Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2018-06-29 05:27:15
From: msaitoh
Description: Dell Inspiron 1545
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 8.99.21 (GENERIC) #277: Fri Jun 29 12:59:59 JST 2018
        msaitoh@yukonfep:/disk/sources/NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 2008 MB
avail memory = 1925 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
NET_MPSAFE enabled
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron 1545
mainbus0 (root)
ACPI: RSDP 0x00000000000FBDD0 000024 (v02 DELL  )
ACPI: XSDT 0x000000007DAC3E00 000054 (v01 DELL   WN09     27D90C07 ASL  00000061)
ACPI: FACP 0x000000007DAC3C9C 0000F4 (v04 DELL   WN09     27D90C07 ASL  00000061)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180427/tbfadt-642)
ACPI: DSDT 0x000000007DAC4400 005451 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0x000000007DAD2C00 000040
ACPI: HPET 0x000000007DAC3F00 000038 (v01 DELL   WN09     00000001 ASL  00000061)
ACPI: APIC 0x000000007DAC4000 000068 (v01 DELL   WN09     27D90C07 ASL  00000047)
ACPI: MCFG 0x000000007DAC3FC0 00003E (v16 DELL   WN09     27D90C07 ASL  00000061)
ACPI: SLIC 0x000000007DAC409C 000176 (v01 DELL   WN09     27D90C07 ASL  00000061)
ACPI: SSDT 0x000000007DAC23A5 00066C (v01 PmRef  CpuPm    00003000 INTL 20050624)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
timecounter: Timecounter "lapic" frequency 199621498 Hz quality -100
cpu0: Celeron(R) Dual-Core CPU       T3000  @ 1.80GHz, id 0x1067a
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
ci_feat_val[7] = 00000000
cpu1: Celeron(R) Dual-Core CPU       T3000  @ 1.80GHz, id 0x1067a
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20180427
acpi0: X/RSDT: OemId <DELL  , WN09   ,27d90c07>, AslId <ASL ,00000061>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4007CDD9010 0005C6 (v01 PmRef  BspCst   00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE400438EC830 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
WSEC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MB4 (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [6,12,18,24,30,36,42,48,54,60,66,72,78,84,90,100]
acpiout2 at acpivga0 (DP, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DP2, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI2, 0x0303): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
acpivga0:   0x0300 (acpiout2): Unknown Output Device, head 0
acpivga0:   0x0301 (acpiout3): Unknown Output Device, head 0
acpivga0:   0x0302 (acpiout4): Unknown Output Device, head 0
acpivga0:   0x0303 (acpiout5): Unknown Output Device, head 0
acpivga1 at acpi0 (VID2): ACPI Display Adapter
acpivga1: autoconfiguration error: failed to evaluate \_SB_.PCI0.VID2._DOD: AE_BAD_DATA
MB2 (PNP0C01) at acpi0 not configured
MB3 (PNP0C01) at acpi0 not configured
MB1 (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Sanyo LION rechargeable battery
acpibat0: granularity: low->warn 0.020 Ah, warn->full 0.020 Ah
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings version 1
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 105.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
pckbd0 at pckbc2 (kbd slot)
allocated pic ioapic0 type edge pin 1 level 6 to cpu0 slot 1 idt entry 97
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: autoconfiguration error: Failed to initialize an ALPS device.
allocated pic ioapic0 type edge pin 12 level 6 to cpu0 slot 2 idt entry 98
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2a42 (rev. 0x07)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 3 idt entry 99
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff8000436bb000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 2a43 (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03)
allocated pic ioapic0 type level pin 20 level 6 to cpu0 slot 4 idt entry 100
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03)
allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 5 idt entry 101
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03)
allocated pic ioapic0 type level pin 22 level 6 to cpu0 slot 6 idt entry 102
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03)
allocated pic ioapic0 type level pin 22 level 6 to cpu0 slot 6 idt entry 102
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
allocated pic msi0 type edge pin 0 level 7 to cpu0 slot 16 idt entry 112
hdaudio0: interrupting at msi0 vec 0
hdafg0 at hdaudio0: vendor 111d product 76b2
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 11
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 2942 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 14e4 product 4315 (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 8086 product 2944 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 9
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 7 idt entry 103
, Yukon-2 FE+ rev. A0 (0x0): ioapic0 pin 18
msk0 at mskc0 port A: Ethernet address xx:xx:xx:xx:xx:xx
makphy0 at msk0 phy 0: Marvell 88E3016 10/100 Fast Ethernet PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb3 at pci0 dev 28 function 4: vendor 8086 product 2948 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03)
allocated pic ioapic0 type level pin 20 level 6 to cpu0 slot 4 idt entry 100
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03)
allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 5 idt entry 101
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03)
allocated pic ioapic0 type level pin 22 level 6 to cpu0 slot 6 idt entry 102
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03)
allocated pic ioapic0 type level pin 20 level 6 to cpu0 slot 4 idt entry 100
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93)
pci5 at ppb4 bus 3
pci5: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2919 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03)
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 7 idt entry 103
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2930 (rev. 0x03)
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 7 idt entry 103
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM, no parity or ECC, 1GB, 800MHz (PC2-6400)
spdmem0: 13 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 6-6-6-18
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x52
spdmem1: DDR2 SDRAM, no parity or ECC, 1GB, 800MHz (PC2-6400)
spdmem1: 13 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 6-6-6-18
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  17 us, pow   250 mW
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1795653180 Hz quality -100
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <SAMSUNG HM160HI>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <Optiarc DVD+/-RW AD-7560S, SAA0606950, SD05> cdrom removable
umass0 at uhub3 port 5 configuration 1 interface 0
umass0: Generic (0xbda) USB2.0-CRW (0x158), rev 2.00/58.88, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.21/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)