Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-03-22 09:52:51
From: utkarsh009
Description: FreeBSD booting on [FX8350 GTX1070] custom PC.
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: AMD FX(tm)-8350 Eight-Core Processor (4018.70-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8215465984 (7834 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 2009348105 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x10f0) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe200000-0xfe200fff irq 44 at device 0.0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe100000-0xfe100fff,0xd2100000-0xd2103fff irq 48 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf050-0xf05f mem 0xfe30b000-0xfe30b3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe30a000-0xfe30afff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe309000-0xfe3090ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe308000-0xfe308fff irq 18 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe307000-0xfe3070ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe300000-0xfe303fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe306000-0xfe306fff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe305000-0xfe305fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
usbus6: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe304000-0xfe3040ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
usbus7: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <NVIDIA (0x0083) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0083) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0083) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0083) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0083) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0083) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm5: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
pcm6: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa1
ugen0.1: <0x1106 XHCI root HUB> at usbus0
ugen7.1: <ATI EHCI root HUB> at usbus7
ugen6.1: <ATI OHCI root HUB> at usbus6
ugen4.1: <ATI EHCI root HUB> at usbus4
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen3.1: <ATI OHCI root HUB> at usbus3
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen5.1: <ATI OHCI root HUB> at usbus5
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub6: 2 ports with 2 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub7: 5 ports with 5 removable, self powered
uhub0: 5 ports with 4 removable, self powered
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub8 on uhub0
uhub8: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
uhub8: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
ada0 at ata0 bus 0 scbus4 target 0 lun 0
ada0: <ST1000DM010-2EP102 CC43> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 150.000MB/s transfers (SATA, UDMA6, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
uhub2: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
ugen0.3: <Logitech Gaming Mouse G402> at usbus0
ukbd0 on uhub8
ukbd0: <Logitech Gaming Mouse G402, class 0/0, rev 2.00/90.02, addr 2> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus2 usbus0
ugen0.4: <SINO WEALTH Mechanical Keyboard> at usbus0
ukbd1 on uhub8
ukbd1: <SINO WEALTH Mechanical Keyboard, class 0/0, rev 1.10/7.13, addr 3> on usbus0
kbd3 at ukbd1
ukbd2 on uhub8
ukbd2: <SINO WEALTH Mechanical Keyboard, class 0/0, rev 1.10/7.13, addr 3> on usbus0
kbd4 at ukbd2
ugen2.2: <vendor 0x0b05 product 0x1786> at usbus2
Root mount waiting for: usbus2
Root mount waiting for: usbus2
ugen2.3: <JetFlash Mass Storage Device> at usbus2
umass0 on uhub2
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 3> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:6:0: Attached to scbus6
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <JetFlash Transcend 8GB 1100> Removable Direct Access SPC-2 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 7728MB (15826944 512 byte sectors)
da0: quirks=0x12<NO_6_BYTE,NO_RC16>
GEOM: da0: the secondary GPT table is corrupt or invalid.
GEOM: da0: using the primary only -- recovery suggested.
GEOM: diskid/DISK-735V5JJ8UD81QOO9: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-735V5JJ8UD81QOO9: using the primary only -- recovery suggested.
random: unblocking device.
GEOM: diskid/DISK-735V5JJ8UD81QOO9: the secondary GPT table is corrupt or invalid.
GEOM: diskid/DISK-735V5JJ8UD81QOO9: using the primary only -- recovery suggested.
re0: link state changed to DOWN
ums0 on uhub8
ums0: <Logitech Gaming Mouse G402, class 0/0, rev 2.00/90.02, addr 2> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
rsu0 on uhub2
rsu0: <vendor 0x0b05 product 0x1786, class 0/0, rev 2.00/2.00, addr 2> on usbus2
rsu0: MAC/BB RTL8712 cut 3 1T1R
rsu0: rsu_attach: enabling 11n
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP