Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2017-10-01 02:44:26
From: afresh1
Description: OpenBSD 6.2 (GENERIC) sparc64 on Sun SUNW,UltraAX-i2
OpenBSD 6.2 (GENERIC) #289: Sat Sep 30 13:17:43 MDT 2017
    xxx@xxx.xxx:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1038925824 (990MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Fire V100 (UltraSPARC-IIe 500MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 500 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map 60000000-7fffffff
pci0 at psycho0
ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus0 addr 0-ffff ivec 0x2a not configured
rtc0 at ebus0 addr 70-71: m5819
power0 at ebus0 addr 2000-2007 ivec 0x23
lom0 at ebus0 addr 8010-8011 ivec 0x2a: LOMlite2 rev 3.11
com0 at ebus0 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
"flashprom" at ebus0 addr 0-7ffff not configured
alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x54: 256MB SDRAM registered ECC PC133CL2
spdmem1 at iic0 addr 0x55: 256MB SDRAM registered ECC PC133CL2
spdmem2 at iic0 addr 0x56: 256MB SDRAM registered ECC PC133CL2
spdmem3 at iic0 addr 0x57: 256MB SDRAM registered ECC PC133CL2
dc0 at pci0 dev 12 function 0 "Davicom DM9102" rev 0x31: ivec 0x7c6, address xx:xx:xx:xx:xx:xx
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0
dc1 at pci0 dev 5 function 0 "Davicom DM9102" rev 0x31: ivec 0x7dc, address xx:xx:xx:xx:xx:xx
amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7e4, version 1.0, legacy support
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <WDC WD200EB-11CPF0>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E, 1.7A> ATAPI 5/cdrom removable
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
umass0 at uhub0 port 2 configuration 1 interface 0 "vendor 0x0930 USB Flash Memory" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <, USB Flash Memory, PMAP> SCSI0 0/direct removable serial.09306545BA4113DC06DA
sd0: 3822MB, 512 bytes/sector, 7827456 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1f,0/ide@d,0/disk@2,0
root on wd0a (dd0db020358950d8.a) swap on wd0b dump on wd0b