 256: interrupts 256..287
imxgpio1 at axi0 addr 0x20a0000 intr 100 irqbase 288: interrupts 288..319
imxgpio2 at axi0 addr 0x20a4000 intr 102 irqbase 320: interrupts 320..351
imxgpio3 at axi0 addr 0x20a8000 intr 104 irqbase 352: interrupts 352..383
imxgpio4 at axi0 addr 0x20ac000 intr 106 irqbase 384: interrupts 384..415
imxiomux0 at axi0 addr 0x20e0000: IOMUX Controller
imxuart4 at axi0 addr 0x21f4000 intr 62
imxuart4: console
imxwdog0 at axi0 addr 0x20bc000 intr 112: i.MX Watchdog Timer, default period is 10 seconds
enet0 at axi0 addr 0x2188000 intr 150: Gigabit Ethernet Controller
enet0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at enet0 phy 0: OUI 0x00800f, model 0x000f, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
imxusbc0 at axi0 addr 0x2184000: Universal Serial Bus Controller
ehci0 at imxusbc0 unit 0 intr 75: i.MX USB Controller
ehci0: id=5 revision=161 HCI revision=0x100
ehci0: 1 host port, device capable, 8 endpoints
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ehci1 at imxusbc0 unit 1 intr 74: i.MX USB Controller
ehci1: id=5 revision=161 HCI revision=0x100
ehci1: 1 host port, device capable, 8 endpoints
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
imxsnvs0 at axi0 addr 0x20cc000: Secure Non-Volatile Storage
imxsnvs0: id=0x3e, ver=1.3, ip_era=0x5, intg_opt=0x0, eco_rev=0x0, config_opt=0x0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
gpio0 at imxgpio0: 32 pins
gpio1 at imxgpio1: 32 pins
gpio2 at imxgpio2: 32 pins
gpio3 at imxgpio3: 32 pins
gpio4 at imxgpio4: 32 pins
uhub0 at usb0: i.MX (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: i.MX (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
boot device: <unknown>
root device: enet0
dump device:
file system (default generic):
root on enet0
nfs_boot: trying static
nfs_boot: client_addr=172.28.4.94
nfs_boot: gateway=172.28.4.40
nfs_boot: netmask=255.255.0.0
nfs_boot: server=172.28.4.40
nfs_boot: root=172.28.4.40:/src/boot/imx6ul
root on[_IP_XXXXXX]:/src/boot/imx6ul
root file system type: nfs
kern.module.path=/stand/evbarm/8.99.1/modules
init path (default /sbin/init):
init: trying /sbin/init