Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2018-09-01 17:39:37
From: nullnilaki
Description: NetBSD/vax 8.0 on VAXstation 4000 Model 96
??U?
 
KA49-A V1.4-0D0-V4.4   100 MHZ
08-00-2B-9C-E5-0D
32MB
                                       
?? 001   2     LCSPX  0512

>>> show device

  VMS/VMB      ADDR      DEVTYPE    NUMBYTES     RM/FX    WP    DEVNAM      REV
  -------      ----      -------    --------     -----    --    ------      ---
  EZA0         XX-XX-XX-XX-XX-XX
  DKA200       A/2/0     DISK         9.09GB      FX            BB00922     B016
  DKA300       A/3/0     DISK         9.09GB      FX            BB00922     B016
 ..HostID..    A/6       INITR



>>> boot dka200

 
-DKA200
>> NetBSD/vax boot [1.12 (Tue Jul 17 14:59:51 UTC 2018)] <<
>> Press any key to abort autoboot 0
nfs_open: must mount first.
open netbsd.vax: Device not configured
> boot netbsd
3461332+211888 [245328+227936]=0x3f490c
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
	xxx@xxx.xxx:/usr/src/sys/arch/vax/compile/GENERIC
VAXstation 4000/{90,90A,96}
total memory = 32480 KB
avail memory = 26936 KB
mainbus0 (root)
cpu0 at mainbus0: KA49, NVAX, 10KB L1 cache, 256KB L2 cache
ze0 at mainbus0
ze0: hardware address xx:xx:xx:xx:xx:xx
vsbus0 at mainbus0
vsbus0: 8K entry DMA SGMAP at PA 0x27000000 (VA 0x8413f000)
vsbus0: interrupt mask 0
dz0 at vsbus0 csr 0x25000000 vec 524 ipl 17 maskbit 3
dz0: 4 lines
lkkbd0 at dz0
lkkbd0: no keyboard
wskbd0 at lkkbd0 mux 1
lkms0 at dz0
wsmouse0 at lkms0 mux 0
asc0 at vsbus0 csr 0x26000080 vec 510 ipl 17 maskbit 1
asc0: NCR53C94, 25MHz, SCSI ID 6
scsibus0 at asc0: 8 targets, 8 luns per target
spx0 at vsbus0 csr 0x38000000 vec 514 ipl 15 maskbit 2
spx0: Using QVSS 8x15 font
spx0: RAMDAC ID: 0x4a, Bt459 (SPX/LCSPX) RAMDAC type
wsdisplay0 at spx0 kbdmux 1
vsaudio0 at vsbus0 csr 0x26800000 vec 530 ipl 17 maskbit 3
audio0 at vsaudio0: full duplex, playback, capture, mmap
vsaudio0: Virtual format configured - Format SLINEAR, precision 8, channels 1, frequency 8000
vsaudio0: Latency: 192 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <COMPAQ, BB009222B5, B016> disk fixed
sd0: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd0: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
sd1 at scsibus0 target 3 lun 0: <COMPAQ, BB009222B5, B016> disk fixed
sd1: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd1: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1037> cdrom removable
cd0: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers
label: 71809080
label: 71809080
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/vax/8.0/modules
Sat Sep  2 02:20:19 UTC 2056
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx, services.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Sep  2 02:21:03  postfix[342]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
    /etc/rc.d/postfix
See /var/run/rc.log for more information.
Sat Sep  2 02:21:05 UTC 2056

NetBSD/vax (Amnesiac) (console)

login: root
Sep  2 02:21:12  login: ROOT LOGIN (root) on tty console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018

Welcome to NetBSD!

We recommend that you create a non-root account and use su(1) for root access.
No entry for terminal type "unknown";
using dumb terminal settings.
# uname -a
NetBSD  8.0 NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018  xxx@xxx.xxx:/usr/src/sys/arch/vax/compile/GENERIC vax
#