Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2018-08-02 21:19:03
From: Brian
Description: Sun Netra X1
console is /pci@1f,0/isa@7/serial@0,3f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.3-current (GENERIC) #596: Wed Aug  1 20:40:38 MDT 2018
    xxx@xxx.xxx:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1037877248 (989MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Netra X1 (UltraSPARC-IIe 500MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 500 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map 60000000-7fffffff
pci0 at psycho0
ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus0 addr 0-ffff ivec 0x2a not configured
rtc0 at ebus0 addr 70-71: m5819
power0 at ebus0 addr 2000-2007 ivec 0x23
lom0 at ebus0 addr 8010-8011 ivec 0x2a: LOMlite2 rev 3.12
com0 at ebus0 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
"flashprom" at ebus0 addr 0-7ffff not configured
alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x54: 512MB SDRAM registered ECC PC133CL2
spdmem1 at iic0 addr 0x55: 512MB SDRAM registered ECC PC133CL2
dc0 at pci0 dev 12 function 0 "Davicom DM9102" rev 0x31: ivec 0x7c6, address xx:xx:xx:xx:xx:xx
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0
dc1 at pci0 dev 5 function 0 "Davicom DM9102" rev 0x31: ivec 0x7dc, address xx:xx:xx:xx:xx:xx
amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7e4, version 1.0, legacy support
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD800AAJB-00J3A0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@1f,0/ide@d,0/disk@0,0
root on wd0a (a543c38d85e7a2ed.a) swap on wd0b dump on wd0b