Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Submit your dmesg today.


Date: 2018-09-04 14:19:03
From: tsutsui
Description: NetBSD/sgimips 8.0 on O2 R5000

                         Running power-on diagnostics...



                           Starting up the system...

               To perform system maintenance instead, press <Esc>

NetBSD/sgimips 5.2.3 Bootstrap, Revision 1.5
(xxx@xxx.xxx, Sat Nov 15 21:56:41 UTC 2014)

devopen: pci(0)scsi(0)disk(1)rdisk(0)partition(0) type scsi file /netbsd
6745328+134272 [336160+326897]=0x731c90
phys segment: 0xc000 @ 0x2000
adding 0xc000 @ 0x2000 to freelist 0
phys segment: 0xd40000 @ 0x10000
adding 0x56000 @ 0x10000 to freelist 0
adding 0x5be000 @ 0x792000 to freelist 0
phys segment: 0xec00000 @ 0x1400000
adding 0xec00000 @ 0x1400000 to freelist 0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC32_IP3x) #0: Tue Jul 17 14:59:51 UTC 2018
	xxx@xxx.xxx:/usr/src/sys/arch/sgimips/compile/GENERIC32_IP3x
total memory = 255 MB
(6848 KB reserved for ARCS)
avail memory = 239 MB
mainbus0 (root): SGI-IP32 [SGI, 9], 1 processor
cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0
cpu0: 48 TLB entries, 16MB max page size
cpu0: 32KB/32B 2-way set-associative L1 instruction cache
cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
cpu0: 512KB/32B direct-mapped write-through L2 unified cache
crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161)
crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine
crmfb0: device unusable if not setup by firmware
mace0 at mainbus0 addr 0x1f000000
lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
com0: console
com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller
mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
mec0: Ethernet address xx:xx:xx:xx:xx:xx
nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1
audio0 at mavb0: full duplex, playback, capture, mmap, independent
mavb0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
mavb0: Latency: 256 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
pci0 at macepci0 bus 0
ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc0: interrupting at crime interrupt 8
ahc0: Using left over BIOS settings
ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters
ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc1: interrupting at crime interrupt 9
ahc1: Using left over BIOS settings
ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
tl0 at pci0 dev 3 function 0
tl0: Compaq Netelligent 10/100 TX
tl0: Ethernet address xx:xx:xx:xx:xx:xx
tl0: interrupting at crime interrupt 10
nsphy1 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0 at tl0 phy 31: ThunderLAN 10BASE-T media interface, rev. 5
tlphy0: no media present
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <FUJITSU, MAN3367MC, 0107> disk fixed
sd0: 35003 MB, 29950 cyl, 4 head, 598 sec, 512 bytes/sect x 71687340 sectors
sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> cdrom removable
cd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
WARNING: 2 errors while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/sgimips/8.0/modules
pid 1(init): ABI set to O32 (e_flags=0x1007)
Tue Sep  4 22:32:24 JST 2018
Starting root file system check:
/dev/rsd0a: file system is journaled; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: airtrek
IPv6 mode: host
Configuring network interfaces: mec0.
Adding interface aliases:.
Waiting for DAD to complete for statically configured addresses...
Starting dhcpcd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting inetd.
Starting cron.
Tue Sep  4 22:34:11 JST 2018

NetBSD/sgimips (airtrek) (console)

login: tsutsui
Password:
Sep  4 23:10:04 airtrek login: tsutsui on tty console
Last login: Tue Sep  4 22:34:25 2018 from xxx.xxx.xxx.xxx on pts/0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC32_IP3x) #0: Tue Jul 17 14:59:51 UTC 2018

Welcome to NetBSD!

Hippogriff, n.:
        An animal (now extinct) which was half horse and half griffin.
The griffin was itself a compound creature, half lion and half eagle.
The hippogriff was actually, therefore, only one quarter eagle, which
is two dollars and fifty cents in gold.  The study of zoology is full
of surprises.
                -- Ambrose Bierce, "The Devil's Dictionary"
airtrek-%