Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-01-25 20:21:32
From: AMDmi3
Description: Dell Latitude E7470
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 d71bcb11d(drm-next): Wed Jun 21 17:14:15 MSK 2017
    root@marakasov:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz (2808.10-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406e3  Family=0x6  Model=0x4e  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16229916672 (15478 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1404051523 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff80f25f10, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
ACPI Error: Method parse/execution failed \134_SB.PCI0.IOTR._CRS, AE_AML_NO_RESOURCE_END_TAG (20170531/psparse-677)
ACPI Error: Method execution failed \134_SB.PCI0.IOTR._CRS, AE_AML_NO_RESOURCE_END_TAG (20170531/uteval-219)
can't fetch resources for \134_SB_.PCI0.IOTR - AE_AML_NO_RESOURCE_END_TAG
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x14> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xe1230000-0xe123ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms, UART> at device 22.3 (no driver attached)
ahci0: <Intel ICH8M AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xe1250000-0xe1251fff,0xe1254000-0xe12540ff,0xe1253000-0xe12537ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 29.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <unknown> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xe1248000-0xe124bfff,0xe1220000-0xe122ffff irq 16 at device 31.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection> mem 0xe1200000-0xe121ffff irq 16 at device 31.6 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: PCIY_MSIX capability not found; or rid 0 == 0.
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37b irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xda000-0xdafff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC293 (Analog 2.0+HP/2.0)> at nid 20,21 and 25 on hdaa0
pcm1: <Realtek ALC293 (Analog)> at nid 22 and 19 on hdaa0
hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <Micron 1100 SATA 512GB M0DL002> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 488386MB (1000215216 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: hardware
Root mount waiting for: usbus0
uhub0: 18 ports with 18 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <CNFEH53M515120014552 IntegratedWebcamHD> at usbus0
Root mount waiting for: usbus0
ugen0.3: <vendor 0x413c product 0x2513> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x413c product 0x2513, class 9/0, rev 2.00/0.05, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <Logitech USB Optical Mouse> at usbus0
Root mount waiting for: usbus0
ugen0.5: <Logitech USB Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <USB Keyboard> on usbus0
kbd2 at ukbd0
ugen0.6: <vendor 0x413c product 0x2513> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x413c product 0x2513, class 9/0, rev 2.00/0.05, addr 5> on usbus0
uhub2: MTT enabled
Root mount waiting for: usbus0
uhub2: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.7: <vendor 0x8087 product 0x0a2b> at usbus0
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xe1100000-0xe1101fff irq 16 at device 0.0 on pci1
iwm0: hw rev 0x200, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
Link state changed to up
em0: link state changed to UP
link state changed to down
em0: link state changed to DOWN
Link state changed to up
em0: link state changed to UP
wlan0: link state changed to UP
ums0 on uhub1
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub1
uhid0: <USB Keyboard> on usbus0
ubt0 on uhub0
ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.01, addr 6> on usbus0
wlan0: link state changed to DOWN
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ubt0: ubt_ctrl_write_callback:780: control transfer failed: USB_ERR_TIMEOUT
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout