Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2017-10-22 18:49:49
From: Sevan / Venture37
Description: iEi IMBA-9454G-R40 motherboard, Areca ARC-1882IX-24 controller
Table 'FACP' at 0x3fea0200
Table 'APIC' at 0x3fea0390
APIC: Found table at 0x3fea0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
Table 'FACP' at 0x3fea0200
Table 'APIC' at 0x3fea0390
Table 'MCFG' at 0x3fea0400
Table 'OEMB' at 0x3feae040
Table 'SSDT' at 0x3feae640
ACPI: No SRAT table found
PPIM 0: PA=0xa0000, VA=0xffffffff82610000, size=0x10000, mode=0
VT(vga): resolution 640x480
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8248d000.
Preloaded /boot/entropy "/boot/entropy" at 0xffffffff8248dd58.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff8248dda8.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff8248e610.
Calibrating TSC clock ... TSC clock: 2666818600 Hz
CPU: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz (2666.82-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: (disabled in BIOS) Basic Features=0x1a0400<SMM>
Pin-Based Controls=0x1f<ExtINT,NMI>
Primary Processor Controls=0x77b9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,MOV-DR,IO,IOmap,MSRmap,MONITOR,PAUSE>
Exit Controls=0x1a0400<PAT-LD,EFER-SV>
Entry Controls=0x1a0400
TSC: P-state invariant, performance statistics
Instruction TLB: 2M pages, 4-way, 8 entries or 4M pages, 4-way, 4 entries
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
64-Byte prefetching
Data TLB0: 4 KByte pages, 4-way associative, 16 entries
Data TLB0: 4 MByte pages, 4-way set associative, 16 entries
2nd-level cache: 4 MByte, 16-way set associative, 64 byte line size1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB1: 4 KByte pages, 4-way associative, 256 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
real memory = 1073741824 (1024 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x00000000024d5000 - 0x000000003e4dffff, 1006678016 bytes (245771 pages)
avail memory = 992911360 (946 MB)
Event timer "LAPIC" quality 100
LAPIC: ipi_wait() us multiplier 65 (r 4100170 tsc 2666818600)
ACPI APIC Table: <080111 APIC1347>
Package ID shift: 1
L2 cache ID shift: 1
L1 cache ID shift: 0
Core ID shift: 0
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
Package HW ID = 0 (0)
Core HW ID = 0 (0)
CPU0 (BSP): APIC ID: 0 (0)
Core HW ID = 1 (0x1)
CPU1 (AP): APIC ID: 1 (0x1)
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe003c59d000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
Pentium Pro MTRR support enabled
random: read 4096 bytes from preloaded cache
random: unblocking device.
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0x00000000000F98C0 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000003FEA0000 000038 (v01 080111 RSDT1347 20110801 MSFT 00000097)
ACPI: FACP 0x000000003FEA0200 000084 (v01 080111 FACP1347 20110801 MSFT 00000097)
ACPI: DSDT 0x000000003FEA0440 005A6D (v01 B188M B188MR16 00000001 INTL 20051117)
ACPI: FACS 0x000000003FEAE000 000040
ACPI: APIC 0x000000003FEA0390 00006C (v01 080111 APIC1347 20110801 MSFT 00000097)
ACPI: MCFG 0x000000003FEA0400 00003C (v01 080111 OEMMCFG 20110801 MSFT 00000097)
ACPI: OEMB 0x000000003FEAE040 000075 (v01 080111 OEMB1347 20110801 MSFT 00000097)
ACPI: SSDT 0x000000003FEAE640 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: ver 0x20 maxredir 0x17
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
TSC timecounter disables C2 and C3.
SMP: passed TSC synchronization test
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1333409300 Hz quality 1000
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: entropy device external interface
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
crypto: <crypto core>
netmap: loaded module
null: <full device, null device, zero device>
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19
io: <I/O>
hptnr: R750/DC7280 controller driver v1.1.4
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hpt27xx: RocketRAID 27xx controller driver v1.2.7
nexus0
vtvga0: <VT VGA driver> on motherboard
random: harvesting attach, 8 bytes (4 bits) from vtvga0
random: harvesting attach, 8 bytes (4 bits) from ram0
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
acpi0: <080111 RSDT1347> on motherboard
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 2 ACPI AML tables successfully acquired and loaded
PCIe: Memory Mapped configuration base @ 0xf0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource2
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource3
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource4
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource5
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource6
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource7
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fe00000 (3) failed
cpu0: Processor \134_PR_.P001 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80003582800 0002B9 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
cpu0: switching to generic Cx mode
random: harvesting attach, 8 bytes (4 bits) from cpu0
cpu1: Processor \134_PR_.P002 (ACPI ID 2) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF8000320EC00 0002B9 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
random: harvesting attach, 8 bytes (4 bits) from cpu1
ACPI: Processor \134_PR_.P003 (ACPI ID 3) ignored
ACPI: Processor \134_PR_.P004 (ACPI ID 4) ignored
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 1 vector 48
Event timer "i8254" frequency 1193182 Hz quality 100
random: harvesting attach, 8 bytes (4 bits) from attimer0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
Event timer "RTC" frequency 32768 Hz quality 0
random: harvesting attach, 8 bytes (4 bits) from atrtc0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_timer0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link0
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link1
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link2
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link3
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link4
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link5
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link6
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link7
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pcib0: decoding 5 range 0-0xff
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xdffff
pcib0: decoding 3 range 0x3ff00000-0xefffffff
pcib0: decoding 3 range 0xf4000000-0xffffffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2770, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2771, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
secbus=1, subbus=1
found-> vendor=0x8086, dev=0x2772, revid=0x02
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xcfc80000, size 19, enabled
pcib0: allocated type 3 (0xcfc80000-0xcfcfffff) for rid 10 of pci0:0:2:0
map[14]: type I/O Port, range 32, base 0xec00, size 3, enabled
pcib0: allocated type 4 (0xec00-0xec07) for rid 14 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled
pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 18 of pci0:0:2:0
map[1c]: type Memory, range 32, base 0xcfc40000, size 18, enabled
pcib0: allocated type 3 (0xcfc40000-0xcfc7ffff) for rid 1c of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27d0, revid=0x01
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
secbus=2, subbus=2
found-> vendor=0x8086, dev=0x27d2, revid=0x01
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
secbus=3, subbus=3
found-> vendor=0x8086, dev=0x27c8, revid=0x01
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0xe000, size 5, enabled
pcib0: allocated type 4 (0xe000-0xe01f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27c9, revid=0x01
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0xdc00, size 5, enabled
pcib0: allocated type 4 (0xdc00-0xdc1f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27ca, revid=0x01
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled
pcib0: allocated type 4 (0xd880-0xd89f) for rid 20 of pci0:0:29:2
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27cb, revid=0x01
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled
pcib0: allocated type 4 (0xd800-0xd81f) for rid 20 of pci0:0:29:3
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27cc, revid=0x01
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xcfc3fc00, size 10, enabled
pcib0: allocated type 3 (0xcfc3fc00-0xcfc3ffff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xe1
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=4, subbus=4
found-> vendor=0x8086, dev=0x27de, revid=0x01
domain=0, bus=0, slot=30, func=2
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xd400, size 8, enabled
pcib0: allocated type 4 (0xd400-0xd4ff) for rid 10 of pci0:0:30:2
map[14]: type I/O Port, range 32, base 0xd080, size 6, enabled
pcib0: allocated type 4 (0xd080-0xd0bf) for rid 14 of pci0:0:30:2
map[18]: type Memory, range 32, base 0xcfc3f800, size 9, enabled
pcib0: allocated type 3 (0xcfc3f800-0xcfc3f9ff) for rid 18 of pci0:0:30:2
map[1c]: type Memory, range 32, base 0xcfc3f400, size 8, enabled
pcib0: allocated type 3 (0xcfc3f400-0xcfc3f4ff) for rid 1c of pci0:0:30:2
pcib0: matched entry for 0.30.INTA
pcib0: slot 30 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27b8, revid=0x01
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x01
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:31:1
found-> vendor=0x8086, dev=0x27c0, revid=0x01
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xe880, size 3, enabled
pcib0: allocated type 4 (0xe880-0xe887) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0xe800, size 2, enabled
pcib0: allocated type 4 (0xe800-0xe803) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0xe480, size 3, enabled
pcib0: allocated type 4 (0xe480-0xe487) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0xe400, size 2, enabled
pcib0: allocated type 4 (0xe400-0xe403) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0xe080, size 4, enabled
pcib0: allocated type 4 (0xe080-0xe08f) for rid 20 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27da, revid=0x01
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: allocated type 4 (0x400-0x41f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
random: harvesting attach, 8 bytes (4 bits) from hostb0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib0: allocated type 4 (0xa000-0xafff) for rid 1c of pcib1
pcib0: allocated type 3 (0xcf700000-0xcf8fffff) for rid 20 of pcib1
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xcf700000-0xcf8fffff
pcib1: could not get PCI interrupt routing table for \134_SB_.PCI0.P0P2 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found-> vendor=0x17d3, dev=0x1880, revid=0x05
domain=0, bus=1, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 16 messages in map 0x14
map[10]: type I/O Port, range 32, base 0xa800, size 8, enabled
pcib1: allocated I/O port range (0xa800-0xa8ff) for rid 10 of pci0:1:0:0
map[14]: type Memory, range 64, base 0xcf8f0000, size 16, enabled
pcib1: allocated memory range (0xcf8f0000-0xcf8fffff) for rid 14 of pci0:1:0:0
map[1c]: type Memory, range 64, base 0xcf880000, size 18, enabled
pcib1: allocated memory range (0xcf880000-0xcf8bffff) for rid 1c of pci0:1:0:0
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
arcmsr0: <Areca SAS 6G Host Adapter RAID Controller (RAID6 capable)
arcmsr version[_IP_XXXXX] 2015-11-30
> port 0xa800-0xa8ff mem 0xcf8f0000-0xcf8fffff,0xcf880000-0xcf8bffff irq 16 at device 0.0 on pci1
Areca RAID adapter0: ARC-1882 F/W version V1.54 2017-08-11
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49
random: harvesting attach, 8 bytes (4 bits) from arcmsr0
random: harvesting attach, 8 bytes (4 bits) from pci1
random: harvesting attach, 8 bytes (4 bits) from pcib1
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xcfc80000-0xcfcfffff,0xe0000000-0xefffffff,0xcfc40000-0xcfc7ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: Found already configured flush page at 0xfed13000
pcib0: allocated type 3 (0xfed13000-0xfed13fff) for rid 64 of agp0
agp0: Allocated flush page phys 0xfed13000 virt 0xfffff800fed13000
agp0: aperture size is 256M, detected 764k stolen memory
agp0: AGP_I810_PGTBL_CTL: 3ffc0001
agp0: AGP_I855_GCC1: 0x10
agp0: AGP_I915_MSAC: 0xd1
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 65536
random: harvesting attach, 8 bytes (4 bits) from agp0
vgapci0: Boot video device
random: harvesting attach, 8 bytes (4 bits) from vgapci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib2
pcib0: allocated type 3 (0xcf900000-0xcf9fffff) for rid 20 of pcib2
pcib0: allocated type 3 (0xcfd00000-0xcfdfffff) for rid 24 of pcib2
pcib2: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 50
pcib2: using IRQ 256 for MSI
pcib2: [GIANT-LOCKED]
pcib2: HotPlug command: 0000 -> 1038
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xb000-0xbfff
pcib2: memory decode 0xcf900000-0xcf9fffff
pcib2: prefetched decode 0xcfd00000-0xcfdfffff
pci2: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x06
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xb800, size 8, enabled
pcib2: allocated I/O port range (0xb800-0xb8ff) for rid 10 of pci0:2:0:0
map[18]: type Memory, range 64, base 0xcf9ff000, size 12, enabled
pcib2: allocated memory range (0xcf9ff000-0xcf9fffff) for rid 18 of pci0:2:0:0
map[20]: type Prefetchable Memory, range 64, base 0xcfdfc000, size 14, enabled
pcib2: allocated prefetch range (0xcfdfc000-0xcfdfffff) for rid 20 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xcf9ff000-0xcf9fffff,0xcfdfc000-0xcfdfffff irq 16 at device 0.0 on pci2
re0: MSI count : 1
re0: MSI-X count : 4
re0: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 257 to local APIC 1 vector 50
re0: using IRQ 257 for MSI-X
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 4
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
random: harvesting attach, 8 bytes (4 bits) from rgephy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
re0: Using defaults for TSO: 65518/35/2048
re0: bpf attached
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
random: harvesting attach, 8 bytes (4 bits) from re0
random: harvesting attach, 8 bytes (4 bits) from pci2
random: harvesting attach, 8 bytes (4 bits) from pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib3
pcib0: allocated type 3 (0xcfa00000-0xcfafffff) for rid 20 of pcib3
pcib0: allocated type 3 (0xcfe00000-0xcfefffff) for rid 24 of pcib3
pcib3: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 258 to local APIC 0 vector 51
pcib3: using IRQ 258 for MSI
pcib3: [GIANT-LOCKED]
pcib3: HotPlug command: 0000 -> 1038
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xcfa00000-0xcfafffff
pcib3: prefetched decode 0xcfe00000-0xcfefffff
pci3: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x10ec, dev=0x8168, revid=0x06
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xc800, size 8, enabled
pcib3: allocated I/O port range (0xc800-0xc8ff) for rid 10 of pci0:3:0:0
map[18]: type Memory, range 64, base 0xcfaff000, size 12, enabled
pcib3: allocated memory range (0xcfaff000-0xcfafffff) for rid 18 of pci0:3:0:0
map[20]: type Prefetchable Memory, range 64, base 0xcfefc000, size 14, enabled
pcib3: allocated prefetch range (0xcfefc000-0xcfefffff) for rid 20 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xcfaff000-0xcfafffff,0xcfefc000-0xcfefffff irq 17 at device 0.0 on pci3
re1: MSI count : 1
re1: MSI-X count : 4
re1: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 259 to local APIC 1 vector 51
re1: using IRQ 259 for MSI-X
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: OUI 0x00e04c, model 0x0011, rev. 4
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
random: harvesting attach, 8 bytes (4 bits) from rgephy1
random: harvesting attach, 8 bytes (4 bits) from miibus1
re1: Using defaults for TSO: 65518/35/2048
re1: bpf attached
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
random: harvesting attach, 8 bytes (4 bits) from re1
random: harvesting attach, 8 bytes (4 bits) from pci3
random: harvesting attach, 8 bytes (4 bits) from pcib3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xe000-0xe01f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
usbus0: random: harvesting attach, 8 bytes (4 bits) from uhci0
12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xdc00-0xdc1f irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 52
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci1: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus1
usbus1: random: harvesting attach, 8 bytes (4 bits) from uhci1
12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd880-0xd89f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci2: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus2
usbus2: random: harvesting attach, 8 bytes (4 bits) from uhci2
12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
uhci3: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus3
usbus3: random: harvesting attach, 8 bytes (4 bits) from uhci3
12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xcfc3fc00-0xcfc3ffff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
ehci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus4
usbus4: random: harvesting attach, 8 bytes (4 bits) from ehci0
480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: special decode subtractive
pci4: <ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
random: harvesting attach, 8 bytes (4 bits) from pci4
random: harvesting attach, 8 bytes (4 bits) from pcib4
pcm0: <Intel ICH7 (82801GB)> port 0xd400-0xd4ff,0xd080-0xd0bf mem 0xcfc3f800-0xcfc3f9ff,0xcfc3f400-0xcfc3f4ff irq 17 at device 30.2 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 53
pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
random: harvesting attach, 8 bytes (4 bits) from pcm0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
random: harvesting attach, 8 bytes (4 bits) from isa0
random: harvesting attach, 8 bytes (4 bits) from isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
random: harvesting attach, 8 bytes (4 bits) from ata0
random: harvesting attach, 8 bytes (4 bits) from atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xe880-0xe887,0xe800-0xe803,0xe480-0xe487,0xe400-0xe403,0xe080-0xe08f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
random: harvesting attach, 8 bytes (4 bits) from ata2
ata3: <ATA channel> at channel 1 on atapci1
random: harvesting attach, 8 bytes (4 bits) from ata3
random: harvesting attach, 8 bytes (4 bits) from atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
random: harvesting attach, 8 bytes (4 bits) from pci0
random: harvesting attach, 8 bytes (4 bits) from pcib0
acpi_button0: <Power Button> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_button0
random: harvesting attach, 8 bytes (4 bits) from atdma0
random: harvesting attach, 8 bytes (4 bits) from fpupnp0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 54
uart0: fast interrupt
uart0: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 55
uart1: fast interrupt
uart1: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart1
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 1 vector 55
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
random: harvesting attach, 8 bytes (4 bits) from lpt0
ppi0: <Parallel I/O> on ppbus0
random: harvesting attach, 8 bytes (4 bits) from ppi0
random: harvesting attach, 8 bytes (4 bits) from ppbus0
random: harvesting attach, 8 bytes (4 bits) from ppc0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 11 on acpi0
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 56
uart2: fast interrupt
uart2: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart2
uart3: <16550 or compatible> port 0x2e8-0x2ef irq 11 on acpi0
uart3: fast interrupt
uart3: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart3
uart4: <16550 or compatible> port 0x2f0-0x2f7 irq 11 on acpi0
uart4: fast interrupt
uart4: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart4
uart5: <16550 or compatible> port 0x2e0-0x2e7 irq 11 on acpi0
uart5: fast interrupt
uart5: PPS capture mode: DCDinvalid
random: harvesting attach, 8 bytes (4 bits) from uart5
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 56
atkbd0: [GIANT-LOCKED]
random: harvesting attach, 8 bytes (4 bits) from atkbd0
psm0: unable to allocate IRQ
random: harvesting attach, 8 bytes (4 bits) from atkbdc0
ACPI: Enabled 1 GPEs in block 00 to 1F
random: harvesting attach, 8 bytes (4 bits) from acpi0
random: harvesting attach, 8 bytes (4 bits) from apic0
acpi0: wakeup code va 0xfffffe005f0a2000 pa 0x99000
random: harvesting attach, 8 bytes (4 bits) from nexus0
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
random: harvesting attach, 8 bytes (4 bits) from orm0
sc0 failed to probe on isa0
vga0 failed to probe on isa0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
isa_probe_children: probing PnP devices
AcpiOsExecute: task queue not started
random: harvesting attach, 8 bytes (4 bits) from acpi_perf0
AcpiOsExecute: task queue not started
random: harvesting attach, 8 bytes (4 bits) from acpi_perf1
est0: <Enhanced SpeedStep Frequency Control> on cpu0
random: harvesting attach, 8 bytes (4 bits) from cpufreq0
random: harvesting attach, 8 bytes (4 bits) from est0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
random: harvesting attach, 8 bytes (4 bits) from cpufreq1
random: harvesting attach, 8 bytes (4 bits) from est1
Device configuration finished.
procfs registered
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lapic: Divisor 2, Frequency 133341075 Hz
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
IPsec: Initialized Security Association Processing.
AcpiOsExecute: enqueue 2 pending tasks
hptnr: no controller detected.
hptrr: no controller detected.
hpt27xx: no controller detected.
nvme cam probe device init
pcm0: measured ac97 link rate at 48018 Hz, will use 48000 Hz
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen4.1: <Intel EHCI root HUB> at usbus4
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
uhub2: 2 ports with 2 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub2
uhub4: 2 ports with 2 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub4
uhub3: 2 ports with 2 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub3
ata0: reset tp1 mask=03 ostat0=7f ostat1=50
ata0: stat0=0x00 err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x20000
ata2: SATA reset: ports status=0x00
ata3: SATA reset: ports status=0x00
GEOM: new disk da0
pass0 at arcmsr0 bus 0 scbus0 target 0 lun 0
pass0: <WDC WD3000FYYZ-01UL1 R001> Fixed Direct Access SPC-3 SCSI device
pass0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
pass0: 600.000MB/s transfers
pass0: Command Queueing enabled
pass1 at arcmsr0 bus 0 scbus0 target 0 lun 1
pass1: <WDC WD3000FYYZ-01UL1 R001> Fixed Direct Access SPC-3 SCSI device
pass1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
pass1: 600.000MB/s transfers
pass1: Command Queueing enabled
pass2 at arcmsr0 bus 0 scbus0 target 16 lun 0
pass2: da0 at arcmsr0 bus 0 scbus0 target 0 lun 0
<Areca RAID controller R001> Fixed Processor SCSI device
da0: <WDC WD3000FYYZ-01UL1 R001> Fixed Direct Access SPC-3 SCSI device
pass3 at ata0 bus 0 scbus1 target 1 lun 0
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
pass3: <TEAC CD-224E-R 1.CA> Removable CD-ROM SCSI device
da0: 600.000MB/s transferspass3: 33.300MB/s transfers
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors)
(UDMA2, ATAPI 12bytes, da0: Delete methods: <NONE(*),ZERO>
PIO 65534bytesda1 at arcmsr0 bus 0 scbus0 target 0 lun 1
)
da1: <WDC WD3000FYYZ-01UL1 R001> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors)
da1: Delete methods: <NONE(*),ZERO>
cd0 at ata0 bus 0 scbus1 target 1 lun 0
cd0: <TEAC CD-224E-R 1.CA> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM: new disk da1
GEOM: new disk cd0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus4
uhub1: 8 ports with 8 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub1
start_init: trying /sbin/init
warning: total configured swap (2097152 pages) exceeds maximum recommended amount (1969344 pages).
warning: increase kern.maxswzone or reduce amount of swap.
re0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to DOWN