Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-07-16 04:50:15
From: tpaul
Description: NetBSD/amd64 8.0RC2 Thinkpad x220i
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0_RC2 (GENERIC) #0: Mon Jun 25 13:01:26 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 1931 MB
avail memory = 1852 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 4286A78 (ThinkPad X220)
mainbus0 (root)
ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
ACPI: XSDT 0x0000000078FFE120 0000A4 (v01 LENOVO TP-8D 00001280 PTEC 00000002)
ACPI: FACP 0x0000000078FE7000 0000F4 (v04 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: DSDT 0x0000000078FEA000 00F6D8 (v01 LENOVO TP-8D 00001280 INTL 20061109)
ACPI: FACS 0x0000000078F2D000 000040
ACPI: FACS 0x0000000078F2D000 000040
ACPI: SLIC 0x0000000078FFD000 000176 (v01 LENOVO TP-8D 00001280 PTEC 00000001)
ACPI: SSDT 0x0000000078FFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 0x0000000078FFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 0x0000000078FFA000 0007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 0x0000000078FE6000 000038 (v01 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: APIC 0x0000000078FE5000 000098 (v01 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: MCFG 0x0000000078FE4000 00003C (v01 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: ECDT 0x0000000078FE3000 000052 (v01 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: ASF! 0x0000000078FE9000 0000A5 (v32 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: TCPA 0x0000000078FE2000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x0000000078FE1000 0009A3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x0000000078FE0000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x0000000078FDF000 00003E (v01 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: UEFI 0x0000000078FDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 0x0000000078FDD000 000292 (v01 LENOVO TP-8D 00001280 PTL 00000002)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
x2APIC available but disabled for a suspected SandyBridge BIOS bug
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, id 0x206a7
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, id 0x206a7
cpu1: package 0, core 0, smt 1
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, id 0x206a7
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, id 0x206a7
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <LENOVO,TP-8D ,00001280>, AslId <PTEC,00000002>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8040363008 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80402F6008 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80402D5E88 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [10,15,20,25,30,35,40,45,50,55,60,65,70,80,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, LEN0068)
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 99.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0104 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0116 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: Wrong MCH_SSKPD value: 0x16040307
drm: This can cause pipe underruns and display issues.
drm: Please upgrade your BIOS to fix this.
drm: GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800042101000, size 1366x768, depth 32, stride 5504
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1c2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 14f1 product 506e
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 2805
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: DP02 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1c10 (rev. 0xb4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 1c12 (rev. 0xb4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 8086 product 0085 (rev. 0x34)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 2T2R, MoW, address [_MAC_XXXXXXXXXX]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 8086 product 1c16 (rev. 0xb4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: vendor 8086 product 1c18 (rev. 0xb4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci4 dev 0 function 0: vendor 1180 product e823 (rev. 0x04)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 3.0, rev 5, SDMA, 200000 kHz, HS SDR50 SDR104 HS200 3.3V, re-tuning mode 3, 512 byte blocks
sdmmc0 at sdhc0 slot 0
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1c26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1c4f (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1c03 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1c22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C3: I/O, lat 104 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2300 MHz
acpicpu0: P1: FFH, lat 10 us, pow 29079 mW, 2000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 25766 mW, 1800 MHz
acpicpu0: P3: FFH, lat 10 us, pow 22265 mW, 1600 MHz
acpicpu0: P4: FFH, lat 10 us, pow 18904 mW, 1400 MHz
acpicpu0: P5: FFH, lat 10 us, pow 15996 mW, 1200 MHz
acpicpu0: P6: FFH, lat 10 us, pow 12907 mW, 1000 MHz
acpicpu0: P7: FFH, lat 10 us, pow 9956 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2292690640 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wd0 at atabus0 drive 0
wd0: <ADATA SU800>
wd0: drive supports 2-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: USB (0x1a2c) USB Keyboard (0x2d23), rev 1.10/1.10, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1
uhidev1: USB (0x1a2c) USB Keyboard (0x2d23), rev 1.10/1.10, addr 3, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 7 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
acpibat0: normal capacity on 'charge state'