Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.

Date: 2018-05-09 02:42:59
From: Baenwort
Description: HP zBook 15 G3
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #17 ae187cb00(trueos-master): Fri Jan 26 21:09:38 UTC 2018
    root@chimera:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (branches/release_60 323338) (based on LLVM 6.0.0)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) CPU E3-1545M v5 @ 2.90GHz (2904.14-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features3=0xc000000<IBPB,STIBP>
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16337039360 (15580 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 80D5    >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
Timecounter "TSC-low" frequency 1452071818 Hz quality 1000
random: entropy device external interface
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8102c3c0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xcb000000-0xcbffffff,0x40000000-0x4fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xcc320000-0xcc32ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5040-0x505f mem 0xcc348000-0xcc349fff,0xcc34e000-0xcc34e0ff,0xcc34c000-0xcc34c7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: EM timeout
device_attach: ahciem0 attach returned 6
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0xcc000000-0xcc003fff irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <unknown> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Sunrise Point HDA Controller> mem 0xcc344000-0xcc347fff,0xcc330000-0xcc33ffff irq 16 at device 31.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection> mem 0xcc300000-0xcc31ffff irq 16 at device 31.6 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: PCIY_MSIX capability not found; or rid 0 == 0.
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvd0: <THNSN5256GPU7 TOSHIBA> NVMe namespace
nvd0: 244198MB (500118192 512 byte sectors)
hdacc0: <Conexant CX20724 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20724 Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20724 (Analog)> at nid 23 and 26 on hdaa0
pcm1: <Conexant CX20724 (Right Analog Headphones)> at nid 22 on hdaa0
hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
kbd2 at ukbd0
ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0
ugen0.4: <SanDisk ExtremePro> at usbus0
umass0 on uhub0
umass0: <SanDisk ExtremePro, class 0/0, rev 3.00/0.10, addr 3> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <SanDisk ExtremePro 0001> Removable Direct Access SPC-4 SCSI device
da0: Serial Number xxxxxxxx
da0: 400.000MB/s transfers
da0: 122104MB (250069680 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Trying to mount root from zfs:tank/ROOT/12.0-CURRENT-up-20180227_211803 []...
iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xcc100000-0xcc101fff irq 16 at device 0.0 on pci2
iwm0: hw rev 0x200, fw ver 22.361476.0, address xx:xx:xx:xx:xx:xx
Cuse v0.1.35 @ /dev/cuse
acpi_video0: <ACPI video extension> on vgapci0
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2