Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2018-09-02 08:42:18
From: tsutsui
Description: NetBSD/sgimips 8.0 on Indy R5000

Cannot connect to keyboard -- check the cable.
Cannot open keyboard() for input
Cannot connect to keyboard -- check the cable.
Cannot open keyboard() for input


                           Starting up the system...


NetBSD/sgimips 8.0 Bootstrap, Revision 1.5 (Tue Jul 17 14:59:51 UTC 2018)

devopen: scsi(0)disk(1)rdisk(0)partition(0) type scsi file /netbsd
4908464+131360 [267552]=0x54f6c4
phys segment: 0xe000 @ 0x8002000
adding 0xe000 @ 0x8002000 to freelist 0
phys segment: 0x730000 @ 0x8010000
adding 0x58000 @ 0x8010000 to freelist 0
adding 0x190000 @ 0x85b0000 to freelist 0
phys segment: 0xb800000 @ 0x8800000
adding 0xb800000 @ 0x8800000 to freelist 0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC32_IP2x) #0: Tue Jul 17 14:59:51 UTC 2018
	xxx@xxx.xxx:/usr/src/sys/arch/sgimips/compile/GENERIC32_IP2x
total memory = 192 MB
(768 KB reserved for ARCS)
avail memory = 182 MB
WARNING: module error: sequencer: can't find builtin dependency `midi'
mainbus0 (root): SGI-IP22 [SGI, 6909a9b2], 1 processor
cpu0 at mainbus0: MIPS R5000 CPU (0x2310) Rev. 1.0 with built-in FPU Rev. 1.0
cpu0: 48 TLB entries, 16MB max page size
cpu0: 32KB/32B 2-way set-associative L1 instruction cache
cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
cpu0: 512KB/32B direct-mapped write-through L2 data cache
int0 at mainbus0 addr 0x1fbd9880
int0: bus 75MHz, CPU 150MHz
imc0 at mainbus0 addr 0x1fa00000: revision 3
gio0 at imc0
newport0 at gio0: SGI NG1 (board revision 5, cmap revision 5, xmap revision 5, vc2 revision 0), depth 8
wsdisplay0 at newport0 kbdmux 1
hpc0 at gio0: SGI HPC3 (onboard)
zsc0 at hpc0 offset 0x59830
zstty0 at zsc0 channel 1 (console i/o)
zstty1 at zsc0 channel 0
pckbc0 at hpc0 offset 0x59840
sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
sq0: Ethernet address xx:xx:xx:xx:xx:xx
wdsc0 at hpc0 offset 0x44000: WD33C93B (20.0 MHz clock, BURST DMA, SCSI ID 0)
wdsc0: microcode revision 0x0d, Fast SCSI
scsibus0 at wdsc0: 8 targets, 8 luns per target
haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
audio0 at haltwo0: half duplex, playback, capture, mmap
haltwo0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
haltwo0: Latency: 64 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
pi1ppc0 at hpc0 offset 0x59800
pi1ppc0: capabilities=0x8<PS2>
ppbus0 at pi1ppc0
ppbus0: No IEEE1284 device found.
lpt0 at ppbus0: port mode = 0x1<COMPATIBLE>
panel0 at hpc0 offset 0x59850
dsclock0 at mainbus0 addr 0x1fbe0000
ioc0 at mainbus0 addr 0x1fbd9800: rev 0, machine Indy (Guinness), board rev 0
scsibus0: waiting 2 seconds for devices to settle...
WARNING: module error: sequencer: can't find builtin dependency `midi'
sd0 at scsibus0 target 1 lun 0: <IBM, DCAS-32160, S65A> disk fixed
sd0: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
sd0: sync (100.00ns offset 12), 8-bit (10.000MB/s) transfers, tagged queueing
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/sgimips/8.0/modules
pid 1(init): ABI set to O32 (e_flags=0x1007)
Sun Sep  2 07:59:06 GMT 2018
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
/dev/rsd0e: file system is clean; not checking
/dev/rsd0f: file system is clean; not checking
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
kern.no_sa_support: 1 -> 1
ddb.onpanic: 1 -> 0
Starting network.
Hostname: indy
NIS domainname: xxxxxx
IPv6 mode: host
Configuring network interfaces: sq0.
Adding interface aliases:.
add net default: gateway mirage
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Starting rpcbind.
Starting ypbind.
ypbind[185]: Domain xxxxxx is alive; server xxx.xxx.xxx.xxx
Mounting all file systems...
Clearing temporary files.
Starting amd.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Sep  2 16:59:46 indy ntpd[426]: Unable to listen for broadcasts, no broadcast interfaces available
Starting sshd.
Starting inetd.
Starting cron.
Sun Sep  2 17:00:24 JST 2018
Sep  2 17:00:26 indy getty[484]: /dev/ttyE0: Device not configured

NetBSD/sgimips (indy) (ttyZ0)

login: root
Password:
Sep  2 17:00:32 indy login: ROOT LOGIN (root) on tty ttyZ0
Last login: Sun Sep  2 16:57:13 2018 on ttyZ0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC32_IP2x) #0: Tue Jul 17 14:59:51 UTC 2018

Welcome to NetBSD!

Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root access.
indy#