Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-05-04 18:17:28
From: nullnilaki
Description: NetBSD 7.1 with custom bootloder on Indigo R4000
>> boot -f bootp()192.168.1.31:/tftpboot/aoutboot
Obtaining /tftpboot/aoutboot from server[_IP_XXXXXXX]
46368+4864+1832 entry: 0x88002000
IRIS1
IRIS2
devopen
devopen: scsi(0)disk(1)rdisk(0)partition(0) type scsi file netbsd
4478512+132784 [251008+248699]=0x4e0360
phys segment: 0xd000 @ 0x8002000
adding 0xd000 @ 0x8002000 to freelist 0
phys segment: 0x731000 @ 0x800f000
adding 0x59000 @ 0x800f000 to freelist 0
adding 0x1ff000 @ 0x8541000 to freelist 0
phys segment: 0x7800000 @ 0x8800000
adding 0x7800000 @ 0x8800000 to freelist 0
pmap_steal_memory: seg 0: 0x8002 0x8002 0x800f 0x800f
pmap_steal_memory: seg 0: too small for 41 pages
pmap_steal_memory: seg 1: 0x800f 0x800f 0x8068 0x8068
pmap_steal_memory: seg 0: 0x8002 0x8002 0x800f 0x800f
pmap_steal_memory: seg 0: 0x8004 0x8004 0x800f 0x800f
pmap_steal_memory: seg 0: too small for 600 pages
pmap_steal_memory: seg 1: 0x8038 0x8038 0x8068 0x8068
pmap_steal_memory: seg 1: too small for 600 pages
pmap_steal_memory: seg 2: 0x8541 0x8541 0x8740 0x8740
pmap_steal_memory: seg 2: too small for 600 pages
pmap_steal_memory: seg 3: 0x8800 0x8800 0xfffe 0xfffe
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1 (GENERIC32_IP2x) #4: Mon Apr 30 14:51:47 UTC 2018
naruaki@:/usr/obj.sgimips/sys/arch/sgimips/compile/GENERIC32_IP2x
total memory = 128 MB
(768 KB reserved for ARCS)
avail memory = 119 MB
kern.module.path=/stand/sgimips/7.1/modules
mainbus0 (root): SGI-IP20 [SGI, 69063ecf], 1 processor
cpu0 at mainbus0: MIPS R4000 CPU (0x422) Rev. 2.2 with MIPS R4010 FPC Rev. 0.0
cpu0: 48 TLB entries, 16MB max page size
cpu0: 8KB/16B direct-mapped L1 instruction cache
cpu0: 8KB/16B direct-mapped write-back L1 data cache
cpu0: 1024KB/128B direct-mapped write-back L2 unified cache
int0 at mainbus0 addr 0x1fb801c0
int0: bus 50MHz, CPU 100MHz
imc0 at mainbus0 addr 0x1fa00000: revision 3
gio0 at imc0
light0 at gio0: SGI LG2 (board revision 3)
wsdisplay0 at light0 kbdmux 1
hpc0 at gio0: SGI HPC1.5 (onboard)
zsc0 at hpc0 offset 0xd10
zstty0 at zsc0 channel 1 (console i/o)
zstty1 at zsc0 channel 0
zsc1 at hpc0 offset 0xd00
zsms0 at zsc1 channel 1: baud rate 4800
wsmouse0 at zsms0 mux 0
zskbd0 at zsc1 channel 0: baud rate 600
wskbd0 at zskbd0 mux 1
sq0 at hpc0 offset 0x100: SGI Seeq 80c03
sq0: Ethernet address [_MAC_XXXXXXXXXX]
wdsc0 at hpc0 offset 0x11f: WD33C93B (20.0 MHz clock, BURST DMA, SCSI ID 0)
wdsc0: microcode revision 0x0d, Fast SCSI
scsibus0 at wdsc0: 8 targets, 8 luns per target
dpclock0 at mainbus0 addr 0x1fb80e00
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <DEC, RZ26 (C) DEC, 392A> disk fixed
sd0: 1001 MB, 2570 cyl, 14 head, 57 sec, 512 bytes/sect x 2050860 sectors
sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers, tagged queueing
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
pid 1(init): ABI set to O32 (e_flags=0x1007)
Enter pathname of shell or RETURN for /bin/sh:
Terminal type is vt100.
We recommend that you create a non-root account and use su(1) for root access.
#