Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-09-22 19:16:41
From: vermaden
Description: ThinkPad T420s
Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.1-RELEASE-p1 #0: Wed Aug 9 11:55:48 UTC 2017 [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0) VT(vga): resolution 640x480 info: [drm] Initialized drm 1.1.0 20060810 CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (2491.96-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8143052800 (7765 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-8C > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1245980900 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard acpi0: <LENOVO TP-8C> on motherboard acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 drmn0: <Intel SandyBridge (M)> on vgapci0 info: [drm] Memory usable by graphics device = 2048M info: [drm] MTRR allocation failed. Graphics performance may suffer. intel_iicbb0 on drmn0 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iicbus1: <Philips I2C bus> on intel_gmbus0 iic1: <I2C generic I/O> on iicbus1 intel_iicbb1 on drmn0 iicbus2: <Philips I2C bus> on iicbb1 addr 0xff iic2: <I2C generic I/O> on iicbus2 iicbus3: <Philips I2C bus> on intel_gmbus1 iic3: <I2C generic I/O> on iicbus3 intel_iicbb2 on drmn0 iicbus4: <Philips I2C bus> on iicbb2 addr 0xff iic4: <I2C generic I/O> on iicbus4 iicbus5: <Philips I2C bus> on intel_gmbus2 iic5: <I2C generic I/O> on iicbus5 intel_iicbb3 on drmn0 iicbus6: <Philips I2C bus> on iicbb3 addr 0xff iic6: <I2C generic I/O> on iicbus6 iicbus7: <Philips I2C bus> on intel_gmbus3 iic7: <I2C generic I/O> on iicbus7 intel_iicbb4 on drmn0 iicbus8: <Philips I2C bus> on iicbb4 addr 0xff iic8: <I2C generic I/O> on iicbus8 iicbus9: <Philips I2C bus> on intel_gmbus4 iic9: <I2C generic I/O> on iicbus9 intel_iicbb5 on drmn0 iicbus10: <Philips I2C bus> on iicbb5 addr 0xff iic10: <I2C generic I/O> on iicbus10 iicbus11: <Philips I2C bus> on intel_gmbus5 iic11: <I2C generic I/O> on iicbus11 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. drmn0: taking over the fictitious range 0xe0000000-0xf0000000 info: [drm] Connector LVDS-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.LVDS-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 vgapci0: Boot video device pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x4080-0x409f mem 0xf1600000-0xf161ffff,0xf162b000-0xf162bfff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: xx:xx:xx:xx:xx:xx em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf162a000-0xf162a3ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac0: <Intel Cougar Point HDA Controller> mem 0xf1620000-0xf1623fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci1: <ACPI PCI bus> on pcib2 iwn0: <Intel Centrino Ultimate-N 6300> mem 0xf1500000-0xf1501fff irq 17 at device 0.0 on pci1 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib3: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib3 sdhci_pci0: <RICOH R5CE823 SD> mem 0xf0d00000-0xf0d000ff irq 19 at device 0.0 on pci2 sdhci_pci0: 1 slot(s) allocated pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib4 xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xf0c00000-0xf0c01fff irq 16 at device 0.0 on pci3 xhci0: 32 bytes context size, 32-bit DMA xhci0: Unable to map MSI-X table usbus1 on xhci0 usbus1: 5.0Gbps Super Speed USB v3.0 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf1629000-0xf16293ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0x40a8-0x40af,0x40b4-0x40b7,0x40a0-0x40a7,0x40b0-0x40b3,0x4060-0x407f mem 0xf1628000-0xf16287ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 4.000 msec nvme cam probe device init hdacc0: <Conexant CX20590 HDA CODEC> at cad 0 on hdac0 hdaa0: <Conexant CX20590 Audio Function Group> at nid 1 on hdacc0 pcm0: <Conexant CX20590 (Analog)> at nid 31 and 27 on hdaa0 pcm1: <Conexant CX20590 (Analog)> at nid 25 and 35 on hdaa0 ugen1.1: <0x1033 XHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Corsair Neutron XT SSD SAFC02.3> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 457862MB (937703088 512 byte sectors) Trying to mount root from zfs:sys/ROOT/default []... Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 4 ports with 4 removable, self powered info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off Root mount waiting for: usbus2 usbus0 uhub1: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub4 on uhub2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Root mount waiting for: usbus2 usbus0 uhub4: 6 ports with 6 removable, self powered Root mount waiting for: usbus2 usbus0 uhub3: 8 ports with 8 removable, self powered ugen0.3: <vendor 0x17ef Lenovo USB Receiver> at usbus0 ukbd0 on uhub4 ukbd0: <vendor 0x17ef Lenovo USB Receiver, class 0/0, rev 2.00/1.22, addr 3> on usbus0 kbd2 at ukbd0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 ichsmb0: <Intel Cougar Point SMBus controller> port 0xefa0-0xefbf mem 0xf1624000-0xf16240ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 ums0 on uhub4 ums0: <vendor 0x17ef Lenovo USB Receiver, class 0/0, rev 2.00/1.22, addr 3> on usbus0 ums0: 5 buttons and [XYZT] coordinates ID=0 uhid0 on uhub4 uhid0: <vendor 0x17ef Lenovo USB Receiver, class 0/0, rev 2.00/1.22, addr 3> on usbus0