Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-10-06 17:38:40
From: Sevan / Venture37
Description: 12 inch iBook G3 600Mhz Late 2001 (PowerBook4,1 640MB RAM, AirPort)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0_STABLE (SEVAN) #3: Fri Aug 31 20:42:38 BST 2018
	xxx@xxx/usr/obj/macppc/sys/arch/macppc/compile/SEVAN
total memory = 640 MB
avail memory = 604 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f2000000/usb@18/disk:0/netbsd
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 3.1), ID 0 (primary)
cpu0: HID0 0x8050c0a4<EMCP,NAP,DPM,ICE,DCE,SGE,BTIC,BHT>, powersave: 1
cpu0: 600.00 MHz, 512KB WB L2 cache
memory0 at mainbus0: len=256
spdmem0 at memory0
spdmem0: SDRAM, no parity or ECC, 512MB, 133MHz (PC-133)
spdmem0: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-44
spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
uni_n0 at mainbus0 address 0xf8000000
ki2c0 at uni_n0 address 0xf8001000
iic1 at ki2c0: I2C bus
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Pangea AGP Interface (rev. 0x00)
r128fb0 at pci0 dev 16 function 0: ATI Technologies Rage Mobility M3 (AGP) (rev. 0x02)
r128fb0: 64 MB aperture at 0x94000000
r128fb0: LVDS output is active, enabling backlight control
wsdisplay0 at r128fb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer Pangea Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x10000: irq 30,1,2
pmu0 at obio0 offset 0x16000 irq 47:  rev. 12
pmu0: initializing RTC
pmu0: initializing ADB
nadb0 at pmu0: Apple Desktop Bus
pmu0: power-mgt not configured
smartbat0 at pmu0 addr 0: smart battery
 flags: 1 AC
ki2c1 at obio0
iic2 at ki2c1: I2C bus
deq0 at ki2c1 Apple Digital Equalizer, addr 0x68
wdc0 at obio0 offset 0x1f000 irq 19, level triggered: DMA transfer
atabus0 at wdc0 channel 0
wi0 at obio0 offset 0x30000 irq 57: 802.11 address 00:30:65:
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.70.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
snapper0: codec: TAS3001
audio0 at snapper0: full duplex, playback, capture, mmap
snapper0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
snapper0: Latency: 256 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
ohci0 at pci1 dev 24 function 0: Apple Computer Pangea USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci1 dev 25 function 0: Apple Computer Pangea USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer Pangea Host-PCI Bridge (rev. 0x00)
fwohci0 at pci2 dev 14 function 0: Apple Computer Pangea Firewire (rev. 0x00)
fwohci0: interrupting at irq 40
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:03:93:ff:fe:
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x00)
gem0: interrupting at irq 41
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: Ethernet address 00:03:93:, 10KB RX fifo, 4KB TX fifo
vmmask 67780000 schedmask 7ff80000 highmask 7ff80000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 24960000 Hz quality 100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
uhub0 at usb0: Apple Computer (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Apple Computer (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8176, , MA26> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2IPsec: Initialized Security Association Processing.
, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK1517GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 14403 MB, 29264 cyl, 16 head, 63 sec, 512 bytes/sect x 29498112 sectors
adbkbd0 at nadb0 addr 2: iBook keyboard
wskbd0 at adbkbd0 mux 1
wskbd0: connecting to wsdisplay0
wsmouse0 at adbkbd0 mux 0
adbms0 at nadb0 addr 3: EMP trackpad
 <tpad> 2-button, 400 dpi
wsmouse1 at adbms0 mux 0
adbbt0 at nadb0 addr 7: button device
AC Power: AC adapter online.
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: SanDisk (0x781) Ultra Fit (0x5583), rev 2.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
ugen0 at uhub1 port 2
ugen0: HCF USB V.90 Data/Fax Modem (0x5ac) Apple internal modem (0x8202), rev 1.10/1.00, addr 2
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra Fit, 1.00> disk removable
sd0: 29327 MB, 59585 cyl, 16 head, 63 sec, 512 bytes/sect x 60062500 sectors
swwdog0: software watchdog initialized
boot device: <unknown>
root device: sd0
dump device (default sd0b): 
file system (default generic): 
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/macppc/8.0/modules
init path (default /sbin/init): 
init: trying /sbin/init
gpiosim0: simulating 64 pins
gpio0 at gpiosim0: 64 pins
lua0: Lua 5.3.5  Copyright (C) 1994-2018 Lua.org, PUC-Rio
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)