Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-07-02 00:48:03
From: jcharbs
Description: Lenovo ThinkServer TS140
# dmesg
Copyright (c) 2003-2017 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v4.8.0-RELEASE #4: Sun Mar 26 20:55:22 EDT 2017
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/home/justin/release/4_8/sys/X86_64_GENERIC
i8254 clock: 1193193 Hz
TSC invariant clock: 3491936520 Hz
CPU: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz (3491.94-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306c3 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x77dafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<GSFSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID>
Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 4075235328 (3886 MB)
avail memory = 3748065280 (3574 MB)
lapic: divisor index 0, frequency 49884621 Hz
srat_probe: can't locate SRAT
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 109123016, shift 5
VMM: VMX is disabled by the BIOS
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
interrupt uses mplock: swi_taskq
ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000D473D0A0 0000BC (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: FACP 0x00000000D47549D8 00010C (v05 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: DSDT 0x00000000D473D1E8 0177EE (v02 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: FACS 0x00000000D549FF80 000040
ACPI: APIC 0x00000000D4754AE8 000072 (v03 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: FPDT 0x00000000D4754B60 000044 (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: FIDT 0x00000000D4754BA8 00009C (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: TCPA 0x00000000D4754C48 000032 (v02 LENOVO TC-FB 00001B70 MSFT 01000013)
ACPI: DBGP 0x00000000D4754C80 000034 (v01 LENOVO TC-FB 00001B70 MSFT 00000005)
ACPI: LUFT 0x00000000D4754CB8 0329E2 (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: SSDT 0x00000000D47876A0 000539 (v01 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: SSDT 0x00000000D4787BE0 000AD8 (v01 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: MCFG 0x00000000D47886B8 00003C (v01 LENOVO TC-FB 00001B70 MSFT 00000097)
ACPI: HPET 0x00000000D47886F8 000038 (v01 LENOVO TC-FB 00001B70 AMI. 00000005)
ACPI: SSDT 0x00000000D4788730 00036D (v01 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: SSDT 0x00000000D4788AA0 003528 (v01 LENOVO TC-FB 00001B70 INTL 20091112)
ACPI: ASF! 0x00000000D478BFC8 0000A5 (v32 LENOVO TC-FB 00001B70 TFSM 000F4240)
ACPI: EINJ 0x00000000D478C070 000130 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: ERST 0x00000000D478C1A0 000230 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: HEST 0x00000000D478C3D0 0000A8 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: BERT 0x00000000D478C478 000030 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: BGRT 0x00000000D478C4A8 000038 (v00 LENOVO TC-FB 00001B70 AMI 00010013)
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
acpi0: <LENOVO TC-FB> on motherboard
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
coremctl0: <Intel i3/i5/i7 Haswell memory controller> on hostb0
coremctl0: CAP DDR3 1600 ECC
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xe0000000-0xefffffff,0xf7800000-0xf7bfffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x0c0c) at device 3.0 irq 16
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq 16
sio0: configured irq 19 not in bitmap of probed irqs 0
sio0: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d3e000-0xf7d3efff irq 19 at device 22.3 on pci0
sio0: moving to sio4
sio4: type 16550A
usbus0: 5.0Gbps Super Speed USB v3.0
em0: <Intel(R) PRO/1000 Network Connection PCH_LPT_I217_LM 7.4.2> port 0xf080-0xf09f mem 0xf7d3d000-0xf7d3dfff,0xf7d00000-0xf7d1ffff irq 20 at device 25.0 on pci0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
em0: MAC address: [_MAC_XXXXXXXXXX]
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 17 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x8c20) at device 27.0 irq 22
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 9287> mem 0xf7c00000-0xf7c0ffff irq 17 at device 0.0 on pci2
usbus1: 480Mbps High Speed USB v2.0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9287 mac 384.2 RF5133 phy 15.15
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0xf060-0xf07f,0xf0a0-0xf0a3,0xf0b0-0xf0b7,0xf0c0-0xf0c3,0xf0d0-0xf0d7 mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ahci0: AHCI 1.3 cap 0xc730ff44<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 5 ports, 32 tags/port, gen 3 (6Gbps)
uhub0: 21 ports with 21 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x13ba> at usbus0
ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 1> on usbus0
kbd2 at ukbd0
ums0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 1> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ahci0.0: Found DISK "WDC WD10EZEX-08WN4A0 01.01A01" serial="WD-WCC6Y4XK4SZJ"
ahci0.0: tags=32/32 satacap=9d0e satacap2=0006 satafea=0044 NCQ=YES capacity=953869.71MB
ahci0.0: f85=3469 f86=bc01 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.1: Found SSD "PNY CS1311 120GB SSD CS131122" serial="PNY161621761601025B3"
ahci0.1: tags=32/32 satacap=e70e satacap2=0006 satafea=004c NCQ=YES capacity=114473.46MB
ahci0.1: f85=7469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=frozen
ahci0.2: Found SSD "SanDisk SDSSDA120G Z32080RL" serial="163905479413"
ahci0.2: tags=32/32 satacap=850e satacap2=0086 satafea=014c NCQ=YES capacity=114473.46MB
ahci0.2: f85=3469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=frozen
ahci0.3: Found SSD "KINGSTON SUV400S37120G 0C3J96R9" serial="50026B7771011821"
ahci0.3: tags=32/32 satacap=e70e satacap2=0006 satafea=00cc NCQ=YES capacity=114473.46MB
ahci0.3: f85=7069 f86=b401 f87=4167 WC=enabled RA=enabled SEC=frozen
ahci0.4: Found ATAPI "HL-DT-ST DVD-RAM GHC0N MA01" serial="K3EG19I4849"
ahci0.4: tags=0/32 satacap=0402 satacap2=0000 satafea=0060 NCQ=NO capacity=1.00MB
ahci0.4: f85=4250 f86=0000 f87=4100 WC=notsupp RA=notsupp SEC=notsupp
ahci0.4: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
ahci0.4: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 31.3 irq 18
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFF810FD78800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFF810EE0FC80 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFF804EB99800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 5 GPEs in block 00 to 3F
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 5 busses
ahci0.4: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
ahci0.4: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA WDC WD10EZEX-08W 01.0> Fixed Direct Access SCSI-4 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da1 at ahci0 bus 1 target 0 lun 0
da1: <SATA PNY CS1311 120GB CS13> Fixed Direct Access SCSI-4 device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ahci0.4: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
da1: 600.000MB/s transfers
da1: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
da1: supports TRIM
da2 at ahci0 bus 2 target 0 lun 0
da2: <SATA SanDisk SDSSDA12 Z320> Fixed Direct Access SCSI-4 device
da2: [_SERIAL_NUMBER_XXXXXXXXX]
da2: 600.000MB/s transfers
da2: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
da2: supports TRIM
cd0 at ahci0 bus 4 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GHC0N MA01> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da3 at ahci0 bus 3 target 0 lun 0
da3: <SATA KINGSTON SUV400S 0C3J> Fixed Direct Access SCSI-4 device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
da3: supports TRIM
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/163905479413.s1d
HAMMER(ROOT) recovery check seqno=00173745
HAMMER(ROOT) recovery range 300000000c558ed0-300000000c558ed0
HAMMER(ROOT) recovery nexto 300000000c558ed0 endseqno=00173746
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 10576k, remaining available: 131072k
Mounting devfs
HAMMER(BUILD) recovery check seqno=00103afd
HAMMER(BUILD) recovery range 300000000064da60-300000000064da60
HAMMER(BUILD) recovery nexto 300000000064da60 endseqno=00103afe
HAMMER(BUILD) mounted clean, no recovery needed
swap low/high-water marks set to 83883/125825
[drm] Initialized drm 1.1.0 20060810
drm0 on vgapci0
[drm] pdev: vendor=0x8086 device=0x041e rev=0x06
[drm] svendor=0x17aa sdevice=0x30a5 irq=16
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x41e, 0x10) = 0x400000
WARN_ON(domain->wake_count == 0)_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x41e, 0x18) = 0x10000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x41e, 0x10) = 0x400000
[drm] Memory usable by graphics device = 2048M
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
tunable drm.video.VGA-1 is not set
tunable drm.video.DP-1 is not set
tunable drm.video.HDMI-A-1 is not set
tunable drm.video.DP-2 is not set
tunable drm.video.HDMI-A-2 is not set
drm0: taking over the fictitious range 0xe0000000-0xf0000000
kms console: xpixels 1360 ypixels 768
drm: not enough stolen space for compressed buffer (need 4177920 more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.
[drm] Initialized i915 1.6.0 20160229
hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0
hdac0: link ctrl 0x800
hdac0: disable nosnoop
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0
hdac1: link ctrl 0x800
hdac1: disable nosnoop
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
pcm1: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1
error: [drm:pid1101:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
error: [drm:pid1101:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
pid 1218 (midori), uid 1001: exited on signal 11 (core dumped)
pid 1248 (midori), uid 1001: exited on signal 11 (core dumped)
error: [drm:pid1101:intel_pipe_update_start] *ERROR* Potential atomic update failure on pipe A
boot() called on cpu#0
Waiting (max 60 seconds) for system thread swapcached to stop...stopped
Waiting (max 60 seconds) for system thread vnlru to stop...stopped
Waiting (max 60 seconds) for system thread consttyd to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon_hw to stop...stopped
Waiting (max 60 seconds) for system thread bufdaemon to stop...stopped
syncing disks...
done
vflush: Warning, cannot destroy busy device vnode
unmount of filesystem mounted from devfs failed (BUSY)
unmount(0xffffff810a8a3180): Forced unmount: 0 namecache references still present
unmount(0xffffff810a8a3180): Forced unmount: 1 mount refs still present
Copyright (c) 2003-2017 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v4.8.0-RELEASE #4: Sun Mar 26 20:55:22 EDT 2017
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/home/justin/release/4_8/sys/X86_64_GENERIC
i8254 clock: 1193188 Hz
TSC invariant clock: 3491940652 Hz
CPU: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz (3491.94-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306c3 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x77dafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,AVX,F16C,RDRND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<GSFSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID>
Thermal and PM Features=0x75<SENSOR,ARAT,PLN,ECMD,PTM>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 4075235328 (3886 MB)
avail memory = 3747278848 (3573 MB)
lapic: divisor index 0, frequency 49884629 Hz
srat_probe: can't locate SRAT
Initialize MI interrupts
TSC testing MP synchronization ...
TSC is MP synchronized
TSC: cputimer freq 109123145, shift 5
VMM: VMX is disabled by the BIOS
wdog: In-kernel automatic watchdog reset enabled
kbd1 at kbdmux0
md0: Malloc disk
interrupt uses mplock: swi_taskq
ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000D473D0A0 0000BC (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: FACP 0x00000000D47549D8 00010C (v05 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: DSDT 0x00000000D473D1E8 0177EE (v02 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: FACS 0x00000000D549FF80 000040
ACPI: APIC 0x00000000D4754AE8 000072 (v03 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: FPDT 0x00000000D4754B60 000044 (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: FIDT 0x00000000D4754BA8 00009C (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: TCPA 0x00000000D4754C48 000032 (v02 LENOVO TC-FB 00001B70 MSFT 01000013)
ACPI: DBGP 0x00000000D4754C80 000034 (v01 LENOVO TC-FB 00001B70 MSFT 00000005)
ACPI: LUFT 0x00000000D4754CB8 0329E2 (v01 LENOVO TC-FB 00001B70 AMI 00010013)
ACPI: SSDT 0x00000000D47876A0 000539 (v01 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: SSDT 0x00000000D4787BE0 000AD8 (v01 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: MCFG 0x00000000D47886B8 00003C (v01 LENOVO TC-FB 00001B70 MSFT 00000097)
ACPI: HPET 0x00000000D47886F8 000038 (v01 LENOVO TC-FB 00001B70 AMI. 00000005)
ACPI: SSDT 0x00000000D4788730 00036D (v01 LENOVO TC-FB 00001B70 INTL 20120711)
ACPI: SSDT 0x00000000D4788AA0 003528 (v01 LENOVO TC-FB 00001B70 INTL 20091112)
ACPI: ASF! 0x00000000D478BFC8 0000A5 (v32 LENOVO TC-FB 00001B70 TFSM 000F4240)
ACPI: EINJ 0x00000000D478C070 000130 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: ERST 0x00000000D478C1A0 000230 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: HEST 0x00000000D478C3D0 0000A8 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: BERT 0x00000000D478C478 000030 (v01 LENOVO TC-FB 00001B70 00000000)
ACPI: BGRT 0x00000000D478C4A8 000038 (v00 LENOVO TC-FB 00001B70 AMI 00010013)
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
rdrand0: <RdRand RNG> on motherboard
acpi0: <LENOVO TC-FB> on motherboard
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi_timer0 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: frequency 14318180
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
coremctl0: <Intel i3/i5/i7 Haswell memory controller> on hostb0
coremctl0: CAP DDR3 1600 ECC
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xe0000000-0xefffffff,0xf7800000-0xf7bfffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0
hdac0: link ctrl 0x800
hdac0: disable nosnoop
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> (vendor 0x8086, dev 0x8c3a) at device 22.0 irq 16
sio0: configured irq 19 not in bitmap of probed irqs 0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms, UART> (vendor 0x8086, dev 0x8c3d) at device 22.3 irq 19
em0: <Intel(R) PRO/1000 Network Connection PCH_LPT_I217_LM 7.4.2> port 0xf080-0xf09f mem 0xf7d3d000-0xf7d3dfff,0xf7d00000-0xf7d1ffff irq 20 at device 25.0 on pci0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
em0: MAC address: [_MAC_XXXXXXXXXX]
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 17 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0
hdac1: link ctrl 0x800
hdac1: disable nosnoop
usbus1: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 9287> mem 0xf7c00000-0xf7c0ffff irq 17 at device 0.0 on pci2
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9287 mac 384.2 RF5133 phy 15.15
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI-PCI-SATA> port 0xf060-0xf07f,0xf0a0-0xf0a3,0xf0b0-0xf0b7,0xf0c0-0xf0c3,0xf0d0-0xf0d7 mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ahci0: AHCI 1.3 cap 0xc730ff44<S64A,NCQ,SALP,SAL,SCLO,PMD,SSC,PSC,EMS> cap2 0x4<APST>, 5 ports, 32 tags/port, gen 3 (6Gbps)
uhub0: 21 ports with 21 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x13ba> at usbus0
ukbd0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 1> on usbus0
kbd2 at ukbd0
ums0: <vendor 0x13ba Barcode Reader, class 0/0, rev 1.10/0.01, addr 1> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ahci0.0: Found DISK "WDC WD10EZEX-08WN4A0 01.01A01" serial="WD-WCC6Y4XK4SZJ"
ahci0.0: tags=32/32 satacap=9d0e satacap2=0006 satafea=0044 NCQ=YES capacity=953869.71MB
ahci0.0: f85=3469 f86=bc01 f87=6123 WC=enabled RA=enabled SEC=frozen
ahci0.1: Found SSD "PNY CS1311 120GB SSD CS131122" serial="PNY161621761601025B3"
ahci0.1: tags=32/32 satacap=e70e satacap2=0006 satafea=004c NCQ=YES capacity=114473.46MB
ahci0.1: f85=7469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=frozen
ahci0.2: Found SSD "SanDisk SDSSDA120G Z32080RL" serial="163905479413"
ahci0.2: tags=32/32 satacap=850e satacap2=0086 satafea=014c NCQ=YES capacity=114473.46MB
ahci0.2: f85=3469 f86=bc09 f87=4163 WC=enabled RA=enabled SEC=frozen
ahci0.3: Found SSD "KINGSTON SUV400S37120G 0C3J96R9" serial="50026B7771011821"
ahci0.3: tags=32/32 satacap=e70e satacap2=0006 satafea=00cc NCQ=YES capacity=114473.46MB
ahci0.3: f85=7069 f86=b401 f87=4167 WC=enabled RA=enabled SEC=frozen
ahci0.4: Found ATAPI "HL-DT-ST DVD-RAM GHC0N MA01" serial="K3EG19I4849"
ahci0.4: tags=0/32 satacap=0402 satacap2=0000 satafea=0060 NCQ=NO capacity=1.00MB
ahci0.4: f85=4250 f86=0000 f87=4100 WC=notsupp RA=notsupp SEC=notsupp
ahci0.4: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
ahci0.4: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x8c22) at device 31.3 irq 18
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFF810FD7E000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
cpu_cst0: <ACPI CPU C-State> on cpu0
cpu_pst0: <ACPI CPU P-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
perfbias0: <CPU perf-energy bias> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFF810EDF7480 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFF804EB99800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
cpu_cst1: <ACPI CPU C-State> on cpu1
cpu_pst1: <ACPI CPU P-State> on cpu1
clockmod1: <CPU clock modulation> on cpu1
perfbias1: <CPU perf-energy bias> on cpu1
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu_cst2: <ACPI CPU C-State> on cpu2
cpu_pst2: <ACPI CPU P-State> on cpu2
clockmod2: <CPU clock modulation> on cpu2
perfbias2: <CPU perf-energy bias> on cpu2
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
cpu_cst3: <ACPI CPU C-State> on cpu3
cpu_pst3: <ACPI CPU P-State> on cpu3
clockmod3: <CPU clock modulation> on cpu3
perfbias3: <CPU perf-energy bias> on cpu3
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ACPI: Enabled 5 GPEs in block 00 to 3F
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x500 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio2: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1
CAM: Configuring 5 busses
ahci0.4: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
ahci0.4: TFES RFIS-34 flg=40 st=51 err=54 dev=40 off=0/1536
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA WDC WD10EZEX-08W 01.0> Fixed Direct Access SCSI-4 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da1 at ahci0 bus 1 target 0 lun 0
da1: <SATA PNY CS1311 120GB CS13> Fixed Direct Access SCSI-4 device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
da1: supports TRIM
ahci0.4: TFES RFIS-34 flg=40 st=51 err=20 dev=40 off=0/1536
da2 at ahci0 bus 2 target 0 lun 0
da2: <SATA SanDisk SDSSDA12 Z320> Fixed Direct Access SCSI-4 device
da2: [_SERIAL_NUMBER_XXXXXXXXX]
da2: 600.000MB/s transfers
da2: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
da2: supports TRIM
da3 at ahci0 bus 3 target 0 lun 0
da3: <SATA KINGSTON SUV400S 0C3J> Fixed Direct Access SCSI-4 device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
da3: supports TRIM
cd0 at ahci0 bus 4 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GHC0N MA01> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
no B_DEVMAGIC (bootdev=0)
Mounting root from hammer:serno/163905479413.s1d
HAMMER(ROOT) recovery check seqno=001a448b
HAMMER(ROOT) recovery range 30000000118a70d0-30000000118a70d0
HAMMER(ROOT) recovery nexto 30000000118a70d0 endseqno=001a448c
HAMMER(ROOT) mounted clean, no recovery needed
DMA space used: 11344k, remaining available: 131072k
Mounting devfs
HAMMER(BUILD) recovery check seqno=001053b1
HAMMER(BUILD) recovery range 30000000008fd320-30000000008fd320
HAMMER(BUILD) recovery nexto 30000000008fd320 endseqno=001053b2
HAMMER(BUILD) mounted clean, no recovery needed
swap low/high-water marks set to 83883/125825
[drm] Initialized drm 1.1.0 20060810
drm0 on vgapci0
[drm] pdev: vendor=0x8086 device=0x041e rev=0x06
[drm] svendor=0x17aa sdevice=0x30a5 irq=18
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x41e, 0x10) = 0x400000
WARN_ON(domain->wake_count == 0)_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x41e, 0x18) = 0x10000000
_pci_get_rle: dinfo was NULL, trying again with parent
pci_resource_len(0x41e, 0x10) = 0x400000
[drm] Memory usable by graphics device = 2048M
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
tunable drm.video.VGA-1 is not set
tunable drm.video.DP-1 is not set
tunable drm.video.HDMI-A-1 is not set
tunable drm.video.DP-2 is not set
tunable drm.video.HDMI-A-2 is not set
drm0: taking over the fictitious range 0xe0000000-0xf0000000
kms console: xpixels 1360 ypixels 768
drm: not enough stolen space for compressed buffer (need 4177920 more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.
[drm] Initialized i915 1.6.0 20160229
#