Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-06 20:56:51
From: zvv
Description: HP ProBook 430 G2
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-ALPHA8 #41 r339212 GENERIC-NODEBUG amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(efifb): resolution 1024x768 CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (2194.96-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7646085120 (7291 MB) CPU microcode: updated from 0x18 to 0x2b Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM 2246 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-39 on motherboard Launching APs: 1 2 3 Timecounter "TSC-low" frequency 1097481518 Hz quality 1000 random: entropy device external interface module_register_init: MOD_LOAD (vesa, 0xffffffff811496b0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x6> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x7000-0x703f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Broadwell HDA Controller> mem 0xc1410000-0xc1413fff at device 3.0 on pci0 xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xc1400000-0xc140ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) hdac1: <Intel Broadwell HDA Controller> mem 0xc1414000-0xc1417fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <unknown> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0xc1104000-0xc1104fff,0xc1100000-0xc1103fff at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x50800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc1419000-0xc14193ff at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <AHCI SATA controller> port 0x7088-0x708f,0x7094-0x7097,0x7080-0x7087,0x7090-0x7093,0x7060-0x707f mem 0xc1418000-0xc14187ff at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_tz3: <Thermal Zone> on acpi0 acpi_tz4: <Thermal Zone> on acpi0 acpi_tz5: <Thermal Zone> on acpi0 acpi_tz6: <Thermal Zone> on acpi0 acpi_tz7: <Thermal Zone> on acpi0 acpi_syscontainer0: <System Container> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 Timecounters tick every 10.000 msec hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek ALC282 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC282 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC282 (Analog)> at nid 20 and 25 on hdaa1 pcm2: <Realtek ALC282 (Analog)> at nid 33 and 18 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SanDisk SD6SB1M-128G-1006 X231706> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors) Trying to mount root from ufs:/dev/ada0p3 [rw]... ZFS filesystem version: 5 ZFS storage pool version: features support (5000) anon_inodefs_init: uhub1: 15 ports with 15 removable, self powered uhub0: 2 ports with 2 removable, self powered drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Memory usable by graphics device = 4096M [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-2: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-2 [drm] - kern.vt.fb.default_mode [drm] Initialized i915 1.6.0 20170123 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "fb". start FB_INFO: type=11 height=768 width=1366 depth=32 cmsize=16 size=4227072 pbase=0xb0011000 vbase=0xfffff800b0011000 name=drmn0 flags=0x0 stride=5504 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device ugen0.2: <Realtek 802.11n NIC> at usbus0 rtwn0 on uhub1 rtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 1> on usbus0 rtwn0: MAC/BB RTL8188EU, RF 6052 1T1R ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 wlan0: Ethernet address: [_MAC_XXXXXXXXXX] tap0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP re0: link state changed to DOWN uhub2: 8 ports with 8 removable, self powered ugen0.3: <vendor 0x138a product 0x003f> at usbus0 wlan0: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled