Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-08-03 17:47:02
From: Kapper1224
Description: NetBSDi386 7.1 on CF-U1(ATOM Z530)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.1 (GENERIC.201703111743Z) total memory = 2037 MB avail memory = 1987 MB kern.module.path=/stand/i386/7.1/modules timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Panasonic Corporation CF-U1GQGXG2M (002) mainbus0 (root) ACPI: RSDP 0xf03b0 000024 (v02 MATBIO) ACPI: XSDT 0x7f5e4f10 00006C (v01 MATBIO CFU1-2 06222004 MSFT 00010013) ACPI: FACP 0x7f5e3c10 0000F4 (v04 MATBIO CFU1-2 06222004 MSFT 00010013) ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0x7F5E8E40/0x000000007F5E8D40, using 64-bit address (20131218/tbfadt-299) ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20131218/tbfadt-634) ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x00000000000009F4/0x0 (20131218/tbfadt-664) ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-716) ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20131218/tbfadt-716) ACPI: DSDT 0x7f5d9010 0091FC (v01 MATBIO CFU1-2 00000000 INTL 20061109) ACPI: FACS 0x7f5e8d40 000040 ACPI: APIC 0x7f5e5e90 00005C (v02 MATBIO CFU1-2 06222004 MSFT 00010013) ACPI: MCFG 0x7f5e5e10 00003C (v01 A M I OEMMCFG 06222004 MSFT 00000097) ACPI: HPET 0x7f5e5d90 000038 (v01 A M I OEMHPET 06222004 AMI. 00000003) ACPI: SLIC 0x7f5d1e10 000176 (v01 MATBIO CFU1-2 06222004 AMI 00010013) ACPI: SSDT 0x7f5aba10 0004CE (v02 PmRef CpuPm 00003000 INTL 20061109) ACPI: SSDT 0x7f5d1c10 00018C (v02 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 0x7f5abf10 0000A0 (v02 PmRef Cpu1Tst 00003000 INTL 20061109) ACPI: TCPA 0x7f5e5d10 000032 (v02 MATBIO CFU1-2 00000001 MSFT 01000013) ACPI: All ACPI Tables successfully acquired ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz, id 0x106c2 cpu1 at mainbus0 apid 1: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz, id 0x106c2 acpi0 at mainbus0: Intel ACPICA 20131218 acpi0: X/RSDT: OemId , AslId ACPI: SSDT 0x7f5adc90 000239 (v02 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 0x0 000239 (v02 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 0x7f5ac710 0006AB (v02 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT 0x0 0006AB (v02 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI: SSDT 0x7f5adf10 0000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 0x0 0000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 0x7f5e8b10 000083 (v02 PmRef Cpu1Cst 00003000 INTL 20061109) ACPI: SSDT 0x0 000083 (v02 PmRef Cpu1Cst 00003000 INTL 20061109) acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpiec0 at acpi0 (EC0, PNP0C09) : io 0x62,0x66 MCH (PNP0C02) at acpi0 not configured SIO1 (PNP0C02) at acpi0 not configured pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 FWH (INT0800) at acpi0 not configured RMSC (PNP0C02) at acpi0 not configured COPR (PNP0C04) at acpi0 not configured PMSC (PNP0C02) at acpi0 not configured ICH (PNP0C02) at acpi0 not configured acpivga0 at acpi0 (GFX0): ACPI Display Adapter acpiout0 at acpivga0 (DD01, 0x0120): ACPI Display Output Device acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device acpiout1: brightness levels: 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 acpivga0: connected output devices: acpivga0: 0x0120 (acpiout0): VGA Analog Monitor, index 0, port 2, head 0, bios detect acpivga0: 0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect CMC (PNP0C02) at acpi0 not configured RMEM (PNP0C02) at acpi0 not configured MISC (MAT0021) at acpi0 not configured HKEY (MAT0019) at acpi0 not configured acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery acpibat0: Panasonic LION rechargeable battery acpibat0: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh acpibat1 at acpi0 (BAT2, PNP0C0A-1): ACPI Battery acpibat1: Panasonic LION rechargeable battery acpibat1: granularity: low->warn 0.010 Wh, warn->full 0.010 Wh acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button acpitz0 at acpi0 (TZ00): cpu0 cpu1 acpitz0: levels: critical 97.0 C, passive 80.0 C, passive cooling OMSC (PNP0C02) at acpi0 not configured acpiwmi0 at acpi0 (UMD0, PNP0C14-0): ACPI WMI Interface acpiwmibus at acpiwmi0 not configured acpiwmi1 at acpi0 (UMD3, PNP0C14-3): ACPI WMI Interface acpiwmibus at acpiwmi1 not configured acpiwmi2 at acpi0 (UMD4, PNP0C14-4): ACPI WMI Interface acpiwmibus at acpiwmi2 not configured acpiwmi3 at acpi0 (UMD5, PNP0C14-5): ACPI WMI Interface acpiwmibus at acpiwmi3 not configured acpiwmi4 at acpi0 (UMD6, PNP0C14-6): ACPI WMI Interface acpiwmibus at acpiwmi4 not configured acpiwmi5 at acpi0 (UMD7, PNP0C14-7): ACPI WMI Interface acpiwmibus at acpiwmi5 not configured acpiwmi6 at acpi0 (DTMS, PNP0C14-10): ACPI WMI Interface acpiwmibus at acpiwmi6 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 2 GPEs in block 00 to 1F ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646) pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x8100 (rev. 0x06) vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x8108 (rev. 0x06) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 drm at vga0 not configured hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 16 hdafg0 at hdaudio0: ADI AD1883 hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack] hdafg0: ADC01 2ch: Mic In [Jack] hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: full duplex, playback, capture, mmap, independent ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x8110 (rev. 0x06) ppb0: PCI Express capability version 1 x1 @ 2.5GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok iwn0 at pci1 dev 0 function 0: vendor 0x8086 product 0x4232 (rev. 0x00) iwn0: interrupting at ioapic0 pin 16 iwn0: MIMO 1T2R, MoW, address [_MAC_XXXXXXXXXX] iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x8114 (rev. 0x06) uhci0: interrupting at ioapic0 pin 16 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x8115 (rev. 0x06) uhci1: interrupting at ioapic0 pin 17 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x8116 (rev. 0x06) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x8117 (rev. 0x06) ehci0: interrupting at ioapic0 pin 19 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 sdhc0 at pci0 dev 30 function 0: vendor 0x8086 product 0x811c (rev. 0x06) sdhc0: interrupting at ioapic0 pin 16 sdhc0: SD Host Specification 1.0, rev.255 sdhc0: using DMA transfer sdmmc0 at sdhc0 slot 0 pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x8119 (rev. 0x06) schide0 at pci0 dev 31 function 1: Intel SCH IDE Controller (rev. 0x06) schide0: bus-master DMA support present schide0: primary channel wired to compatibility mode schide0: primary channel interrupting at ioapic0 pin 14 atabus0 at schide0 channel 0 isa0 at pcib0 tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10 isapnp0 at isa0 port 0x279 isapnp0: no ISA Plug 'n Play devices found acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1600 MHz acpicpu0: P1: FFH, lat 10 us, pow 1533 mW, 1333 MHz acpicpu0: P2: FFH, lat 10 us, pow 1066 mW, 1067 MHz acpicpu0: P3: FFH, lat 10 us, pow 600 mW, 800 MHz acpicpu0: T0: FFH, lat 1 us, pow 600 mW, 100 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100 acpicpu1 at cpu1: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter online. uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered IPsec: Initialized Security Association Processing. ugen0 at uhub3 port 5 ugen0: Qualcomm Incorporated Qualcomm Gobi 2000, rev 2.00/0.02, addr 2 wd0 at atabus0 drive 0 wd0: wd0: drive supports 1-sector PIO transfers, LBA addressing wd0: 61064 MB, 132337 cyl, 15 head, 63 sec, 512 bytes/sect x 125059072 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(schide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) Kernelized RAIDframe activated boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: Fujitsu Component USB Touch Panel, rev 1.10/50.01, addr 2, iclass 3/1 uts0 at uhidev0wsmouse0 at uts0 mux 0 iwn0: scan request(1) while scanning(0) ignored wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) uhidev1 at uhub0 port 1 configuration 1 interface 0 uhidev1: vendor 0x0101 USB OPTICAL MOUSE, rev 1.10/1.00, addr 3, iclass 3/1 ums0 at uhidev1: 5 buttons, W and Z dirs wsmouse1 at ums0 mux 0