Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-08-03 14:14:54
From: msaitoh
Description: UP board amd64-current
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.1 (GENERIC) #9: Thu Aug 3 23:05:07 JST 2017
[_EMAIL_XXXXXXXXXXXXXX]:/disk/sources/NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 3492 MB
avail memory = 3360 MB
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
RTC BIOS diagnostic error 0x3f<config_unit,memory_size,fixed_disk,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 5ba07f18
AAEON UP-CHT01 (V1.0)
mainbus0 (root)
ACPI: RSDP 0x000000005B160000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005B1600A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005B176238 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000005B1601F8 016039 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000005B74EF80 000040
ACPI: APIC 0x000000005B176348 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000005B1763D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005B176418 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000005B1764B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000005B1764F8 0041C5 (v01 DptfTb DptfTab 00001000 INTL 20120913)
ACPI: SSDT 0x000000005B17A6C0 000654 (v01 CpuDpf CpuDptf 00001000 INTL 20120913)
ACPI: SSDT 0x000000005B17AD18 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913)
ACPI: UEFI 0x000000005B17AD70 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: HPET 0x000000005B17ADB8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x000000005B17ADF0 000763 (v01 PmRef CpuPm 00003000 INTL 20120913)
ACPI: SSDT 0x000000005B17B558 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120913)
ACPI: SSDT 0x000000005B17B7E8 00017A (v01 PmRef ApTst 00003000 INTL 20120913)
ACPI: SSDT 0x000000005B17B968 00043A (v01 Intel_ Tpm2Tabl 00001000 INTL 20120913)
ACPI: TPM2 0x000000005B17BDA8 000034 (v03 00000000 00000000)
ACPI: LPIT 0x000000005B17BDE0 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D)
ACPI: BCFG 0x000000005B17BEE8 000139 (v01 INTEL BATTCONF 00000001 INTL 00000000)
ACPI: PRAM 0x000000005B17C028 000030 (v01 00000001 00000000)
ACPI: CSRT 0x000000005B17C058 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D)
ACPI: WDAT 0x000000005B17C1A8 000104 (v01 00000000 00000000)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 115 pins
cpu0 at mainbus0 apid 0
timecounter: Timecounter "lapic" frequency 80082698 Hz quality -100
cpu0: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz, id 0x406c4
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz, id 0x406c4
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz, id 0x406c4
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz, id 0x406c4
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
acpi0: invalid PCI address for D00B
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE401063CE810 00059C (v01 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4017E6D1810 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4017E74AC10 00015F (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE401063E7C98 00008D (v01 PmRef ApCst 00003000 INTL 20120913)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout0: brightness levels: [1-100]
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [1-100]
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout2: brightness levels: [1-100]
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout3: brightness levels: [1-100]
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout4: brightness levels: [1-100]
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout5: brightness levels: [1-100]
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout6: brightness levels: [1-100]
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout7: brightness levels: [1-100]
acpiout8 at acpivga0 (ISP0, 0x22b8): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0: 0x22b8 (acpiout8): Unknown Output Device, head 0, non vga
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
IURT (PNP0501) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
PEPD (INT33A4) at acpi0 not configured
PWM1 (80862288) at acpi0 not configured
ADC0 (ADC081C) at acpi0 not configured
PMI2 (INT33F5) at acpi0 not configured
HAD0 (HAD022A8) at acpi0 not configured
SPRC (PNP0C02) at acpi0 not configured
HIDD (INT33D5) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
GPO0 (INT33FF) at acpi0 not configured
GPO1 (INT33FF) at acpi0 not configured
GPO2 (INT33FF) at acpi0 not configured
GPO3 (INT33FF) at acpi0 not configured
GPO4 (INT33FF) at acpi0 not configured
MBID (INT33BD) at acpi0 not configured
PAGD (ACPI000C) at acpi0 not configured
STR0 (INT3403) at acpi0 not configured
CTPM (MSFT0101) at acpi0 not configured
acpitz0 at acpi0 (TZ00)
acpitz0: levels: critical 90.0 C, passive cooling
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2280 (rev. 0x36)
genfb0 at pci0 dev 2 function 0: vendor 8086 product 22b0 (rev. 0x36)
genfb0: framebuffer at 0xa0000000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
sdhc0 at pci0 dev 16 function 0: vendor 8086 product 2294 (rev. 0x36)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 1 idt entry 97
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 3.0, rev 16, SDMA, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1 (128s timer), 512 byte blocks
sdmmc0 at sdhc0 slot 0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 22b5 (rev. 0x36)
allocated pic msi0 type edge pin 0 level 6 to cpu0 slot 16 idt entry 98
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 22a8 (audio multimedia, revision 0x36) at pci0 dev 21 function 0 not configured
vendor 8086 product 22b7 (USB serial bus, device, revision 0x36) at pci0 dev 22 function 0 not configured
vendor 8086 product 22c0 (DMA system, EISA, revision 0x36) at pci0 dev 24 function 0 not configured
vendor 8086 product 22c1 (miscellaneous serial bus, revision 0x36) at pci0 dev 24 function 1 not configured
vendor 8086 product 22c2 (miscellaneous serial bus, revision 0x36) at pci0 dev 24 function 2 not configured
vendor 8086 product 22c3 (miscellaneous serial bus, revision 0x36) at pci0 dev 24 function 3 not configured
vendor 8086 product 22c5 (miscellaneous serial bus, revision 0x36) at pci0 dev 24 function 5 not configured
vendor 8086 product 22c6 (miscellaneous serial bus, revision 0x36) at pci0 dev 24 function 6 not configured
vendor 8086 product 22c7 (miscellaneous serial bus, revision 0x36) at pci0 dev 24 function 7 not configured
vendor 8086 product 2298 (miscellaneous crypto, revision 0x36) at pci0 dev 26 function 0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 22c8 (rev. 0x36)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
allocated pic msi1 type edge pin 0 level 6 to cpu0 slot 17 idt entry 99
re0: interrupting at msi1 vec 0
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
vendor 8086 product 2286 (DMA system, EISA, revision 0x36) at pci0 dev 30 function 0 not configured
vendor 8086 product 2289 (miscellaneous serial bus, revision 0x36) at pci0 dev 30 function 2 not configured
vendor 8086 product 228a (miscellaneous communications, revision 0x36) at pci0 dev 30 function 3 not configured
vendor 8086 product 2290 (miscellaneous serial bus, revision 0x36) at pci0 dev 30 function 6 not configured
pcib0 at pci0 dev 31 function 0: vendor 8086 product 229c (rev. 0x36)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
allocated pic ioapic0 type edge pin 4 level 8 to cpu0 slot 2 idt entry 129
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1441 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 2000 mW, 1440 MHz
acpicpu0: P2: FFH, lat 10 us, pow 1883 mW, 1360 MHz
acpicpu0: P3: FFH, lat 10 us, pow 1766 mW, 1280 MHz
acpicpu0: P4: FFH, lat 10 us, pow 1650 mW, 1200 MHz
acpicpu0: P5: FFH, lat 10 us, pow 1533 mW, 1120 MHz
acpicpu0: P6: FFH, lat 10 us, pow 1416 mW, 1040 MHz
acpicpu0: P7: FFH, lat 10 us, pow 1300 mW, 960 MHz
acpicpu0: P8: FFH, lat 10 us, pow 1183 mW, 880 MHz
acpicpu0: P9: FFH, lat 10 us, pow 1066 mW, 800 MHz
acpicpu0: P10: FFH, lat 10 us, pow 950 mW, 720 MHz
acpicpu0: P11: FFH, lat 10 us, pow 833 mW, 640 MHz
acpicpu0: P12: FFH, lat 10 us, pow 716 mW, 560 MHz
acpicpu0: P13: FFH, lat 10 us, pow 600 mW, 480 MHz
acpicpu0: T0: FFH, lat 1 us, pow 600 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 525 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 450 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 375 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 300 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 225 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 150 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 75 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=90
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=90
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1440228960 Hz quality 3000
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 7 ports with 7 removable, self powered
IPsec: Initialized Security Association Processing.
sdhc0: timeout waiting for mask 0x3 value 0 (state=0x1fff0a06)
sdhc0: command or data phase inhibited
sdhc0: tuning did not complete, using fixed sampling clock
sdmmc0: can't execute MMC tuning
sdmmc0: mem init failed
ld0 at sdmmc0: <0x70:0x0100:M52564:0x00:0x0e700ab3:0x000>
ld0: 59648 MB, 7604 cyl, 255 head, 63 sec, 512 bytes/sect x 122159104 sectors
ld0: GPT GUID: d141d9a6-0461-40bd-8eb8-e87fdd53a93e
dk0 at ld0: "d1c38348-e156-4a17-831c-0c24aeca8159", 2048 blocks at 2048, type: <unknown>
dk1 at ld0: "EFI System Partition", 98304 blocks at 4096, type: msdos
dk2 at ld0: "5d94a1bc-0076-4bcc-9d21-eedd5df273dc", 122054656 blocks at 102400, type: <unknown>
ld0: 4-bit width, HS200, 200.000 MHz
axe0 at uhub1 port 2
axe0: vendor 0b95 (0xb95) product 7720 (0x7720), rev 2.00/0.01, addr 1
axe0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at axe0 phy 16: OUI 0x007063, model 0x0006, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1
uhidev1: vendor 04d9 (0x4d9) USB Keyboard (0x1818), rev 1.10/1.01, addr 2, iclass 3/1
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: SanDisk (0x781) Extreme (0x558b), rev 2.10/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Extreme, 1.00> disk removable
sd0: 59840 MB, 65535 cyl, 16 head, 63 sec, 512 bytes/sect x 122552320 sectors
sd0: GPT GUID: b61b84a5-dbe6-49e5-9610-9a10be586b5b
dk3 at sd0: "EFI System", 65536 blocks at 34, type: msdos
dk4 at sd0: "amd64-current", 122486717 blocks at 65570, type: ffs
uhub2 at uhub1 port 7: vendor 0424 (0x424) product 4603 (0x4603), class 9/0, rev 2.01/1.82, addr 4
uhub2: multiple transaction translators
uhub2: 4 ports with 3 removable, self powered
uhidev2 at uhub2 port 1 configuration 1 interface 0
uhidev2: Darfon (0xd62) USB Optical Mouse (0xa100), rev 1.10/3.00, addr 5, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
ugen0 at uhub2 port 4
ugen0: vendor 0424 (0x424) Bridge device (0x2530), rev 2.00/1.16, addr 6
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
WARNING: 12 errors while detecting hardware; check system log.
boot device: sd0
root on dk4
root file system type: ffs
kern.module.path=/stand/amd64/8.99.1/modules
clock: unknown CMOS layout