Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-05-29 10:59:21
From: zafer
Description: NetBSD-8.99.17 with hyper-v patch
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.99.17 (GENERIC) #0: Sat May 19 08:28:49 UTC 2018
zafer@current:/lfs/objdir/sys/arch/amd64/compile/GENERIC
total memory = 4095 MB
avail memory = 3952 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Hyper-V Version: 10.0.14393 [SP0]
Features=0x2e7f<VPRUNTIME,TMREFCNT,SYNIC,SYNTM,APIC,HYPERCALL,VPINDEX,REFTSC,IDLE,TMFREQ>
PM Features=0x0 [C2]
Features3=0xed7b2<DEBUG,XMMHC,IDLE,NUMA,TMFREQ,SYNCMC,CRASH,NPIEP>
Recommends: 00000c2c 00000fff
Limits: Vcpu:240 Lcpu:512 Int:16080
HW Features: 0000000f, AMD: 00000000
timecounter: Timecounter "Hyper-V" frequency 10000000 Hz quality 2000
timecounter: Timecounter "Hyper-V-TSC" frequency 10000000 Hz quality 3000
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Microsoft Corporation Virtual Machine (7.0)
mainbus0 (root)
ACPI: RSDP 0x00000000000F5BF0 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000001FFF0000 000040 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097)
ACPI: FACP 0x000000001FFF0200 000081 (v02 VRTUAL MICROSFT 06001702 MSFT 00000097)
ACPI: DSDT 0x000000001FFF1D24 003CBE (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
ACPI: FACS 0x000000001FFFF000 000040
ACPI: WAET 0x000000001FFF1A80 000028 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097)
ACPI: SLIC 0x000000001FFF1AC0 000176 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097)
ACPI: OEM0 0x000000001FFF1CC0 000064 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097)
ACPI: SRAT 0x000000001FFF0800 000140 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
ACPI: APIC 0x000000001FFF0300 000452 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097)
ACPI: OEMB 0x000000001FFFF040 000064 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x11, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Xeon(R) CPU E5-2673 v4 @ 2.30GHz, id 0x406f1
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Xeon(R) CPU E5-2673 v4 @ 2.30GHz, id 0x406f1
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20180427
acpi0: X/RSDT: OemId <VRTUAL,MICROSFT,06001702>, AslId <MSFT,00000097>
LNKA: ACPI: Found matching pin for 0.8.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
OSYS (PNP0C02) at acpi0 not configured
vmbus0 at acpi0 (VMB8, VMBUS-0): Hyper-V VMBus
SYSM (PNP0C01) at acpi0 not configured
GENC (HYPER_V_GEN_COUNTER_V1) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 0F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 7192 (rev. 0x03)
pcib0 at pci0 dev 7 function 0: vendor 8086 product 7110 (rev. 0x01)
piixide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixpm0 at pci0 dev 7 function 3: vendor 8086 product 7113 (rev. 0x02)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0: 24-bit timer
piixpm0: SMBus disabled
vga0 at pci0 dev 8 function 0: vendor 1414 product 5353 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
drm at vga0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
hyperv0 at cpu0: Hyper-V
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0
wd0: <Virtual HD>
wd0: drive supports 128-sector PIO transfers, LBA48 addressing
wd0: 1023 GB, 2128359 cyl, 16 head, 63 sec, 512 bytes/sect x 2145386496 sectors
vmbus0: protocol 3.0
"dynamic-memory" at vmbus0 not configured
"avma-4" at vmbus0 not configured
"mouse" at vmbus0 not configured
"keyboard" at vmbus0 not configured
"video" at vmbus0 not configured
"avma-2" at vmbus0 not configured
hvheartbeat0 at vmbus0: Hyper-V Heartbeat
"kvp" at vmbus0 not configured
hvshutdown0 at vmbus0: Hyper-V Shutdown
hvtimesync0 at vmbus0: Hyper-V Timesync
"vss" at vmbus0 not configured
"remote-desktop" at vmbus0 not configured
hvs0 at vmbus0: Hyper-V StorVSC IDE
IPsec: Initialized Security Association Processing.
hvs0: protocol 6.2
scsibus0 at hvs0: 2 targets, 1 lun per target
hvs1 at vmbus0: Hyper-V StorVSC IDE
sd0 at scsibus0 target 1 lun 0: <Msft, Virtual Disk, 1.0> disk fixed
wd0: 32-bit data port
hvs1: protocol 6.2
scsibus1 at hvs1: 2 targets, 1 lun per target
hvn0 at vmbus0: Hyper-V NetVSC
wd0: drive supports PIO mode 4, DMA mode 2, WRITE DMA FUA
wd1 at atabus0 drive 1
wd1: <Virtual HD>
wd1: drive supports 128-sector PIO transfers, LBA48 addressing
wd1: 8192 MB, 16644 cyl, 16 head, 63 sec, 512 bytes/sect x 16777216 sectors
sd0: fabricating a geometry
sd0: 1023 GB, 1047552 cyl, 64 head, 32 sec, 512 bytes/sect x 2145386496 sectors
sd0: fabricating a geometry
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, WRITE DMA FUA
wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA), WRITE DMA FUA EXT
wd1(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA), WRITE DMA FUA EXT
sd0: async, 8-bit transfers, tagged queueing
hvn0: NVS 5.0 NDIS 6.30
hvn0: Ethernet address [_MAC_XXXXXXXXXX]
hvs2 at vmbus0: Hyper-V StorVSC SCSI
hvs2: protocol 6.2
scsibus2 at hvs2: 2 targets, 64 luns per target
hvs3 at vmbus0: Hyper-V StorVSC SCSI
hvs3: protocol 6.2
scsibus3 at hvs3: 2 targets, 64 luns per target
boot device: wd0
root on wd0a dumps on wd0b
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/amd64/8.99.17/modules
/: replaying log to disk
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)