Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-06 19:01:14
From: dhw
Description: Work desktop
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #9  r338897M/338897:1102502: Sun Sep 23 04:37:59 PDT 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/common/S1/obj/common/S1/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33165672448 (31629 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-A2   >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 2100046244 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.77  Tue Jul 10 21:54:30 PDT 2018
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-A2> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 32 at device 0.0 on pci3
nvidia0: <Quadro K600> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xd000-0xd0ff mem 0xf287c000-0xf287ffff,0xf2400000-0xf27fffff irq 16 at device 0.0 on pci5
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb300000-0xfb31ffff,0xfb329000-0xfb329fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb328000-0xfb3283ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Patsburg HDA Controller> mem 0xfb320000-0xfb323fff irq 22 at device 27.0 on pci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb100000-0xfb100fff irq 18 at device 0.0 on pci7
xhci0: 32 bytes context size, 64-bit DMA
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb327000-0xfb3273ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb326000-0xfb3267ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib9
pci9: <dasp, performance counters> at device 14.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xd9000-0xd9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa1
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <0x1106 XHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: 5 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1
uhub3 on uhub2
uhub3: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
da2 at isci0 bus 0 scbus0 target 2 lun 0
da1 at isci0 bus 0 scbus0 target 1 lun 0
cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
ses0: da1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0: <PLDS DVD-RW DH16AESH 3L31> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers<ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da2: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 300.000MB/s transfersda1: [_SERIAL_NUMBER_XXXXX]
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 4769307MB (9767541168 512 byte sectors)
 (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

da2: Command Queueing enabled
da2: 4769307MB (9767541168 512 byte sectors)
da0 at isci0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST500DM002-1BD14 KC65> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 476940MB (976773168 512 byte sectors)
da0: quirks=0x8<4K>
Trying to mount root from ufs:/dev/da0s1a [rw]...
uhub3: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub5 on uhub0
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.3: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD> at usbus2
ukbd0 on uhub4
ukbd0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
kbd2 at ukbd0
ugen2.4: <vendor 0x17ef Lenovo Optical USB Mouse> at usbus2
GEOM_ELI: Device da0s4b.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
random: unblocking device.
lo0: link state changed to UP
em0: link state changed to UP
uhid0 on uhub4
uhid0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
ums0 on uhub4
ums0: <vendor 0x17ef Lenovo Optical USB Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 7 7 7 7 1 1 1 1 0 0 0 0 0 done
All buffers synced.
GEOM_ELI: Device da0s4b.eli destroyed.
GEOM_ELI: Detached da0s4b.eli on last close.
Uptime: 6d5h6m14s
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #9  r338897M/338897:1102502: Sun Sep 23 04:37:59 PDT 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/common/S1/obj/common/S1/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33165672448 (31629 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-A2   >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 2100041756 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.77  Tue Jul 10 21:54:30 PDT 2018
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-A2> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 32 at device 0.0 on pci3
nvidia0: <Quadro K600> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xd000-0xd0ff mem 0xf287c000-0xf287ffff,0xf2400000-0xf27fffff irq 16 at device 0.0 on pci5
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb300000-0xfb31ffff,0xfb329000-0xfb329fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb328000-0xfb3283ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Patsburg HDA Controller> mem 0xfb320000-0xfb323fff irq 22 at device 27.0 on pci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb100000-0xfb100fff irq 18 at device 0.0 on pci7
xhci0: 32 bytes context size, 64-bit DMA
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb327000-0xfb3273ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb326000-0xfb3267ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib9
pci9: <dasp, performance counters> at device 14.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xd9000-0xd9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <0x1106 XHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: 5 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1
uhub2: 2 ports with 2 removable, self powered
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
da1 at isci0 bus 0 scbus0 target 1 lun 0
da2 at isci0 bus 0 scbus0 target 2 lun 0
cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
da1: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 300.000MB/s transfers
da1: Command Queueing enabled
cd0: <PLDS DVD-RW DH16AESH 3L31> Removable CD-ROM SCSI device
da2: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 300.000MB/s transfersda1: 4769307MB (9767541168 512 byte sectors)

da2: Command Queueing enabled
da2: 4769307MB (9767541168 512 byte sectors)
da0 at isci0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST500DM002-1BD14 KC65> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 476940MB (976773168 512 byte sectors)
da0: quirks=0x8<4K>
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/da0s2a [rw]...
uhub3: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.3: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD> at usbus2
ukbd0 on uhub4
ukbd0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
kbd2 at ukbd0
GEOM_ELI: Device da0s4b.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
ugen2.4: <vendor 0x17ef Lenovo Optical USB Mouse> at usbus2
random: unblocking device.
lo0: link state changed to UP
em0: link state changed to UP
uhid0 on uhub4
uhid0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
ums0 on uhub4
ums0: <vendor 0x17ef Lenovo Optical USB Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 6 6 6 3 1 1 1 1 0 0 0 0 0 done
All buffers synced.
GEOM_ELI: Device da0s4b.eli destroyed.
GEOM_ELI: Detached da0s4b.eli on last close.
Uptime: 15h21m35s
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #10  r339021M/339021:1102503: Sun Sep 30 04:24:04 PDT 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/common/S2/obj/common/S2/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33165672448 (31629 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-A2   >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #9 Launched!
Timecounter "TSC" frequency 2100046760 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.77  Tue Jul 10 21:54:30 PDT 2018
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-A2> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 32 at device 0.0 on pci3
nvidia0: <Quadro K600> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xd000-0xd0ff mem 0xf287c000-0xf287ffff,0xf2400000-0xf27fffff irq 16 at device 0.0 on pci5
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb300000-0xfb31ffff,0xfb329000-0xfb329fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb328000-0xfb3283ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Patsburg HDA Controller> mem 0xfb320000-0xfb323fff irq 22 at device 27.0 on pci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb100000-0xfb100fff irq 18 at device 0.0 on pci7
xhci0: 32 bytes context size, 64-bit DMA
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb327000-0xfb3273ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb326000-0xfb3267ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib9
pci9: <dasp, performance counters> at device 14.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xd9000-0xd9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa1
ugen1.1: <0x1106 XHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
da1 at isci0 bus 0 scbus0 target 1 lun 0
da2 at isci0 bus 0 scbus0 target 2 lun 0
cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0: <PLDS DVD-RW DH16AESH 3L31> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfersda1: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 300.000MB/s transfersda2: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 4769307MB (9767541168 512 byte sectors)

da2: Command Queueing enabled
da2: 4769307MB (9767541168 512 byte sectors)
 (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at isci0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST500DM002-1BD14 KC65> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 476940MB (976773168 512 byte sectors)
da0: quirks=0x8<4K>
Trying to mount root from ufs:/dev/da0s2a [rw]...
uhub3: 4 ports with 4 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub5 on uhub1
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.3: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD> at usbus2
ukbd0 on uhub5
ukbd0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
kbd2 at ukbd0
ugen2.4: <vendor 0x17ef Lenovo Optical USB Mouse> at usbus2
GEOM_ELI: Device da0s4b.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
random: unblocking device.
lo0: link state changed to UP
em0: link state changed to UP
uhid0 on uhub5
uhid0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
ums0 on uhub5
ums0: <vendor 0x17ef Lenovo Optical USB Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 7 4 4 4 2 1 1 1 1 0 0 0 0 0 done
All buffers synced.
GEOM_ELI: Device da0s4b.eli destroyed.
GEOM_ELI: Detached da0s4b.eli on last close.
Uptime: 2h57m29s
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #10  r339021M/339021:1102503: Sun Sep 30 04:24:04 PDT 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/common/S2/obj/common/S2/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33165672448 (31629 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-A2   >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC" frequency 2100048916 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.77  Tue Jul 10 21:54:30 PDT 2018
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-A2> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 32 at device 0.0 on pci3
nvidia0: <Quadro K600> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xd000-0xd0ff mem 0xf287c000-0xf287ffff,0xf2400000-0xf27fffff irq 16 at device 0.0 on pci5
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb300000-0xfb31ffff,0xfb329000-0xfb329fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb328000-0xfb3283ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Patsburg HDA Controller> mem 0xfb320000-0xfb323fff irq 22 at device 27.0 on pci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb100000-0xfb100fff irq 18 at device 0.0 on pci7
xhci0: 32 bytes context size, 64-bit DMA
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb327000-0xfb3273ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb326000-0xfb3267ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib9
pci9: <dasp, performance counters> at device 14.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xd9000-0xd9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa1
ugen1.1: <0x1106 XHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
da1 at isci0 bus 0 scbus0 target 1 lun 0
da2 at isci0 bus 0 scbus0 target 2 lun 0
cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
ses0: da1: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da2: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
<AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 300.000MB/s transferscd0: <PLDS DVD-RW DH16AESH 3L31> Removable CD-ROM SCSI device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 4769307MB (9767541168 512 byte sectors)
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

da2: Command Queueing enabled
ses0: SEMB SES Device
da2: 4769307MB (9767541168 512 byte sectors)
da0 at isci0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST500DM002-1BD14 KC65> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 476940MB (976773168 512 byte sectors)
da0: quirks=0x8<4K>
Trying to mount root from ufs:/dev/da0s2a [rw]...
uhub3: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.3: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD> at usbus2
ukbd0 on uhub4
ukbd0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
kbd2 at ukbd0
ugen2.4: <vendor 0x17ef Lenovo Optical USB Mouse> at usbus2
GEOM_ELI: Device da0s4b.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
random: unblocking device.
lo0: link state changed to UP
em0: link state changed to UP
uhid0 on uhub4
uhid0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
ums0 on uhub4
ums0: <vendor 0x17ef Lenovo Optical USB Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0
Limiting closed port RST response from 216 to 200 packets/sec
Limiting closed port RST response from 215 to 200 packets/sec
Limiting closed port RST response from 214 to 200 packets/sec
Limiting closed port RST response from 213 to 200 packets/sec
Limiting closed port RST response from 212 to 200 packets/sec
Limiting closed port RST response from 211 to 200 packets/sec
Limiting closed port RST response from 210 to 200 packets/sec
Limiting closed port RST response from 210 to 200 packets/sec
Limiting closed port RST response from 210 to 200 packets/sec
Limiting closed port RST response from 210 to 200 packets/sec
Limiting closed port RST response from 210 to 200 packets/sec
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 8 8 4 4 2 2 0 0 0 0 0 done
All buffers synced.
GEOM_ELI: Device da0s4b.eli destroyed.
GEOM_ELI: Detached da0s4b.eli on last close.
Uptime: 6d4h6m10s
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #10  r339021M/339021:1102503: Sun Sep 30 04:24:04 PDT 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/common/S2/obj/common/S2/src/sys/GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz (2100.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33165672448 (31629 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-A2   >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC" frequency 2100044044 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff8ac0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.77  Tue Jul 10 21:54:30 PDT 2018
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-A2> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 32 at device 0.0 on pci3
nvidia0: <Quadro K600> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e1b) HDA Controller> mem 0xfb080000-0xfb083fff irq 36 at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xd000-0xd0ff mem 0xf287c000-0xf287ffff,0xf2400000-0xf27fffff irq 16 at device 0.0 on pci5
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf040-0xf05f mem 0xfb300000-0xfb31ffff,0xfb329000-0xfb329fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb328000-0xfb3283ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Patsburg HDA Controller> mem 0xfb320000-0xfb323fff irq 22 at device 27.0 on pci0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb100000-0xfb100fff irq 18 at device 0.0 on pci7
xhci0: 32 bytes context size, 64-bit DMA
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb327000-0xfb3273ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfb326000-0xfb3267ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib9
pci9: <dasp, performance counters> at device 14.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.1 (no driver attached)
pci9: <dasp, performance counters> at device 19.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xd9000-0xd9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0042) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0042) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0042) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1
pcm3: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa1
ugen1.1: <0x1106 XHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 5 ports with 4 removable, self powered
ugen1.2: <vendor 0x2109 USB2.0 Hub> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
da2 at isci0 bus 0 scbus0 target 2 lun 0
da1 at isci0 bus 0 scbus0 target 1 lun 0
cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
da1: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 300.000MB/s transfersda2: <ATA ST5000NM0024-1HT SN01> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 300.000MB/s transferscd0: <PLDS DVD-RW DH16AESH 3L31> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers
da1: Command Queueing enabled
da1: 4769307MB (9767541168 512 byte sectors)
 (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

da2: Command Queueing enabled
da2: 4769307MB (9767541168 512 byte sectors)
da0 at isci0 bus 0 scbus0 target 0 lun 0
da0: <ATA ST500DM002-1BD14 KC65> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 476940MB (976773168 512 byte sectors)
da0: quirks=0x8<4K>
Trying to mount root from ufs:/dev/da0s1a [rw]...
uhub3: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.3: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD> at usbus2
ukbd0 on uhub4
ukbd0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
kbd2 at ukbd0
GEOM_ELI: Device da0s4b.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
ugen2.4: <vendor 0x17ef Lenovo Optical USB Mouse> at usbus2
random: unblocking device.
lo0: link state changed to UP
em0: link state changed to UP
uhid0 on uhub4
uhid0: <NOVATEK USB NETVISTA FULL WIDTH KEYBOARD, class 0/0, rev 1.10/1.04, addr 3> on usbus2
ums0 on uhub4
ums0: <vendor 0x17ef Lenovo Optical USB Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0