Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.

Date: 2018-02-24 15:30:29
From: tsutsui
Description: HITACHI FLORA 220TX with Transmeta Crusoe TM5600
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.1.1 (GENERIC.201712222334Z)
total memory = 175 MB
avail memory = 156 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HITACHI         FLORA 220TX               
mainbus0 (root)
ACPI: RSDP 0xf6e10 000014 (v00 HTCLTD)
ACPI: RSDT 0xaffabb6 00002C (v01 HTCLTD HTC20B1  00000001  PTL 00000000)
ACPI: FACP 0xafffb65 000074 (v01 HTCLTD HTC20B1  00000001 PTL  00000001)
ACPI: DSDT 0xaffabe2 004F83 (v01 HTCLTD HTC20B1  00000001 MSFT 0100000D)
ACPI: FACS 0xaffffc0 000040
ACPI: BOOT 0xafffbd9 000027 (v01 HTCLTD HTC20B1  00000001  PTL 00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0: Transmeta(tm) Crusoe(tm) Processor TM5600, id 0x543
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HTCLTD,HTC20B1 ,00000001>, AslId < PTL,00000000>
LNKD: ACPI: Found matching pin for 0.5.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
LNKA: ACPI: Found matching pin for 0.10.INTA at func 0: 255
LNKC: ACPI: Found matching pin for 0.11.INTA at func 0: 10
LNKB: ACPI: Found matching pin for 0.12.INTA at func 0: 5
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (EC, PNP0C09)
: io 0x62,0x66
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MATH (PNP0C04) at acpi0 not configured
MBRD (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0320) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUS, PNP0F13) (aux port): irq 12
LPT (PNP0401) at acpi0 not configured
COMA (HTCC120) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat1 at acpi0 (BAT2, PNP0C0A-2): ACPI Battery
acpitz0 at acpi0 (THRM): cpu0
acpitz0: levels: critical 119.8 C, passive 99.8 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1279 product 0x0395 (rev. 0x00)
vendor 0x1279 product 0x0396 (RAM memory) at pci0 dev 0 function 1 not configured
vendor 0x1279 product 0x0397 (RAM memory) at pci0 dev 0 function 2 not configured
vga0 at pci0 dev 5 function 0: vendor 0x1023 product 0x9525 (rev. 0x49)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pcib0 at pci0 dev 7 function 0: vendor 0x8086 product 0x7110 (rev. 0x02)
piixide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3: vendor 0x8086 product 0x7113 (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: SMBus disabled
cbb0 at pci0 dev 10 function 0: vendor 0x104c product 0xac50 (rev. 0x01)
fxp0 at pci0 dev 11 function 0: i82559S Ethernet (rev. 0x09)
fxp0: interrupting at irq 10
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x115d product 0x00d3 (serial communications, 16550-compat) at pci0 dev 11 function 1 not configured
yds0 at pci0 dev 12 function 0: vendor 0x1073 product 0x0010 (rev. 0x02)
yds0: interrupting at irq 5
yds0: ac97: Asahi Kasei AK4541/AK4543 codec; headphone, 18 bit DAC, 18 bit ADC, AKM 3D
yds0: ac97: ext id 0x200<AMAP>
audio0 at yds0: full duplex, playback, capture, mmap, independent
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x21000
cbb0: secondary bus number uninitialized; try PCI_BUS_FIXUP
LNKA: Picked IRQ 11 with weight 2
cbb0: interrupting at irq 11
cardslot0 at cbb0
pcmcia0 at cardslot0
opl0 at yds0: model OPL3
midi1 at opl0: DS-1 integrated Yamaha OPL3
mpu0 at yds0
midi2 at mpu0: Yamaha DS-1 MIDI UART
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat   3 us, pow     0 mW
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <HITACHI_DK23BA-20>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 38760 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA CR-271, , 1HTP> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs