Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-10-14 23:54:18
From: Sevan / Venture37
Description: Thinkpad X61s 7666-34G without ultrabay attached
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.4 (GENERIC) #1: Sat Oct 14 20:24:08 BST 2017
:/usr/obj/i386-obj/sys/arch/i386/compile/GENERIC
total memory = 3062 MB
avail memory = 2992 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 766634G (ThinkPad X61s)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6950 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BF6BD1B7 00009C (v01 LENOVO TP-7V 00002220 LTP 00000000)
ACPI: FACP 0x00000000BF6BD300 0000F4 (v03 LENOVO TP-7V 00002220 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170831/tbfadt-642)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20170831/tbfadt-693)
ACPI: DSDT 0x00000000BF6BD6DB 00E35D (v01 LENOVO TP-7V 00002220 MSFT 03000000)
ACPI: FACS 0x00000000BF6E4000 000040
ACPI: SSDT 0x00000000BF6BD4B4 000227 (v01 LENOVO TP-7V 00002220 MSFT 03000000)
ACPI: ECDT 0x00000000BF6CBA38 000052 (v01 LENOVO TP-7V 00002220 LNVO 00000001)
ACPI: TCPA 0x00000000BF6CBA8A 000032 (v02 LENOVO TP-7V 00002220 LNVO 00000001)
ACPI: APIC 0x00000000BF6CBABC 000068 (v01 LENOVO TP-7V 00002220 LNVO 00000001)
ACPI: MCFG 0x00000000BF6CBB24 00003C (v01 LENOVO TP-7V 00002220 LNVO 00000001)
ACPI: HPET 0x00000000BF6CBB60 000038 (v01 LENOVO TP-7V 00002220 LNVO 00000001)
ACPI: SLIC 0x00000000BF6CBB98 000176 (v01 LENOVO TP-7V 00002220 SLIC 00000000)
ACPI: SLAC 0x00000000BF6CBDF0 000176 (v01 LENOVO TP-7V 00002220 LTP 00000000)
ACPI: BOOT 0x00000000BF6CBF66 000028 (v01 LENOVO TP-7V 00002220 LTP 00000001)
ACPI: ASF! 0x00000000BF6CBF8E 000072 (v16 LENOVO TP-7V 00002220 PTL 00000001)
ACPI: SSDT 0x00000000BF6E2697 00025F (v01 LENOVO TP-7V 00002220 INTL 20050513)
ACPI: SSDT 0x00000000BF6E28F6 0000A6 (v01 LENOVO TP-7V 00002220 INTL 20050513)
ACPI: SSDT 0x00000000BF6E299C 0004F7 (v01 LENOVO TP-7V 00002220 INTL 20050513)
ACPI: SSDT 0x00000000BF6E2E93 0001D8 (v01 LENOVO TP-7V 00002220 INTL 20050513)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz, id 0x6fb
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz, id 0x6fb
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20170831
acpi0: X/RSDT: OemId <LENOVO,TP-7V ,00002220>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4C1E94C 000282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4C6F00C 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4A8863C 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4C2FD3C 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FPU (PNP0C04) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0: 0x0300 (acpiout2): Unknown Output Device, head 0
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 3 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Failed to initialize an ALPS device.
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a00 (rev. 0x0c)
agp0 at pchb0: i965-family chipset
agp0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2a02 (rev. 0x0c)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xdc41a000, size 1024x768, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 2a03 (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller (rev. 0x03)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address 00:1d:72:
wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 11d4 product 1984
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 283f (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 2841 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ral0 at pci2 dev 0 function 0: vendor 1814 product 0781 (rev. 0x00)
ral0: interrupting at ioapic0 pin 17
ral0: 802.11 address 00:15:af:
ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R)
uhci2 at pci0 dev 29 function 0: vendor 8086 product 2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 8086 product 2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: 2 companion controllers, 2 ports each: uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xf3)
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled
cbb0 at pci3 dev 0 function 0: vendor 1180 product 0476 (rev. 0xba)
fwohci0 at pci3 dev 0 function 1: vendor 1180 product 0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1d:72:ff:
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
sdhc0 at pci3 dev 0 function 2: vendor 1180 product 0822 (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SDHC 1.0, rev 4, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 6
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2811 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2829 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xe720ff82<CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x32031114 rev 0x9
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 1601 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 1600 MHz
acpicpu0: P2: FFH, lat 10 us, pow 16000 mW, 1200 MHz
acpicpu0: P3: FFH, lat 10 us, pow 14000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 14000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 12250 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 10500 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8750 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 7000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5250 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3500 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1750 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
DRM error in i965_irq_handler: pipe A underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ehci0: handing over full speed device on port 2 to uhci0
wd0 at atabus1 drive 0
wd0: <SanDisk SDSSDP064G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 61057 MB, 124053 cyl, 16 head, 63 sec, 512 bytes/sect x 125045424 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/8.99.4/modules
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
gpiosim0: simulating 64 pins
gpio0 at gpiosim0: 64 pins
WARNING: ZFS on NetBSD is under development
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
ugen0 at uhub0 port 2
ugen0: STMicroelectronics (0x483) Biometric Coprocessor (0x2016), rev 1.00/0.01, addr 2