Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-06 19:53:06
From: cem
Description: Lenovo Thinkpad X230
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-ALPHA6 #9000000 r338698+59ff9aa72cd4(master) amd64 gcc version 6.4.0 (FreeBSD Ports Collection for amd64) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (2594.17-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7964680192 (7595 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-G2 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 3 2 Timecounter "TSC-low" frequency 1297086746 Hz quality 1000 random: entropy device external interface netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff8113d3b0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO TP-G2> on motherboard acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf2520000-0xf252ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) uart2: <Intel Panther Point KT Controller> port 0x50b0-0x50b7 mem 0xf253c000-0xf253cfff irq 19 at device 22.3 on pci0 uart2: Using 1 MSI message em0: <Intel(R) PRO/1000 Network Connection> port 0x5080-0x509f mem 0xf2500000-0xf251ffff,0xf253b000-0xf253bfff irq 20 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf253a000-0xf253a3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac0: <Intel Panther Point HDA Controller> mem 0xf2530000-0xf2533fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pci1: <ACPI PCI bus> on pcib1 sdhci_pci0: <RICOH R5CE823 SD> mem 0xf1d00000-0xf1d000ff irq 16 at device 0.0 on pci1 sdhci_pci0: 1 slot(s) allocated pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 iwn0: <Intel Centrino Advanced-N 6205> mem 0xf1c00000-0xf1c01fff irq 17 at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib3: [GIANT-LOCKED] ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf2539000-0xf25393ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xf2538000-0xf25387ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 (Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC269 (Analog)> at nid 21 and 18 on hdaa0 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 pcm4: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SAMSUNG MZ7TD128HAFV-000L1 DXT04L0Q> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]... ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled acpi_video0: <ACPI video extension> on vgapci0 uhub1: 8 ports with 8 removable, self powered uhub0: 3 ports with 3 removable, self powered wlan0: Ethernet address: [_MAC_XXXXXXXXXX] uhub2: 3 ports with 3 removable, self powered lo0: link state changed to UP iwn0: iwn_read_firmware: ucode rev=0x12a80601 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub4 on uhub2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered wlan0: link state changed to UP uhub4: 8 ports with 8 removable, self powered ugen1.3: <Ricoh Company Ltd. Integrated Camera> at usbus1