Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-10-28 18:52:39
From: Sevan / Venture37
Description: SGI o2 R5K 1.8Ghz, 64MB RAM
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.0_BETA (GENERIC32_IP3x.201710252110Z) total memory = 65528 KB (6848 KB reserved for ARCS) avail memory = 50640 KB timecounter: Timecounters tick every 10.000 msec mainbus0 (root): SGI-IP32 [SGI, 9], 1 processor cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0 cpu0: 48 TLB entries, 16MB max page size cpu0: 32KB/32B 2-way set-associative L1 instruction cache cpu0: 32KB/32B 2-way set-associative write-back L1 data cache cpu0: 512KB/32B direct-mapped write-through L2 unified cache crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161) crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine crmfb0: initial resolution 1280x1024 crmfb0: allocated 5242880 byte fb @ 0x80040000 (0xa1400000) wsdisplay0 at crmfb0 kbdmux 1 wsmux1: connecting to wsdisplay0 mace0 at mainbus0 addr 0x1f000000 lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000 com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo com0: console com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller mcclock0 at mace0 offset 0x3a0000 intrmask 0x0 mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1 mec0: Ethernet address 08:00:69: nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1 audio0 at mavb0: full duplex, playback, capture, mmap, independent mavb0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 spkr0 at audio0: PC Speaker (synthesized) macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1 pci0 at macepci0 bus 0 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter ahc0: interrupting at crime interrupt 8 ahc0: Using left over BIOS settings ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs scsibus0 at ahc0: 16 targets, 8 luns per target ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter ahc1: interrupting at crime interrupt 9 ahc1: Using left over BIOS settings ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs scsibus1 at ahc1: 16 targets, 8 luns per target vendor 10a9 product 0005 (miscellaneous prehistoric, revision 0xd0) at pci0 dev 3 function 0 not configured timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mips3_cp0_counter" frequency 90002420 Hz quality 100 scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 1 lun 0: <FUJITSU, MAJ3182MC, 5509> disk fixed sd0: 17366 MB, 14739 cyl, 5 head, 482 sec, 512 bytes/sect x 35566478 sectors sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> cdrom removable cd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs kern.module.path=/stand/sgimips/8.0/modules pid 1(init): ABI set to O32 (e_flags=0x1007)