Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2017-12-23 15:01:54
From: Sevan / Venture37
Description: Gigabyte 946GMX-S2 motherboard
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.4 (GENERIC) #0: Sat Oct 21 22:03:01 UTC 2017 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC total memory = 2046 MB avail memory = 1965 MB rnd: seeded with 128 bits timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Gigabyte Technology Co., Ltd. 946GMX-S2 ( ) mainbus0 (root) ACPI: RSDP 0x00000000000F6580 000014 (v00 GBT ) ACPI: RSDT 0x000000007FEF3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 0x000000007FEF30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 0x000000007FEF3180 00423A (v01 GBT GBTUACPI 00001000 MSFT 0100000C) ACPI: FACS 0x000000007FEF0000 000040 ACPI: HPET 0x000000007FEF7500 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 0x000000007FEF7580 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 0x000000007FEF7400 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: SSDT 0x000000007FEF7600 00019E (v01 PmRef Cpu0Ist 00003000 INTL 20040311) ACPI: SSDT 0x000000007FEF7A90 000275 (v01 PmRef CpuPm 00003000 INTL 20040311) ACPI: 3 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, id 0x6fd cpu0: package 0, core 0, smt 0 cpu1 at mainbus0 apid 1 cpu1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, id 0x6fd cpu1: package 0, core 1, smt 0 acpi0 at mainbus0: Intel ACPICA 20170831 acpi0: X/RSDT: OemId <GBT ,GBTUACPI,42302e31>, AslId <GBTU,01010101> acpi0: MCFG: segment 0, bus 0-255, address 0x00000000d0000000 acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button SYSR (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 spkr0 at pcppi1: PC Speaker wsbell at spkr0 not configured midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 PMIO (PNP0C02) at acpi0 not configured EXPL (PNP0C02) at acpi0 not configured MEM (PNP0C01) at acpi0 not configured FWH (INT0800) at acpi0 not configured ACPI: Enabled 1 GPEs in block 00 to 1F attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 2970 (rev. 0x02) agp0 at pchb0: i965-family chipset agp0: detected 508k stolen memory agp0: aperture at 0xe0000000, size 0x20000000 i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2972 (rev. 0x02) drm: Memory usable by graphics device = 512M drm: Supports vblank timestamp caching Rev 2 (21.10.2013). drm: Driver supports precise vblank timestamp query. i915drmkms0: interrupting at ioapic0 pin 16 (i915) drm: initialized overlay support intelfb0 at i915drmkms0 i915drmkms0: info: registered panic notifier intelfb0: framebuffer at 0xffff800024d78000, size 1280x1024, depth 32, stride 5120 wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at msi0 vec 0 hdafg0 at hdaudio0: vendor 10ec product 0888 hdafg0: DAC00 8ch: Speaker [Jack] hdafg0: DAC01 2ch: HP Out [Jack] hdafg0: DIG02 2ch: SPDIF Out [Jack] hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack] hdafg0: ADC04 2ch: Mic In [Jack] hdafg0: DIG-In05 2ch: SPDIF In [Jack] hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: full duplex, playback, capture, mmap, independent hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 spkr1 at audio0: PC Speaker (synthesized) wsbell at spkr1 not configured uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x01) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x01) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x01) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x01) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x01) ehci0: interrupting at ioapic0 pin 23 ehci0: EHCI version 1.0 ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb0 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xe1) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled re0 at pci1 dev 5 function 0: RealTek 8169SC/8110SC Single-chip Gigabit Ethernet (rev. 0x10) re0: interrupting at ioapic0 pin 21 re0: Ethernet address 00:1d:7d: re0: using 256 tx descriptors rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b8 (rev. 0x01) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: Min/Max interval 1/367 seconds piixide0 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01) piixide0: bus-master DMA support present piixide0: primary channel configured to native-PCI mode piixide0: using ioapic0 pin 19 for native-PCI interrupt atabus0 at piixide0 channel 0 piixide0: secondary channel configured to native-PCI mode atabus1 at piixide0 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x01) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 pckbc0 at isa0 port 0x60-0x64 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: P0: I/O, lat 160 us, pow 88000 mW, 2200 MHz acpicpu0: P1: I/O, lat 160 us, pow 67000 mW, 1600 MHz acpicpu0: P2: I/O, lat 160 us, pow 54000 mW, 1200 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 50 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 IPsec: Initialized Security Association Processing. uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ehci0: handing over low speed device on port 5 to uhci2 uhidev0 at uhub2 port 1 configuration 1 interface 0 uhidev0: Dell (0x413c) Dell USB Keyboard (0x2003), rev 1.10/2.00, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 Variable keys, 6 Array codes wd0 at atabus0 drive 0 wd0: <HDS728080PLA380> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT boot device: wd0 root on wd0a dumps on wd0b wskbd0 at ukbd0: console keyboard, using wsdisplay0 root file system type: ffs kern.module.path=/stand/amd64/8.99.4/modules wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation)