Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2017-09-08 21:33:57
From: bodems
Description: OpenBSD 6.1 on bhyve
OpenBSD 6.1 (RAMDISK_CD) #19: Sat Apr  1 13:49:18 MDT 2017
    xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 520093696 (496MB)
avail mem = 500637696 (477MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf101f (9 entries)
bios0: vendor BHYVE version "1.00" date 03/14/2014
bios0: bhyve BHYVE
acpi0 at bios0: rev 2
acpi0: tables DSDT APIC FACP HPET MCFG
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, 2133.42 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,PBE,SSE3,PCLMUL,DTES64,DS-CPL,SSSE3,CX16,xTPR,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,HV,NXE,PAGE1GB,LONG,LAHF,ITSC,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2133424080 Hz
cpu0: apic clock running at 134MHz
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PC00)
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
pvbus0 at mainbus0: bhyve
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 unknown vendor 0x1275 product 0x1275 rev 0x00
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
ahci0 at pci0 dev 2 function 0 "Intel 82801H AHCI" rev 0x00: apic 0 int 16, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, BHYVE SATA DISK, 001> SCSI3 0/direct fixed t10.ATA_BHYVE_SATA_DISK_BHYVE-8946-3110-BC63
sd0: 10240MB, 512 bytes/sector, 20971520 sectors, thin
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address xx:xx:xx:xx:xx:xx
virtio0: msix shared
ahci1 at pci0 dev 4 function 0 "Intel 82801H AHCI" rev 0x00: apic 0 int 18, AHCI 1.3
ahci1: port 0: 6.0Gb/s
scsibus1 at ahci1: 32 targets
cd0 at scsibus1 targ 0 lun 0: <BHYVE, BHYVE DVD-ROM, 001> ATAPI 5/cdrom removable
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 6.1 (GENERIC) #19: Sat Apr  1 13:42:46 MDT 2017
    xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 520093696 (496MB)
avail mem = 500629504 (477MB)
warning: no entropy supplied by boot loader
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf101f (9 entries)
bios0: vendor BHYVE version "1.00" date 03/14/2014
bios0: bhyve BHYVE
acpi0 at bios0: rev 2
acpi0: sleep states S5
acpi0: tables DSDT APIC FACP HPET MCFG
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz, 2133.46 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,HTT,PBE,SSE3,PCLMUL,DTES64,DS-CPL,SSSE3,CX16,xTPR,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,HV,NXE,PAGE1GB,LONG,LAHF,ITSC,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2133462640 Hz
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 134MHz
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 10000000 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PC00)
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
pvbus0 at mainbus0: bhyve
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 unknown vendor 0x1275 product 0x1275 rev 0x00
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
ahci0 at pci0 dev 2 function 0 "Intel 82801H AHCI" rev 0x00: apic 0 int 16, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, BHYVE SATA DISK, 001> SCSI3 0/direct fixed t10.ATA_BHYVE_SATA_DISK_BHYVE-8946-3110-BC63
sd0: 10240MB, 512 bytes/sector, 20971520 sectors, thin
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address xx:xx:xx:xx:xx:xx
virtio0: msix shared
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
/dev/ksyms: Symbol table not valid.
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (9e88f302ab44d75e.a) swap on sd0b dump on sd0b